Orion Technology OR-iNVR08, OR-iNVR16 User Manual

Network Video Recording
Surveillance System

User Manual

※

The picture & functions & supplied items might differ according to the specification and model.

※

Contents of this user manual are protected under copyrights and computer program laws.

Model : OR-iNVR08 & OR-iNVR16

Please read this User Manual and retain it for future reference.

WARNING

TO REDUCE FIRE OR SHOCK HAZARD,

DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.

The installation should be made by a qualified service person

and conformed to all local codes.

3333

Cautions

Read Before System Operation

Follow these details to prevent material damage or personal injury.

Signs of Caution and Warning

Warning: This sign indicates that the user could die or be seriously wounded if not used or installed

properly.

Caution: This sign indicates that the user could be wounded or could expect property damage if not

used or installed properly.

Warning: Do not expose the product to fog, rain or too much humid to decrease danger from electric

shock or fire.

General Warning

Warning

1. Use the power cord, which is supplied or recommended by the supplier, or
it may cause fire.

2. Do not disassemble or reassemble the product.

It may cause malfunction or fire.

3. Enquire to your vendor for repair.

It may cause electric shock or fire if the repair is not done properly.

4. Do not touch the product with wet hands.

It may cause malfunction or electric shock.

5. Product installation must be ensured to a professional for product installation, or

it may cause malfunction, electric shock or fire.

6. Ground applies to video products equipped with a 3-wire grounding type plug having a third (grounding) pin.

This plug only fits into a grounding-type power outlet.
If grounding is not done, it may cause malfunction or electric shock.

7. Ground connection must not touch gas pipe, water pipe or telephone line.

If grounding is not done properly, it may cause electric shock.

8. Prevent metallic foreign substance from going inside the product.

It may cause malfunction or electric shock.

9. Do not spray insecticide or flammable spray while driving.

It may cause fire.

10. Place the system in a open place where air ventilation is guaranteed, or
it may cause over-heating and seriously damage the system to be fired.

11. Prevent water from instilling inside electrical parts.
Clean with a dry towel or malfunction or electric shock could result.

Caution

1. Use the power cord, which is supplied or recommended by the supplier.
The internal fan rotates at high speed and may cause an accident.

2. Do not drop, give strong vibration, or shock to the product.

It may cause malfunction.

3. The air inhaler of the front panel and air outlet of the back panel must not be blocked during installation.

The internal temperature of the product would be greater than allowable and could cause malfunction or
fire.

4. Do not touch the product or the power cord when there is thunder.

It may cause electric shock.

5. Do not install the product near or on top of heating source.

The internal temperature of the product would be greater than allowable and could cause malfunction or
fire.

6. Do not install the product on inclined or unstable location or where vibration could be committed.

It may cause malfunction.

Cautions about the Power

Warning

1. Must use the outlet of the grounding to connect the power cord, or

it may cause fire.

2. Do not connect on the middle of power cord or use extension cord.

It may generate heat or cause fire.

3. Do not touch the power cord with wet hands.

It may cause electric shock.

4. Keep power cord dry and protect from humidity.

It may generate heat or cause fire. The power cord is not waterproof.

5. Hold the body of the plug while removing the power plug.

Do not pull the power cord. Damage to the power cord may generate heat or cause fire.

6. Check the power plug regularly.

Humidity and moderation in smoking may cause fire.

7. Remove power cord from outlet when product is not used for a long time.

It may cause short-circuit or electric shock.

Caution

1. Do not turn off the power by removal of the power plug.

To turn off the power, click the power button from the front panel.
When the system stops abnormally, the power button might not work. Click power button for 5 full seconds to turn
power off.

2. Do not cut off the power artificially, or give shock or vibration to unit while the hard disk is activating.

It may cause hard disk failure or loss of data.

Remarks

※

Pictures and buttons are subject to be changed or modified up to different models.

※

Function or configuration is subject to be changed or modified without prior notice for improvement of the product.

1111

Contents

ContentsContents

Contents

1. GETTING STARTED ..................................................................................................................................................................... 2

1.1 Checking Supplied Items.................................... ....................... ....................... ...................... ....................... ....................... ................. 2

1.2 System Requirements ....... ....................... ....................... ....................... ...................... ....................... ....................... ....................... ..... 3

1.3 System Preparation ............................................. ....................... ....................... ...................... ....................... ....................... ................. 3

1.4 System Startup ...................................... ....................... ....................... ....................... ...................... ....................... ....................... ......... 4

1.5 System Shutdown ........................... ....................... ....................... ....................... ...................... ....................... ....................... ............... 7

1.6 Factory Default ........................... ....................... ...................... ....................... ....................... ....................... ....................... ..................... 7

2. INITIAL SETUP(QUICK SETUP) ................................................................................................................................................... 8

3. CUSTOM SETUP ........................................................................................................................................................................ 11

3.1 Video Setup ................................. ....................... ...................... ....................... ....................... ....................... ....................... .................... 11

3.1.1. Registration .................................................................................................. 11

3.1.2. Video Setup .................................................................................................. 12

3.2 Record .................... ....................... ....................... ....................... ...................... ....................... ....................... ....................... .................. 12

3.2.1. Schedule Setup .............................................................................................. 12

3.2.2. Event Setup .................................................................................................. 13

3.2.3. Notification ................................................................................................... 13

3.3 Network .................. ....................... ....................... ....................... ...................... ....................... ....................... ....................... .................. 14

3.4 User Management ........................................ ....................... ....................... ....................... ....................... ....................... ...................... 15

3.4.1. Administrator ................................................................................................. 15

3.4.2. General User ................................................................................................. 15

3.5 System Operation ............................. ....................... ....................... ....................... ....................... ...................... ....................... ............ 16

3.5.1. Date & Time .................................................................................................. 16

3.5.2. HDD Configuration .......................................................................................... 16

3.5.3. Configuration Backup/Restore ............................................................................ 16

3.5.4. Local (USB) Backup ........................................................................................ 16

3.5.5. Firmware Upgrade .......................................................................................... 16

3.5.6. Factory Default .............................................................................................. 17

3.6 Log ................................ ....................... ....................... ....................... ...................... ....................... ....................... ....................... ............ 17

3.6.1. System Log ................................................................................................... 17

3.6.2. Event Log ..................................................................................................... 17

3.7 Live Monitoring .... ....................... ....................... ....................... ...................... ....................... ....................... ....................... .................. 18

3.7.1. Screen Mode ................................................................................................. 18

3.7.2. Setup each Channel ........................................................................................ 18

3.7.3. PTZ Control .................................................................................................. 20

3.8 VOD Monitoring ............................................ ....................... ....................... ...................... ....................... ....................... ....................... 21

4. Q&A ............................................................................................................................................................................................ 22

2222

1.

Getting Started

Thanks for purchasing OR-iNVR.
OR-iNVR is Network Video recorder from various ONVIF™ based IP devices and supports remote playback &
transmission data.
OR-iNVR is working on Java™ platform and provides browser free in monitoring & setup in various WEB
browsers.

1.1 Checking Supplied Items

Make sure that you have following items supplied with your DVR. If any of these items is missing or damaged,
notify your vendor immediately. Keep the packing utilities for moving or storage purposes afterwards.

Items

Photo

Quantity

3333

1.2 System Requirements

[Windows OS]

Category Recommended Minimum

OS Windows 7 or higher Windows 7 or higher
CPU Inter 3rd Gen. Core i7 Intel Core i3
RAM 8GB 4GB

VGA

1280x1024 or Higher
(with Independent VGA card)

1366X768 or Higher
(with Independent VGA card)

Java™ Java™ version 7 or Higher Java™ version 6 or Higher

[MAC OS]

Category Recommended Minimum

OS MAC OSX 10.7 or higher MAC OSX 10.7
CPU Intel MAC core i7 Intel core i5
RAM 8GB 4GB

VGA

1280x1024 or Higher
(with Independent VGA card)

1366X768 or Higher
(with Independent VGA card)

Java™ Installed in the OS Installed in the OS

[Linux]

Category Recommended Minimum

OS Linux 2.6 or Higher Linux 2.6 or Higher
CPU Inter 3rd Gen Core i7 Intel Core i3
RAM 8GB 4GB

VGA

1280x1024 or Higher
(with Independent VGA card)

1366X768 or Higher
(with Independent VGA card)

Java™ Java™ version 7 or Higher Java™ version 6 or Higher

1.3 System Preparation

OR-iNVR is working on a Java™ platform, Java™ runtime should be installed in the PC.

If this is not installed in your PC, install Java™.

The latest version of Java™, can be downloaded from the webpage. (http://java.com/)

N

OTE

1) User can install Java™ by clicking “Free JAVA Download” button in the main page of
Java™ homepage.

2) There are two versions of Java™, 32bit edition & 64bit edition. It should be followed to
that of WEB browser edition, not the OS edition.

N

OTE

In case of Windows IE(Internet Explorer), Java™ detects IE version automatically. But, in
case of the other browsers(ex. Google Chrome, etc.), it can be installed as plug-in type and
installation message will be shown in the browser.

4444

1.4 System Startup

Network setup is necessary before using OR-iNVR.

If you know the assigned IP to OR-iNVR, you can connect to OR-iNVR with the IP and reset it in the setup
screen.
If you don’t know assigned IP, run IP Installer to find devices.(IP installer is included on CD)

*IP Installer & OR-iNVR should be in the same Subnet Mask.

[Device Search]

1. Check if OR-iNVR is placed in same subnet mask with IP Installer.

2. Click ‘Device Search’ button of IP Installer.
*If TCP Port of OR-iNVR was changed, TCP Port for search should be changed before searching
devices.

3. IP Installer shows device list which is connected in the same network.

Note

When you execute IP Installer, Windows may pop up warning message screen. In this
case, you need to click “Yes” to run the program.

If there is no search result shown, even though IP Installer & OR-iNVR uses same
Subnet Mask and OR-iNVR is running, please check if the firewall option is on. In this
case, stop Windows firewall or related program and try it again.

And, IP Installer searches devices with broadcast method. So, please also check if the
firewall or router or switch doesn’t allow broadcast communication.
For the detail, please consult your network administrator.