Orren Ellis ORNE6265 Installation & Assembly

Pod Instruction Sheet

Checklist of Items for Assembly:

1.) Slipcover

2.) Base

Step 1

Find the back of the slipcover and slip over the
back of the chair taking care to line up the seams.
(Illustration A)

Step 2

Next pull the cover over the seat portion of the chair,
making sure that your corners and seams are all
aligned with the edges of the base (Illustration B)

Step 3

At the bottom of the chair, afx the Velcro® piece
to the underside of the chair. It may help to rest
the back of the chair on the floor so you can easily
access the Velcro®. Repeat with remaining sides.
(Illustration C)

Step 4

Finish the cover by sliding your hands down the back
and tucking the excess between the back and seat
adjoining the Velcro® tabs hidden inside (Illustration
D). It is easiest to start at the center, working your
way to the edges. Reverse these steps to remove the
cover for easy care.

Illustration A

Illustration B

Illustration C

Illustration D