Orlaco IM0973510 R1-2 Installation Manual

ORLACO

ORLACO PRODUCTS BV

Albert Plesmanstraat 42, 3772 MN Barneveld
PO Box 193, 3770 AD Barneveld
The Netherlands

Phone: [phone]
E-mail: [e-mail]
Internet: www.orlaco.com

Orlaco is a Manufacturing company that specializes in
making cameras and monitor systems for commercial
vehicles, fork-lift trucks, cranes, off shore and maritime.
Our objective is to design and produce camera systems for
the professional market that improve the drivers’ view and
increase operating efficiency.
At our facility in Barneveld we locate our design,
manufacturing, warehousing and service department.
Vision is our mission®. Orlaco therefore deploys the
development, manufacture, supply and service of camera
and display systems that will improve safety and efficiency
of all vehicles, machinery and vessels. Our systems give the end user a view on each blind
spot and will create comfort and improved working conditions. Our active approach will
support market demands and innovations and will lead to enthusiastic ambassadors in the
market; our customers.

For more information: www.orlaco.com

Camera FAMOS

Installation manual
Including specifications
No. IM0973510 R1-2

1/2015
English

IM0973510 R1-2

2

Before you start using this equipment, please read this manual carefully and
follow all instructions. We recommend that you keep this manual in a safe place
for reference purposes.

If you have any questions or issues concerning the operation of this equipment,
consult the relevant section in the manual or contact the Orlaco Products BV
Service department.

The camera/display systems from Orlaco comply with the latest CE, ADR, EMC
and mirror-directive regulations. All products are manufactured in accordance
with the ISO 9001 quality management, ISO/TS16949 quality automotive and
ISO 14001 environmental management.

Compact Camera

Type FAMOS PAL NTSC

Safety
In order to guarantee safe operation, these safety instructions must
be read before you start using this equipment.

• Do not open the enclosure. This can cause damage, short-circuiting or
electrical shocks.

• Do not expose the equipment to extreme temperatures. This can cause defor-
mation of the enclosure or damage to internal components.

• Repairs may only be undertaken by the manufacturer.

• The equipment must be assembled as shown in this manual.

Installation manual

11

Installation manual

5. Disposal

Disassembly, removal and disposal. Local regulations for dealing with waste
must be followed when disposing of disassembled components or entire units.

6. General terms and conditions

Orlaco Products BV is not liable for damage resulting from inadequate servicing,
incorrect usage or alterations made to the equipment without informing the
manufacturer in writing.
This installation manual has been made available by Orlaco Products BV.
All rights reserved. No part of this manual may be reproduced and/or made
public in printed form, in photocopy form or on microfilm, or in any other way,
without the prior written permission of Orlaco. This also applies to the associa­ted drawings and figures.
Orlaco reserves the right to make changes to components at any time without
informing customers beforehand or directly. All dimensions given are for com­mercial purposes.
For information regarding repairs that is not covered in this manual, please
contact the Orlaco Products BV service department.
This manual has been prepared with all due care and attention. However, Orlaco
Products BV cannot be held responsible for any errors in this manual or any
consequences thereof.

7. Revision details

R1-0. First issue, January 2015.
R1-1. Specifications changed, page 8, February 2015.
R1-2. Camera lenses(page 8) and Friction pad added(page 4), October 2015.