Page 1
BLINK™ – Edge lit LED fixture series
With Integrated Dimmable Driver
Thank you for purchasing our product. This fixture has
been manufactured from components with advanced
optoelectronics to ensure high reliability and long life.
Before assembling please read this Operation Manual
carefully and save in a safe place for future reference.
Please note that all electrical connections must be in
accordance with local and National Electrical Code
standards as well as local building codes. In case you are
not familiar with proper wiring connections and building
codes, consult a qualified electrician.
RISK OF ELECTRIC SHOCK – THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE
1.
WITH APPLICABLE INSTALLATION CODES BY A PERSON FAMILIAR WITH MENTIONED
ABOVE CODES AND HAZARDS INVOLVED. DISCONNECT POWER AT CIRCUIT BREAKER
OR FUSE BEFORE INSTALLING OR SERVICING.
2. BEFORE USE OF THE PRODUCT CAREFULLY READ THE WHOLE INSTALLATION INSTRUCTIONS.
THE PRODUCT IS SUITABLE FOR BOTH: DAMP AND WET LOCATIONS.
3.
4.
ASSEMBLE THE PRODUCT ONLY WITH THE USE OF PARTS PROVIDED AND THE HOUSING;
Copyright © 2016
Satco Products, Inc.
All Rights Reserved.
National To ll-Free:
800-43-SAT CO
(800-437-2826)
www. nuvolig hting.com
Distrib ution Center s:
New York, Flo rida,
Texas, W ashington,
Califo rnia, Puer to Rico
Satco Prod ucts Inc.
110 Heartland Blvd.,
Brentwood, NY 11717
PH 631-243-2022
FX 631-243-2027
IMPROPER ASSEMBLY MAY RESULT IN DEVICE FAILING WHICH COULD DAMAGE THE PRODUCT,
5.
PERSONAL PROPERTY OR CAUSE INJURY.
ASSEMBLY SHALL FOLLOW WITH ACCESSORIES DELIVERED WITH THE SET ONLY.
6.
THE DEVICE IS NOT A TOY, KEEP OUT OF REACH OF CHILDREN.
Specifications:
Flus h Mo un t Light
Oper at in g Voltag e: 1 20 V
Dimm in g: L ED rate d Co ntrol s
Powe r co ns umpti on : 10.5W /1 3. 5W/18 .5 W
Page 2
Loading...