Page 1
Label Picture Description QTY
A Left Armrest 1
B Right Armrest 1
C Backrest 1
Caution : You must read this before you proceed
DINING CHAIR
Page 1 OF 6
Page 2
D Seat 1
E Seat Cushion 1
Label Picture Description QTY
①
Bolt (M6*35MM)
13
② Washer 13
③ Allen Key 1
Before Beginning
Assembly:
Page 2 OF 6
Page 3
Step 1
Overview
This Dining Chair has multiple parts and may require up to 30 minutes to assemble. To
give you an overview of the Dining Chair parts, the above picture is to help you put the
various parts into perspective. Please read through the instructions below to familiarise
yourself with the parts and steps before assembly.
Open the carton and place all the parts onto a clean, non-marring surface.
Attach the Backrest(C) to Left Armrest(A) using Bolts(①) and Washers(②) with Allen
Key(③) as shown in the picture.
Do not fully tighten the Bolts.
Occasionally some of the PE Wicker shifts and covers the mounting positions
preventing easy assembly. The PE Wicker should never be cut, but moved away
from the mounting positions.
Page 3 OF 6
Page 4
Step 2
Step 3
Align Right Armrest(B) to Backrest(C) and Sest(D).
Attach Right Armrest(B) to Backrest(C) and Sest(D) using Bolts(①) and Washers(②)
with Allen Key(③) as shown in the picture.
Tighten all Bolts at all joints sequentially.
DO NOT tighten any Bolt fully and then move on to the next one.This may cause
the frame to warp.
Align Seat(D) with Left Armrest(A) and Backrest(C).
Attach Seat(D) to Left Armrest(A) and Backrest(C) using Bolts(①) and Washers(②)
with Allen Key(③) as pictured.
Do not fully tighten the Bolts.
Page 4 OF 6
Page 5
Step 4
Put the Seat Cushion(E) on the Chair.
Your Dining Chair is ready for use.
This Dining Chair can only be used on the flat, level surface.
Page 5 OF 6
Page 6
Page 6 OF 6
Loading...