Page 1
Caution : You must read this before you proceed
Bar Chair
Page 1 OF 7
Page 2
Label Picture Description QTY
A Backrest 1
B
Chair Seat 1
C
Left Metal Tube
（with pre-installed
levellers)
1
D
Right Metal Tube
（with pre-installed
levellers)
1
E
Top Connecting
Tube
1
F
Bottom Connecting
Tube
1
Page 2 OF 7
Page 3
Label Picture Description QTY
① Bolt (M6*14mm) 11
②
Bolt (M6*32mm) 5
③
Bolt (M6*32mm) 3
④
Washer 5
⑤
Spring Washer 5
⑥
Allen Key 1
Before
Beginning
Assembly:
Page 3 OF 7
Page 4
Step 1
Step 2
Overview
This Coffee Table has multiple parts and may require up to 30 minutes to
assemble. To give you an overview of the Coffee Table, the above picture is to
help you put the various parts into perspective. Please read through the
instructions below to familiarise yourself with the parts and steps before assembly.
Place the Backrest(A), Chair Seat(B),Left Metal Tube(C) ,Right Metal Tube(D),Top
Connecting Tube(E) and Bottom connecting Tube(F) on a clean, non-marring
surface.
2.1) Insert the Top Connecting Tube(E) and Bottom connecting Tube(F) into Left
Metal Tube(C) as pictured above.
2.2)Attach the Top Connecting Tube(E) and Bottom connecting Tube(F) to Left
Metal Tube(C) using Bolts(①) with Allen Key(⑥).
Tighten the Bolts fully in a sequential manner.
A
B C
2.1
2.2
FRONT
D
E
F
Chair Seat (B)
Backreat
(A)
Left Metal Tube(C)
Right Metal Tube(D)
Top Connecting
tube (E)
Bottom Connecting
tube (F)
Page 4 OF 7
Page 5
Step 3
Step 4
Step 5
3.1)Insert the Right Metal Tube(D) into Top Connecting Tube(E) and Bottom
connecting Tube(F) as pictures above.
3.2) Attach the Right Metal Tube(D) to Top Connecting Tube(E) and Bottom
connecting Tube(F) using Bolts(①) with Allen Key(⑥).
Tighten the Bolts fully in a sequential manner.
With the help from your partner,turn the Barchair frame bottom skyward, insert and
attch the Seat (B) to Top connected Tube(E),using Bolt(②),Bolt(④),Bolt(⑤) with
Allen Key(⑥).
Stand the Bar Chair and attach Backrest(A) to the Right Metal Tube(D) and Top
Connecting Tube(E) using Bolt(③) with Allen Key(⑥).
3.1
3.2
E
4.2
4.1
Page 5 OF 7
Page 6
Step 6
Step 7
Adjust the Pre-installed Levellers at the bottom of the Backrest(A) to the Right
Metal Tube(D) and Top Connecting Tube(E) until the Bar Chair is level with the
ground.
Your Bar Chair ready for use.
This Bar Chair can only be used on a flat, level surface.
Page 6 OF 7
Page 7
Page 7 OF 7
Loading...