Orionstar A10 User Manual

1

Orionstar Bluetooth Speaker

User Manual

Model A10 (Version 2.1)

Thank you for purchasing the Orionstar Bluetooth speaker. Please read this
manual carefully and keep it for future reference.

Features of the speaker:

1. New Bluetooth Technology supports wireless control through a Bluetooth device

2. Large Screen display of Time and date, Alarm, Temperature, Battery level and
Mode

3. Built-in FM radio with automatic channel searching

4. Plays MP3, WAV, WMA, APE, FLAC format audio files from a Micro SD card/TF
card and USB. Shuffle function when playing from a USB or Micro SD/TF card

5. 3.5mm line-in jack for wired devices

6. Built-in 5000mAh rechargeable battery

7. Two 52MM speaker drivers deliver 12W deep and rich sound

8. Built-in Microphone for phone Calls

9. Alarm setting for FM radio and Music from a USB/Micro SD card. Repeat alarm
and snooze function.

2

Operating Instructions:

1. Charging

Connect the Micro-USB connector of the charging cable to the DC5V input socket
at the rear side of the speaker, and plug the USB connector of the charging cable
to an external USB power supply socket with a minimum supply current of 1A
(recommended charge current is 2A). The external USB power supply can be the
USB socket in your computer/laptop, the USB adaptor of most cell phone USB
chargers with DC5V output, or the 5V USB port of a power socket etc. When
charging, the charge indicator on the charge port will be on and it will turn off when
charging is complete.

2. On/Off

Slide the On/Off switch at the rear side to turn on/off the speaker. The speaker will
enter Time Mode after turning on.

3. Bluetooth

Press the “ ” button to enter Bluetooth mode, press the “ ” button again
will exit to Time mode.

Paring – When the speaker is in Bluetooth mode, turn on your Bluetooth device
and search for Bluetooth equipment “A10”, and then pair up with the speaker.

Bluetooth phone call - When paired to your phone, press the “ ” button to
answer incoming calls, press “ ” again to end the call. Hold the “ ” button to
reject the call. Pressing the “ ” button twice will call the last incoming call

number.
Note: Microphone is on top of the speaker, please talk into the microphone
when making phone calls.

Track selection – When playing music in Bluetooth mode, press the

”button to jump to the previous track or next track. Track selection can also

be done from your Bluetooth device.

3

4. FM radio

Press the “ ” button to enter FM mode. Press the “ ” button again will exit
to Time mode.

FM Channel Search – When in FM mode, press and hold the “ ” button to
start automatic channel searching. The speaker will save the channels it finds
and automatically assign channel number.

Channel Selection – After channels have been saved, press the / button
to move to the next or previous channel.

Delete Channel – Press and hold the “ ” button while the radio is playing the
channel you want to delete.

5. USB / Micro SD Card

The speaker supports a USB/Micro SD card. Just plug your USB Flash Drive or
Micro SD Card into the speaker’s USB port or Card slot and the speaker will play
the music files automatically.

Note: USB/Micro SD card is not supported when in FM mode. If the speaker is in
FM mode, press the “ ” or “ ” button to exit FM mode and insert the

USB/Micro SD card.
Shuffle – When playing music from a USB/Micro SD card, press and hold the

button to switch between shuffle and sequence playing. “-R-” on the screen

means Random play.

6. Setting the Time & Date

Press and hold the “ ” button and the month number will start flashing, press “+”
or “-“to adjust the month. Press “ ” again to confirm the month setting, and the
date number will start flashing. Press “+” or “-“ to adjust the date, press “ ”

again to set, and then follow the same process to adjust the hour and minute.