Orion Technology OR-7500FD User Manual
User’s Manual
OR-7500FD
Premium Entry Level Real
-
Time
HD
-
SDI
DVR
▪ Triple Streaming / Digital Zoom
▪ Advanced User Authority Level
▪ Max 128ch CMS Client S/W
▪ POS (Text Insert Function)
User’s Manual OR-7500FD Series
1
Preface
We welcome you as a new user of the world's best digital video recorder (DVR) and leading
Digital Video Surveillance System. For best use of this product, read this manual carefully and
keep this manual close to your hand.
Copyright/Authentication/Trademark/Limited Warranty
Copyright
Copyright (c)2012. Orion Technology . All rights reserved. All contents and pictures cannot be
copied without permission.
Authentication
CE, FCC, KCC
Trademark
Ethernet(TM) is a trademark of Xerox Corporation.
Microsoft(TM), MS-DOS(TM), Windows(TM logo), Windows(TM) and Windows NT(TM) are a
trademark of Microsoft Corporation, used in the United States and elsewhere.
Limited Warranty
• The manufacturer, importer and agent shall not be responsible for accidental damage (including
injury) and other damage caused by inappropriate use or operation of this product.
• The information in this manual is prepared based on the current specifications of this product.
The manufacturer would add new functions and continue to upgrade the product with new
technology. All specifications can be subject to change without prior notice.
Cautions
We strongly recommend that users read all safety cautions carefully before operating the product
and safe operation.
Following signals contain critical safety information, they must be fully complied with. The
cautions are categorized into Danger, Warning, Caution and Important.
Risk of death or serious injury.
This is the highest priority danger warning.
Risk of serious or less degree of injury.
May also cause damage to the product or to property.
Risk of minor injury or damage.
Requirements or limitations regarding operation. Users are
recommended to read the relevant details carefully so as to
operate the product properly and without harm.
The above cautions indicate damage level which could occurred due to inappropriate system use
User’s Manual OR-7500FD Series
2
Risk of death or serious injury.
This is the highest priority danger warning.
• RISK OF EXPLOSION IF BATTERY IS REPLACED BY INCORRECT TYPE. DISPOSE OF USED
BATTERY ACCORDING TO THE INSTRCTIONS.
• THIS EQUIPMENT IS INDOOR USE AND ALL THE COMMUNICATION WIRINGS ARE LIMITED TO
INSIDE OF THE BUILDING.
• Please connect the power cord only to the type of AC outlet indicated in the manual or product
specification. If connected to other types of power outlet, fire and electric shock may result.
• Do not expose the product to moisture and dampness. Doing so may result in fire and electric
shock.
• Do not place heavy objects on top of the power cord. Damage to the power cord may result in
fire and electric shock.
• Do not place containers with liquid or small metal objects on top of the product. Liquid or small
metal objects getting into the unit may lead to fire and electric shock.
• Do not score, bend, twist, pull or heat the power cord. Damage to the power cord may lead to
fire and electric shock.
• Do not remove the top casing of the product. Doing so may result in electric shock. If internal
examination and maintenance are deemed necessary, contact the authorized system vendors
or installers.
• Do not modify the product in any way. Doing so may lead to fire and electric shock.
• In case of lightning, immediately turn off the power switch and remove the power cord from
the power outlet. Failure to do so may result in fire and electric shock.
• Please use only the power cord supplied with the product. Use of other power cords may result
in fire and electric shock.
• In case of smoke, smell or noise, immediately turn off the power switch and remove the power
cord from the power outlet. Continued operation of the product may result in fire and electric
shock. Request a maintenance service from the authorized system vendors or installers.
• If the product is dropped or damaged, turn off the power switch and remove the power cord
from the power outlet. Continued operation of the product may result in fire and electric shock.
Users should request a maintenance service from the authorized system vendors or installers.
• Do not touch the product with wet hands. Doing so may result in electric shock.
Risk of serious or lesser degree of injury.
May also cause damage to the product or to property.
• Do not leave the power cord or other cables in passageways. Passers-by may trip and fall.
• Avoid contact with water or beverages. Contact with water or beverages may result in damage
that cannot be repaired.
• In case of lightning, immediately turn off the power switch and remove the power cord from
the power outlet. The product may otherwise be damaged.
• Excessive current from the product and the camera may result in an electric shock. Connect the
power cord to an external device only when the products themselves are disconnected from
their power supply.
User’s Manual OR-7500FD Series
3
Risk of minor injury or damage.
• If a foreign substance is stuck to the product, remove it using a soft cloth or tissue. Do not use
chemical agents (thinner, solvent, etc.) to remove the substance.
• Do not operate or store the product in the following places.
- An area that is either too cold or too hot
- An area of high humidity, or in front of an air-conditioner, or in places subject to sudden
temperature changes
- An area where there is excessive dust
- Areas where heat from the product cannot be emitted through both of the product's side
ventilation openings
• Do not place credit cards/telephone cards/bank account books/tickets and other objects with
magnetic properties near the product.
• Static electricity may cause damage to the internal parts of the product. Please remove static
electricity from your body before touching the rear panel and internal electronic parts of the
product.
• If this product is damaged beyond repair or reaches its maximum service life, dispose of it in
compliance with local laws and regulations regarding the disposal of lead and plastic waste.
Requirements or limitations regarding operation. Users are
recommended to read the relevant details carefully so as to
operate the product properly and without harm.
• The product may not work properly if the power source is unstable or and if electric shock
occurs. Make sure the correct rated power is available.
• The product is designed to be proof against electric power failures; however, damage may
occur as a result of power failure. Current data may be damaged or data might not be
recorded. Make sure to use an Uninterruptible Power Supply (UPS).
• Since the product is designed to record video data on the hard disk, an error in the hard disk or
other miscellaneous errors might prevent the product from recording properly. Periodic
maintenance is required for proper operation of the product.
• The product is designed for users to configure their own interface. However a user
configuration error could lead to operation malfunction. This product should be set up by
certified installers only.
• Since the product is connected - and tightly coupled - to exterior accessories (camera, sensor,
LAN, Hard Disk, etc.), there is a risk of malfunction from external causes. Ensure periodic
maintenance by the certified installers.
• Use the rack mounting handle provided with the product for installation.
• In this product, 1 Kbyte equals 1,024 bytes, 1 Mbyte equals 1,048,576 bytes and 1 Gbyte
equals 1,073,700,000 bytes.
User’s Manual OR-7500FD Series
4
Contents
Preface ............................................................................................... 0
Contents ............................................................................................. 4
Chapter 1. Introduction ..................................................................... 7
1. The System ......................................................................................................... 7
2. General Features ................................................................................................ 7
3. Specification ....................................................................................................... 8
Chapter 2. System Installation .......................................................... 9
1. Package Contents ............................................................................................... 9
2. Connecting Devices .......................................................................................... 10
3. Cautions............................................................................................................ 12
Chapter 3. Using DVR ....................................................................... 13
1. Basic Operation ................................................................................................ 13
1-1. Front Panel & IR Remote Controller ................................................................... 13
1-2. Turning on the System ...................................................................................... 14
1-3. Menu Bar ......................................................................................................... 14
1-4. Display Icons ................................................................................................... 15
1-5. User or Admin Login ......................................................................................... 16
1-6. The Main Menu ................................................................................................ 17
1-7. Contextual Menu .............................................................................................. 18
2. DVR Configuration ............................................................................................ 19
2-1. SYSTEM ........................................................................................................... 19
2-1-1. MENU > SYSTEM > Information .............................................................. 19
2-1-2. MENU > SYSTEM > Date & Time ............................................................. 20
2-1-3. MENU > SYSTEM > USER .................................................................. 21
2-1-4. MENU > SYSTEM > QUICK SETUP .................................................... 22
2-1-5. MENU > SYSTEM > SYSTEM LOG ..................................................... 22
In the System Log, full list of system logs can be searched. ................................ 22
2-2. DEVICE ............................................................................................................ 23
2-2-1. MENU > DEVICE > Camera ..................................................................... 23
2-2-2. MENU > DEVICE > Audio ........................................................................ 24
2-2-3. MENU > DEVICE > Alarm........................................................................ 24
2-2-4. MENU > DEVICE > Keyboard .................................................................. 25
2-2-5. MENU > DEVICE > RS232 & RS485 ......................................................... 25
2-3. DISPLAY .......................................................................................................... 26
2-3-1. MENU > DISPLAY > Display .................................................................... 26
2-3-2. MENU > DISPLAY > CVBS ....................................................................... 27
2-4. RECORD .......................................................................................................... 28
2-4-1. MENU > RECORD > Storage ................................................................... 28
2-4-2. MENU > RECORD > Record..................................................................... 28
2-4-3. MENU > RECORD > Utilities .................................................................... 30
2-5. NETWORK ....................................................................................................... 31
2-5-1. MENU > NETWORK > Address ................................................................ 31
2-5-2. MENU > NETWORK > DDNS ................................................................... 32
2-5-3. MENU > NETWORK > Notification ........................................................... 32
2-5-4. MENU > NETWORK > Transmission ......................................................... 33
2-6. EVENT ............................................................................................................. 34
2-6-1. MENU > EVENT > Sensor ....................................................................... 34
User’s Manual OR-7500FD Series
5
2-6-2. MENU > EVENT > Motion ....................................................................... 35
2-6-3. MENU > EVENT > Video Loss .................................................................. 37
2-6-4. MENU > EVENT > Text-In ....................................................................... 38
2-6-5. MENU > EVENT > System ....................................................................... 40
3. Playback ........................................................................................................... 41
3-1. Go to Time....................................................................................................... 42
3-2. Calendar Search ............................................................................................... 42
3-3. Event Search .................................................................................................... 42
3-4. Text-In Search .................................................................................................. 43
3-5. Backup Data Playback ...................................................................................... 44
3-6. Playback Control .............................................................................................. 44
4. Backup .............................................................................................................. 45
4-1. Backup ............................................................................................................ 45
4-2. Instant Backup ................................................................................................. 46
4-3. Clip Maker........................................................................................................ 46
Chapter 4. Remote Software ........................................................... 47
1. Using Remote Software .................................................................................... 47
1-1. Starting the Software........................................................................................ 47
1-2. Site Set Up ...................................................................................................... 49
1-3. Favorite Set Up ................................................................................................ 51
1-3. Site List Panel .................................................................................................. 52
1-4. Tool Panel ........................................................................................................ 53
1-4-1. DVR Status ............................................................................................. 53
1-4-2. PTZ ....................................................................................................... 53
1-4-3. TEXT-IN ................................................................................................. 54
1-4-4. GPS ....................................................................................................... 54
2. Remote Playback .............................................................................................. 55
2-1. Calendar Search ............................................................................................... 55
2-2. Event Search .................................................................................................... 56
2-3. Text-In Search.................................................................................................. 57
2-4. Saving recorded data ........................................................................................ 58
2-5. Play Backup Data ............................................................................................. 59
2-6. Play Independent HDD Data on PC .................................................................... 60
3. Setup ................................................................................................................ 61
3-1. Remote Software Setup .................................................................................... 61
3-2. Remote DVR Setup ........................................................................................... 65
3-3. Remote Upgrade .............................................................................................. 66
4. Callback ............................................................................................................ 67
Appendix A. Remote Access Using I.E. ............................................ 69
Appendix B. How to set DDNS using router ..................................... 70
1. Domain Name Creation ................................................................................. 70
2. Router Configuration ..................................................................................... 72
3. DVR Configuration ........................................................................................ 73
Appendix C. Digital Signage Maker .................................................. 74
1. How to use Digital Signage Maker ........................................................................ 75
a. Select Source Video File ................................................................................ 75
b. Select Output Device .................................................................................... 75
c. Enter Output File Name ................................................................................. 75
d. Select Video Type ......................................................................................... 75
e. Click Start Button .......................................................................................... 75
User’s Manual OR-7500FD Series
6
F. Import Digital Signage File into DVR ............................................................... 76
Appendix D. NEMON Network Archive Instructions ........................ 77
1. Outline ............................................................................................................... 77
2. Feature ............................................................................................................... 77
3. How to use Network Archiver ............................................................................... 78
Step 1) Entering Archiving Site address and following information for a site registrati
on and log-in. ................................................................................................... 78
Step 2) Selecting a starting point of data for Remote Archiving. .......................... 79
Step 3) Setting performing schedule for Archiving. ............................................. 80
Step 4) Creating Storage Group. (refer to 4-D for the detail) ............................... 81
4. Set Up ................................................................................................................ 82
A. Main Screen ................................................................................................. 82
B. Tool Bar ....................................................................................................... 83
................................................................................... 83
C. Detail Information ........................................................................................ 84
D. Storage Manager .......................................................................................... 86
E. Log .............................................................................................................. 87
F. System Tray .................................................................................................. 87
5. Reference ........................................................................................................... 88
COMPLIANCE NOTICE OF FCC: ............................................................................. 89
WEEE (Waste Electrical & Electronic Equipment) ................................................. 89
ROHS Compliance ................................................................................................. 89
User’s Manual OR-7500FD Series
7
Chapter 1. Introduction
1. The System
This product is targeted at expanding DVR market. As the market is expanding from Professional
to Consumer and into wider sectors, both price and feature oriented products are highly
demanded in these days across different market sectors. This product is designed to fulfill these
various aspects of different market sectors. Highly affordable, reliable and usable DVR series to
fulfill basic needs of DVR with the most satisfactions.
2. General Features
• Standard H.264 video compression
• Provide Ultimate reliability with embedded linux System
• Dedicated Database structure for more stability.
• Support Full HD(1920x1080), HD(1280x720) resolution.
• CMS(Central Monitoring System) support
• Easy Setup same like DVR GUI in CMS.
• Web Monitoring, Searching and Setup
• Own Media Player for Backup Playback
• Dual USB Ports for Mouse operation, Multi USB Hub and Backup
• Up to two SATA HDDs available and limitless Capacity
• Two- Way Audio
• DVRs can be operated with Keyboard Controller
• Text-In & Relay Output Support
• Real Time Recording and Multi Ch. Playback
• Dual streaming with different resolutions in recording and remote transmission
• Digital Zoom Feature
User’s Manual OR-7500FD Series
8
3. Specification
Model OR-7502FD
OR-7504FD
Video
In 2 BNC (No Loop-out)
4 BNC (No Loop
-
out)
Out 1 HDMI, 1 VGA , 2 CVBS (Spot)
Audio
In 2 RCA (Line Input)
4 RCA Line
-in
Out 1 HDMI, 1 RCA (Line Output), 2 RCA (Spot)
Device
Sensor Input 3 TTL (2+Emergency)
4TTL
Alarm output 2 TTL
2OC
I/O Interface RS232, RS485, USB x 2(Front)
Display
Speed Realtime
Resolution 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768
Split mode
1, 4 (2:Live + 2:Playback)
,
PIP, Digital Zoom
1, 4, PIP, Digital Zoom Live +
Playback / PFRM
Recording
Compression Hardware H.264 codec
Speed/
Resolution
60fps@Full HD(1080p)
60fps@HD(720p)
60fps@Full HD(1080p)
120fps@HD(720p)
Picture Quality Very High, High, Standard, Low
Mode Time-lapse, Event, Time & Event, Emergency (Panic)
Playback
Display
1, 4 (2:Live + 2:playback)
,
Digital Zoom
1, 4, PIP, Digital Zoom Live +
Playback / PFRM
Search Mode Calendar Search, Event Search, Text-In Search, Go to Time
Playback Mode
Multi Channel Normal & Reverse Play,
RW & FF ( x2, x4, x8, x16, x32), Frame to Frame, Pause
Network
Interface Ethernet (10/100/1000 Base)
Protocol TCP/IP, HTTP, DHCP, ADSL(PPPoE)
Application Live, Playback, Setup, Notification (Callback, E-Mail)
Web browser Internet Explorer 7 or higher
Storage 2 x SATA HDD or SSD
Backup External HDD(USB), External USB memory.
Control
Front Panel Button, USB Mouse,
IR Remote Controller, Joystick Controller
OSD Graphic User Interface (Multilingual)
Approval FCC, CE, KCC
ROHS RoHS Compliance
Power consumption DC12V, 5A (60W)
Operating Temp. 5°C ~ 40°C / 41°F~104°F
Operating homidu 0%~80% / non-condensing
Dimension 340(W)x67(H)x267(D)mm / 13.39(W)x2.64(H)x10.43(D)inch
Weight 2Kg / 4.4lbs (without HDD)
User’s Manual OR-7500FD Series
9
Chapter 2. System Installation
1. Package Contents
The following components are included in product box:
DVR Unit
DC Adaptor
Power Cord
Remote Controller
Quick Guide
CD
(User's Manual
& Network S/W)
User’s Manual OR-7500FD Series
10
2. Connecting Devices
Following picture shows the rear panel of DVR:
• Front USB : Two USB ports are available in front to connect external devices like HDD, Flash
memory for Backup, System upgrade or USB mouse.
Video Input
Connect HD-SDI CCTV camera with using ‘HD-SDI video in
1,2’ BNC video connectors. Use regular cable to minimize video
noise.
• LOCK (Green LED) : Turned on when SDI Camera and DVR
connected normally.
• ON ERR (Red LED) : Turned on when error detected in SDI Camera data receiving
* Live image would be ok even error detected on receiving data.
Audio Input
The DVR can record audio up to 2 sources. Connect the audio sources to the
Audio-In RCA connectors. All channels need external pre-amplifiers.
*Check your local law(regulation) before audio installation because whether it is
illegal use or not.
SPOT output(CVBS out)
This DVR provides 2 spot outputs with video and sound input.
• Composite output: This output provides 720x480 resolution and user can
define output type and screen ratio. For more details, see
Chapter 3-2. DVR
Configuration
.
• Audio output: Make sound outputs on each audio input. Delay setup is
available to compensate time difference when playback. For more details, see
Chapter 3-2. DVR Configuration
Audio output
Audio output uses line output level. Connect speaker with built in power amplifier or
power amplifier passed one.
User’s Manual OR-7500FD Series
11
HDMI, VGA Output
Connect HDMI monitor or VGA monitor. This DVR provides
same image output on HDMI and VGA monitor. Available
output resolutions are 1920 x 1080, 1280 x 1024, 1280 x
720, 1024 x 768. Factory default is 1280 x 720. To change
output, see following 3 steps.
1. Press and hold ‘Zoom’ button for 3seconds on remote controller or system front. This changes
resolutions as following order 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768.
2. Select display resolution on quick setup menu.
3. or Select display resolution on setup menu
HDMI port provides 32 kHz sampling frequency audio output.
RS485/Alarm/Sensor
This RS485 connector can be used to control PTZ cameras. The
DVR can also be controlled by keyboard controller.
2 alarm output ports are available in using external alarms such
as sirens or lights. Alarm output connector is TTL output signals.
2 sensor input and 1 emergency sensor input ports are
available in using external devices. You can use sensors to
inform event on DVR. The emergency sensor is designed for Emergency recording only. This
follows Emergency recording configuration once it is triggered.
RS-232C connector is provided to connect an ATM/ POS machine with Text-In feature.
To make connection on terminal block, press and hold the button and insert the wire in the hole
below button
Etc
• Network: Connect a LAN cable on RJ-45 port on DVR for remote monitoring via network,
playback and setup. See
Chapter 3-2. DVR Configuration
about network configuration
• Reset: : this will return all DVR settings to original factory default. To do reset, turn DVR off
first and turn it on again and press and hold reset button until system initialized. (use paper
clip or similar to press) .
• Power connection: Connect enclosed adapter on it. (DC12V, 3.33A) . (free voltage from
100V to 240V, 50/60Hz)
※ Adapter input range is: AC 100V ~240V, 50/60Hz
User’s Manual OR-7500FD Series
12
3. Cautions
• Avoid installing the product where there are direct rays or it is hot by locating near from heat
generator. (May cause fire)
• Do not put vase, flowerpot, cup, cosmetics, drug, and anything the contain water on product.
(May cause fire or electric shock, and it may injure people by falling)
• Do not insert or drop any metal object (coin, hair pin) or flammable object (match, paper) into
air hole. (May cause fire or electric shock)
• Do not put any heavy object on it. (May injure people by being fell or destroyed.)
• Put power plug surely not to be moved. (If not, this may cause fire.)
• Unplug power plug and antenna when there are thunders and lightening. (May cause fire.)
• For cleaning the product, wipe surface with dry towel. Using chemical agent or cleaner may
change the color and unpeel paint.
• Do not put several plugs at same time. (May cause electric shock.) If there is smoke or strange
smell, stop operation. In this case, turn the power off and unplug it, and then contact our
service center. (If you keep using it, this may cause fire or electric shock.)
• Do not unplug by pulling cord. (If cord is damaged, it may cause fire or electric shock.)
• Do not plug or unplug with wet hands. (May cause electric shock.)
• Keep the power cord untwisted. (May cause fire or electric shock.)
• Use proper adapter. (Using too much electric power may cause fire or electric shock.)
• Do not install it at where exposed to rain and wind and water drop. (May cause fire, electric
shock and transformation.)
• Keep away from fire. (May cause fire.)
• Do not disassemble or remodel on your own. (May cause malfunction or electric shock.)
• Do not put next to flammable materials like flammable spray. (May cause fire.)
• Do not install it at a place with too much dirt. (May cause fire.)
• Do not install it on unstable places like shaking table and inclined place or shaking place. (May
injure users by falling down or being upside down.)
• Do not put an heavy object on power cord or avoid it from being pressed by the device. (May
cause fire or electric shock.)
• In case of using extension cord, do not use several devices at same time. (May cause fire with
abnormal heating of extension.)
• When there are dirt on power plug pin or power outlet, clean it nicely. (May cause fire.)
• Do not damage on power cord or plug, and bend or twist or pull too much, and put it between
other objects or heat. If power outlet insertion part is not tight, do not use it. (May cause fire
or electric shock.)
• Do not drop or give a shock to the product. (May injure people or cause malfunction.)
• Do not touch power adaptor or signal controller. (May cause electric shock.)
• Do not put any object too close to block cooling fan. (May cause fire.)
• In case of exchanging batteries with improper type, there might be danger of explosion.
• For used batteries, throw away separately from other garbage.
• When you take out batteries, avoid children from eating them by mistake. Keep them away
from children. (If a child ate them, contact a doctor right away.)
User’s Manual OR-7500FD Series
13
Chapter 3. Using DVR
1. Basic Operation
1-1. Front Panel & IR Remote Controller
This DVR should be installed correctly before using. Button’s position and shape may varied by
DVR model. Commonly used main buttons positioned in front panel.
Control
Description
USB Port
Two USB ports
are located on
front panel.
Camera Buttons (1~0)
Press
‘
camera
’ button and
‘
Enter
’ button
make displays
selected camera to display full screen. Buttons are used to
enter passwords.
MENU / EXIT Button
Enters the Setup Menu. User will need to enter the authorized
password to assess Setup. In Playback mode, MENU button
displays the Playback Menu.
DISPLAY Button
Changes the screen display mode in the current screen o
r
playback screen.
SEQUENCE Button
Display
live channels sequentially.
Up, Down, Left, Right
Arrow, ENTER Buttons
C
hange settings for the product in MENU mode or used in PTZ
control mode. (pan, tilt)
BACKUP Button
Backup
recorded data to an external sto
rage device.
PLAYBACK Button
Switch
to playback mode from live mode.
PAUSE Button
P
ause
playback
image on playback mode.
- Display menu to save PTZ preset on PTZ mode.
PLAY Button
Play video forward. Press button repeatedly to increase play
speed up to max 32 times (1, 2, 4, 8, 16, 32 times) faster. Use
this button to move right when setting the menu.
- Focus on far distance in PTZ mode.
R.PLAY Button
Plays the video
back
ward. Press the button
again
to increase
playback speed up to max 32 times (1, 2, 4, 8, 16, 32 times)
faster. Use this button to move right when set the menu.
- Zoom out on PTZ mode.
STEP FORWARD Button
Move forward
frame
by
frame on
pause
d status
. Use this
button to move up when set menu.
- Focus on near distance in PTZ mode.
STEP BACKWARD Button
Move backward
frame
by frame on
pause status
. Use this
button to move down when setting the menu.
- Zoom In in PTZ mode.
EJECT Button
It will open or close the backup drive such as CD
-
RW or DVD
- Display menu to load PTZ presets in PTZ mode.
PTZ Button
Changes to PTZ control mode from live mode.
User’s Manual OR-7500FD Series
14
ZOOM Button
Zoom
current
camera
image on screen.
PIP Button
Change to PIP screen mode from live
screen.
FREEZE Button
Freeze current screen.
AUDIO Button
Select
channel
for live & playba
ck audio output.
OSD Button
Turn on/off OSD display.
LOG Button
Check
system log information.
ID Button
Select DVR system ID. (Remote controller only)
E.REC Button
Press E.REC button
to apply
Emergency Recording Mode
for
whole channels. It displays "!" on the screen. To stop E.REC
mode, press button again.
Status LED
Power, HDD, Network, Alarm
1-2. Turning on the System
Connect power and turn the power on DVR. It takes about 10~30 seconds in initializing system.
Once system is initialized, it displays live screen and start to record video automatically.
Note
: To turn off the system, select SHUTDOWN in main menu (MENU > SHUTDOWN) and
unplug power cord when shutdown message appears.
Note
: HDD should be formatted when it is installed first time.
“MENU > RECORD > Storage > HDD format”
1-3. Menu Bar
Menu bar will appear bottom of screen as follows.
Press Menu to open main menu list.
Show used space as % of HDD being used.
Turned on when the HDD is set as overwritten.
Sequence display mode.
Turned on when the system is connected to network.
Turned on when Alarm is on active.
E.REC (Emergency Recording) Mode.
Display date & time.
IR Remote Controller
User’s Manual OR-7500FD Series
15
1-4. Display Icons
No Recording
Recording (Red)
E.REC (Emergency Recording)
Event Recording (Red)
Pre Event Recording (Blue)
Motion Detection
Sensor Detection
Text In
PTZ Camera
Instant Backup
Clip Maker (Blue)
Backup (Red)
Video Loss
User’s Manual OR-7500FD Series
16
1-5. User or Admin Login
Press MENU to enter main menu. Login screen appears to enter ID and Password. Up to 8
numbers are required on password with combination of numbers from 0 to 9. Click numeric
buttons on the bottom to enter password. Click “…” button to pop up virtual keyboard when using
front buttons or remote controller to enter password.
The factory default password is ‘none’, press OK to log in system for the first time log in.
Password can be set in password setup option (MENU > SYSTEM > User). System will be
automatically log out if it is not in-use for a while. This "Auto Logout Time" can be set in
password set up option (MENU > SYSTEM > User).
User’s Manual OR-7500FD Series
17
1-6. The Main Menu
The Main Menu of DVR consists of SYSTEM, DEVICE, DISPLAY, RECORD, NETWORK and EVENT.
And each menu consists of various sub menus that allow detail set up of the system. Use Mouse,
Remote Controller or Front Buttons to access each menu.
Note
: Please make sure system log out when setup or operation is completed to prevent any
unauthorized changes of system setup or operations.
MAIN MENU
SYSTEM
Information
Date & Time
User
Quick Setup
System Log
DEVICE
Camera
Audio
Alarm
Keyboard
RS232 & RS485
DISPLAY
Display
Composite
RECORD
Storage
Record
Utilities
NETWORK
Address
DDNS
Notification
Transmission
EVENT
Sensor
Motion
Video Loss
Text-In
System
LOGOUT
SHUTDOWN
User’s Manual OR-7500FD Series
18
1-7. Contextual Menu
Additional Contextual Menu screen appears by pressing right button on the Mouse.
Camera : Select camera no.
OSD: select OSD display option
Freeze : Pause current image display
Display: Display option
Audio : Select Audio output
PTZ : Select PTZ options
Backup : Select backup options
Playback : Playback recorded data
E. Record : Start Emergency Recording
Log : Select System/Event log
Setup Menu: Enter Main setup menu
For more detail information on see 2. DVR Configuration.
User’s Manual OR-7500FD Series
19
2. DVR Configuration
2-1. SYSTEM
In SYSTEM menu, System configuration options for general Information, Date &Time, User,
Quick Setup and System Log can be selected.
2-1-1. MENU > SYSTEM > Information
In Information screen, DVR Name, MAC Address, Version, Upgrade, Mac Address, Remote
Controller ID and Configuration options can be selected. Select and press DVR Name or to
change DVR name. Use virtual keyboard to enter DVR name.
To upgrade system, place upgrade file on USB Flash Memory and put it on DVR. Once device is
recognized, press upgrade button to execute system upgrade.
Upgrade will take approximately 5 minutes. DVR will reboot automatically when the upgrade is
completed.
Note
: DO NOT remove USB Flash Memory or turn off the system during the upgrade. Removing
USB Flash Memory or Turning off the system during the upgrade may cause system
malfunctioning.
Remote Control ID
Enter Remote Control ID to control multiple DVRs individually. If Remote Control ID remains as 0,
no need to select Remote ID when using remote controller. It will work as general ID for any
remote controls and a remote control will communicate with any DVRs with ID 0.
Configuration
System settings can be saved and loaded using Configuration option
Export: Save settings to USB Flash Memory
Import: Load saved settings from USB Flash Memory
Default: Load factory default settings
Note
: Configuration Import does not affect or change system and network settings.
Net Network settings changed when select Default option.
User’s Manual OR-7500FD Series
20
2-1-2. MENU > SYSTEM > Date & Time
In the Date & Time, Time Zone, Date, Time,
NTP Server, Holiday options can be selected.
Highlight and press Time Zone to select
right Time Zone.
Select ‘Use Daylight Saving Time’ if it is
applicable. Enter start and end date/time for
local ‘Daylight Saving Time’.
Press button to set up Date and Time. Press Format button to select a date & time
display format.
Select ‘Use NTP’ to enter Time Servers to be
synchronized with DVR. Highlight and press
to enter Time Server using the virtual
keyboard. Press ‘Update’ to synchronize the
DVR time with the registered time server.
Note
: NTP is not essential for DVR operation.
Any type of Standard Time Server can be used
(e.g. time.windows.com). Time Synch might
not be completed due to heavy traffic or delays from the Time Synch server.
Press Holiday to set specific date as Holiday
setup. Set specific date by pressing button.
Change and delete dates using and
buttons.
Note
: Holiday may not same date every year.
User have to update every year.
User’s Manual OR-7500FD Series
21
2-1-3. MENU > SYSTEM > USER
User can define new user and permissions on this page
Add new user with press button. To delete, use button.
Auto Login: It allows user to log in right after system boots up automatically. As a system allows
auto log in without the authentication process please make sure DVR has a limited access by non
authorized personnel
Auto Logout: Set On or Off Auto Logout option.
User name : Enter user name
Group : Select a group which a new user will belong to
Password : set a new password or change a password.
Note
: No password defined on initial starts.
Register new group use button and set permission of group to each user. To delete, press
button.
User’s Manual OR-7500FD Series
22
2-1-4. MENU > SYSTEM > QUICK SETUP
Quick Setup Menu allows easy and basic setup for main menu settings.
2-1-5. MENU > SYSTEM > SYSTEM LOG
In the System Log, full list of system logs can
be searched.
Press Reload button to refresh log list. USE
button to search log list page by page.
Log list can be exported in text format.
User’s Manual OR-7500FD Series
23
2-2. DEVICE
Under Device menu, Device configuration options for Camera, Audio, Alarm, Keyboard and RS232
& RS485 (POS/PTZ/Keyboard) can be selected.
2-2-1. MENU > DEVICE > Camera
Set Camera display option. Camera display
(video loss display) can be disabled by
unmarking the box next to it if there is no
camera connected. Press to change title.
PTZ Control
Select channel connected with PTZ camera.
Select PTZ from the contextual menu appears
by pressing right mouse button.
Note
: PTZ can only be controlled in single
screen mode.
Use icons on screen to control PTZ. By using a mouse, click arrows to move around PTZ and click
icons for each functions of PTZ camera.
Zoom Out
Zoom In
Focus on near distance
Focus on far distance
Save Presets
Load Presets
User’s Manual OR-7500FD Series
24
Covert Setting
Covert setting allows the privacy on monitoring.
If Covert is set, live or playback image will not
be displayed. Covert can be scheduled by day,
time and mode by cameras.
Covert Low Mode: No display of video image
on screen but OSD still remains on screen.
Covert High Mode: Neither of video image or
OSD will be displayed on screen.
Note
: Any Covert options will not affect recording data as it is applied on monitoring conditions.
2-2-2. MENU > DEVICE > Audio
Select Audio for Audio recording. Each Camera
and Audio can be linked regardless of its
channel numbers.
2-2-3. MENU > DEVICE > Alarm
Alarm duration: Set Alarm activation time from 5 seconds to 10 minutes.
Select Schedule tap to schedule Alarm operation. Alarm can be set by day, time, mode and inputs
(camera).
Press to choose Alarms and set Buzzer
with Alarm activation.
User’s Manual OR-7500FD Series
25
2-2-4. MENU > DEVICE > Keyboard
Press to find and select keyboard from the
list.
2-2-5. MENU > DEVICE > RS232 & RS485
Press to select a device for each port.
RS232: Supports Text In (POS) device. PTZ
and Keyboard
RS485: Supports Text In (POS) device ,PTZ
and Keyboard.
Note
: Text In devices (e.g. Cash Register)
needs to use ASCII code for Text In info on
DVR
User’s Manual OR-7500FD Series
26
2-3. DISPLAY
Set display configuration and composite output on this menu.
2-3-1. MENU > DISPLAY > Display
Language: Select system language. Press
to find available language options.
Hide Status Bar: Select On/Off and time to
hide Status Bar when system is not in use.
Vertical OSD Margin: Set vertical OSD
margin on screen.
Horizontal OSD Margin: Set Horizontal OSD
margin on screen.
Sequence interval : Set switching time
interval on each camera changes in sequence
mode.
Event popup : Pops up the camera image in
full screen when pre-set event occurs.
Resolution : Set resolution of HDMI and VGA
output.
PIP: Stands for ‘Picture In picture’. Select size
and position of sub channel.
Loading...