ORION ELECTRIC M2C3A User Manual

DVD/CD PLAYER

DRAFT

Hi-Fi STEREO

VIDEO CASSETTE

RECORDER

USER'S GUIDE

For model:

HR-XVC20U

For Customer Use:

Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference.

Model No. Serial No.

LPT0674-001B

2C30101AE Cover 10/31/02, 20:301

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

CAUTION: Changes or modifications not expressly approved by the partly responsible for compliance with

the FCC Rules could void the user's authority to operate this equipment.

CAUTION:

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER'S GUIDE CAREFULLY AND

RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT A JVC AUTHORIZED SERVICE CENTER.

USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES O THER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE T O LASER BEAM, DO NO T TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.

Location of the required Marking

The rating sheet and the safety caution are on the rear of the unit.

CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.

CAUTION:

Changes or modifications not approved by JVC could void user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

2C30101AE(02-05) 10/31/02, 20:302

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning the exterior cabinet only.

6. ATTACHMENTS

The manufacturer of this unit does not make an y recommendations for attachments, as they may cause hazards.

7. WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

8. ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious damage to the unit. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

9. VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation, to ensure reliable operation of the unit, and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and/or the manufacturer’s instructions have been adhered to.

10. POWER SOURCES

This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.

11. GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug, if your unit is equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the groundingtype plug.

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

PORTABLE CART WARNING

(symbol provided by RETAC)

S3125A

2C30101AE(02-05) 10/31/02, 20:303

IMPORTANT SAFEGUARDS

13. LIGHTNING

To protect your unit from a lightning stor m, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQ UID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17. OUTDOOR ANTENNA GR OUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

18. SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. DAMAGE REQUIRING SERVICE

Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the

unit to its normal operation. e. If the unit has been dropped or the cabinet has been damaged. f . When the unit exhibits a distinct change in performance, this indicates a need for service.

20. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

21. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

22. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

23. DISC TRAY

Keep your fingers away from the disc tray as it is closing. It may cause serious personal injury.

24. CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.

2C30101AE(02-05) 10/31/02, 20:304

IMPORTANT SAFEGUARDS / Power source

25. LASER BEAM

Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage.

26. DISC

Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction.

27. NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

ANTENNA LEAD IN WIRE

GROUND CLAMP

ELECTRIC SERVICE

EQUIPMENT

NEC-NATIONAL ELECTRICAL CODE S2898A

CONDENSATION

Moisture will form in the operating section of the DVD/VCR if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. And when this happens, DVD/VCR's performance will be impaired. To prevent this, let the DVD/VCR stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the DVD/VCR is exposed to the breeze from an air conditioner. In such cases, change the location of the DVD/VCR.

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING

ELECTRODE SYSTEM (NEC ART 250, PART H)

Power source

AC Outlet

Wider Hole and Blade

Polarized AC Cord Plug (One blade is wider than the other.)

TO USE AC POWER SOURCE

Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet.

NOTES:

Never connect the AC line cord plug to other than the specified

• voltage (120V 60Hz). Use the attached power cord only. If the polarized AC cord does not fit into a non-polarized AC

• outlet, do not attempt to file or cut the blade. It is the user’s responsibility to have an electrician replace the obsolete outlet. If you cause a static discharge when touching the unit and the

• unit fails to function, simply unplug the unit from the AC outlet and plug it back in. The unit should return to normal operation.

2C30101AE(02-05) 10/31/02, 20:305

Features

DVD/CD Player/Video Cassette Recorder

• DVD/CD player with Video Cassette Recorder - Unique space saving design combines a D VD/CD pla y er and a Hi-Fi Video cassette recorder. The DVD disc has m uch more capacity, but is the same size as the audio CD disc. Picture quality is higher than Super VHS. Audio quality is higher than audio CD. The DVD PLAYER can play back video CDs and audio CDs.

• High Quality Picture - More than 500 lines (VCR mode: 230 lines) of Horizontal Resolution. It exceeds Super VHS (400 lines) or Laser Disc (430 lines) in resolution.

VCR Section

• Stereo/SAP Reception - This VCR is designed to receive stereo and separate audio program (SAP) broadcasts where available.

• SQPB - Tapes recorded in the S-VHS system can be played back simply on this VCR.

• 4 Video Heads - Provides optimal picture quality for special effects playback.

µm HEAD - For superior picture quality even in EP mode, 19micron width technology helps to avoid crosstalk and

• 19 boost EP picture quality to near SP levels. With precision technology, ghosts and color beats are virtually eliminated.

• Hi-Fi Stereo Sound - With a frequency response of 20 to 20,000 Hz and a dynamic range of better than 90dB, this VCR provides a level of excellence that rivals compact discs.

• Instant Timer Recording (ITR) - Simply by pressing the REC and PLAY buttons, the VCR can be programmed for up to 5 hours of recording with an immediate start.

• Skip Search - When the SKIP SEARCH button is pressed during playback, the VCR will automatically search forward in 30 seconds increments to a maximum of 3 minutes with each press of the SKIP SEARCH button, and then return to normal playback.

DVD Section

• Compatible with a wide range of DVD audio outputs Digital Audio Jack (Optical or Coaxial):

• When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the effect of being in a movie theater or a concert hall.

• Surround standard different from Dolby Digital. This format is already in use in many theaters. By connecting this unit to a DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs recorded in this format can be enjoyed. However, audio will not be output from the analog audio output jacks.

• The MPEG audio of DVD discs recorded in this format can be enjoyed.

• The Linear PCM sound of a 48 kHz/16 bit through 96 kHz/20 bit exceeds audio CD sound.

• Surround audio - This DVD equipped with a “SPATIALIZER N-2-2”. It can produce the effect of being in a cinema or a concert hall.

• Multi-Language - Since this DVD matches with 124 language-subtitles/-soundtracks, you can enjoy selecting a favorite one. (You can not select the language that is not recorded on the disc.)

• Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc, you can change the angles during playback. (If a Multi-Angle is not recorded on the disc, you can not change the angle.)

• Repeat Playback - You can repeat chapter, track, title, sides or material between two selected points.

• Program/Random Playback (CD) - You can play back tracks in programmed or random-selected sequences.

• Zoom - You can zoom in on the selected subject on the screen during playback.

• Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor/television on a suitable disc.

• Parental Control - You can limit the playback of scenes or sounds of adult DVD discs which have a parental level rating.

• MP3/WMA/JPEG file Compatibility - This DVD can play back MP3/WMA/JPEG file recorded on the CD-R/RW and FUJICOLOR CD and Kodak Picture CD formats.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents

and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation or other rights owners and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation or other rights owners. Reverse engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby

* *

Certain audio features of this product manufactured under license from Desper Products,Inc. Spatializer and the circle

- in - square device are trademarks owned by Desper Products,Inc.

Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws.

2C30101AE(06-11) 10/31/02, 20:306

Contents

Before using your unit

IMPORTANT SAFEGUARDS ..........................3

Power source ...................................................5

Features ...........................................................6

Contents...........................................................7

Parts and functions ..........................................8

Display .............................................................9

Remote control...............................................10

TV multi-brand remote control........................12

Control four JVC VCRs ..................................13

Basic connections ..........................................14

CATV (CABLE TV) connections.....................16

Playback connections ....................................18

Setting up the VCR section

Setting the video channel............................... 20

Setting the language ...................................... 20

Tuner setting .................................................. 21

To ADD/DELETE channels............................. 22

Noise elimination............................................ 22

Auto clock setting ........................................... 23

Manual clock setting....................................... 25

Loading and Unloading a cassette tape......... 26

Tape playback operation

Cassette tape playback.................................. 27

Special playback ............................................ 28

ZERO RETURN function................................ 29

Video Index Search system ........................... 29

Recording

Recording a TV program................................ 30

Instant Timer Recording (ITR)........................ 32

Timer recording .............................................. 33

Advanced function of VCR section

Stereo recording and playback ...................... 35

Separate Audio Program (SAP) ..................... 35

Duplicating a video tape................................. 36

Duplicating a disc material onto a video tape ....

Disc Playback operation

Disc ................................................................ 37

Setting setup language .................................. 38

Playback procedure ....................................... 39

Special playback ............................................ 40

Zooming ......................................................... 41

Locating Desired Scene ................................. 41

Repeat playback ............................................ 42

Program playback (CD).................................. 43

Random playback (CD).................................. 43

MP3/WMA/JPEG Playback ............................ 44

Setting the JPEG size .................................... 46

Changing Angles (JPEG CD)......................... 46

Setting the Slide show.................................... 47

Zooming (JPEG CD) ...................................... 47

Setting the List file.......................................... 48

Marking Desired Scenes ................................ 49

Changing soundtrack language ..................... 50

Subtitles ......................................................... 50

Changing angles ............................................ 51

Title selection ................................................. 51

DVD menu...................................................... 51

Advanced Function of DVD section

Parental control .............................................. 52

Temporary disabling of rating level by DVD

disc................................................................. 53

Setting menu language .................................. 54

Setting subtitle language................................ 55

Setting audio soundtrack language................ 56

Setting surround sound .................................. 56

Setting the aspect ratio of TV screen ............. 57

Setting on Screen display .............................. 58

Status display of Disc..................................... 58

Dynamic Range Control ................................. 59

Language Code List ....................................... 60

Additional information

Problems and troubleshooting ....................... 61

Video head cleaning....................................... 62

Specifications ................................................. 63

HOW TO LOCATE YOUR JVC SERVICE

CENTER ........................................................ 64

LIMITED WARRANTY.................................... 65

2C30101AE(06-11) 10/31/02, 20:387

Parts and functions

Front

VCR/DVD mode selector button

Cassette Loading Slot

POWER

button

AUDIO (L/R)/

VIDEO IN jacks

VCR indicator

OPEN/CLOSE button

EJECT button

Remote sensor

CHANNEL +/– buttons

STOP button

PLAY button

REW (Rewind) button

Disc tray

DVD indicator

REC button

FF (Fast Forward) button

Rear

AC power cord

DVD COMPONENT OUT jacks

S-VIDEO/COMPONENT Video

DVD OPTICAL DIGITAL AUDIO OUT jack

DVD COAXIAL DIGITAL AUDIO OUT jack

selector switch

DVD S-VIDEO OUT jack

RF IN jack

RF OUT jack

DVD/VCR common AUDIO (L/R)/VIDEO OUT jacks

DVD AUDIO (L/R) OUT jacks

2C30101AE(06-11) 10/31/02, 20:308

Display

Display window

No. Display Description

VCR 2 3

DVD 5

CD 6

10 : 00

01 : 00

1 2

VCR mode Playback (lights) / Auto resume (flashes) Still picture DVD disc is inserted. CD is inserted. Display for afternoon (lights out in the morning) Clock display (colon[ : ] flashes) Counter display by hour/minute at VCR/DVD / by minute/second at CD Track number display for CD

5 6

TV channel display for VCR CATV channel display

Error display External input display

Playback Control (Video CD) Timer recording display Video tape is in the unit

Track display for CD Normal recording display (flashes during Instant Timer Recording - ITR)

10 11

CH02 7

C036

Err

Pbc 8 9

TRK

REC

Explanation for On-Screen-Symbol (DVD):

Playback Stop Still picture Frame advanced playback Forward slowmotion Fast Forward playback Review playback Skip chapter to forward direction

Note:

Some discs may be displayed wrong or e.g. chapter number, playback time, etc. may not be displayed.

Skip chapter to reverse direction Open or Close the tray Auto resume Direction button’s mark

A B

A-B repeat

Off

Repeat off Subtitle language Soundtrack language Angle

Zoom Parental level locked Parental level unlocked Screen size: Normal TV Screen size: PAN SCAN Screen size: WIDE Shows prohibited act Output sound for Video-CD

2C30101AE(06-11) 10/31/02, 20:309

Remote control

TV Multi-Brand Remote Control

This Remote can control some functions (TV POWER, NUMBER(0-9), INPUT, TV VOL +/–, TV CH +/– and ENTER)

TV of JVC and the brands listed on page 12 by slide TV/VCR/DVD switch to TV. (The POWER button on the upper right is not effective for the TV.)

NOTES:

It’s not possible to operate a unit not

•

equipped with a remote sensor. When you operate the VCR or DVD, the

•

TV/VCR/DVD switch must be slided to

VCR/DVD again. Otherwise the DVD/ VCR may not operate properly. Since this unit is combined type of DVD

•

and VCR, the remote code of DVD is individual. So please note that the DVDkeys on the RCU of the other JVC RECEIVER/TV is not effective for this unit.

of a remote controllable

Page

TV/VCR/DVD switch POWER Power on/off 20 DVD MENU Display menu of DVD software 51 MARKER Locating desired scene 49 RETURN Remove DVD set up menu 38,53 OPEN/CLOSE Open or Close the tray 39 DISPLAY Change the front Display mode 29 SUBTITLE Set Subtitle of a DVD disc 50 A.TRK Digital AUTO TRACKING 28 ANGLE Change playback angle of a DVD disc 46,51 C. RESET Reset the counter to 00:00 29 SEARCH MODE Index for DVD 41 ZERO RETURN PLAY MODE Select playback mode 42,43 SP/EP Sets the tape speed for recording 30,32 ZOOM Zoom (DVD/VCD) 41,47 TITLE Select title of a DVD disc 51 REPEAT A-B 0-9 Direct channel selection of TV 22,30

TIMER TV/VCR Switches between TV and VCR 20,31 TV POWER Turn the connected TV on or off 10 INPUT Switch the connected TV to external mode 10 TV VOL +/– Adjust the connected TV’s volume 10 REW Rewind/Review playback 27,28,40 PLAY Playback 27,39 FF REC Recording 30,32,36 STOP Stop 27,39 PAUSE Still picture/Recording pause on/off 28,31,36,40 SKIP / INDEX / Search for the INDEX mark of a tape 29 TV/VCR CH +/– Select channel of the connected TV or VCR

/ Cursor buttons SET –/+ Setting buttons 33,34

/ Cursor buttons - To move Up in the VCR menu

ENTER Enter information in the menu SELECT Select option in the menu SET UP MENU Display menu of setup 20,21,38,46-48,54-58 CANCEL Delete Timer program 34

OSD Display VCR or DVD operation status 31,58 A.MONITOR

SLOW Slowmotion playback 28,40 SKIP SEARCH Skip the unwanted short material of a tape 28

Switch to operate TV or VCR or DVD 20,38

Stop the tape when the counter reaches 00:00

Repeat playback between A and B (DVD/CD)

Input setting 41,43 Enter a password 52,53 Set the unit to start recording at a preset time.33,34

Fast Forward/Forward search playback

Skip chapter to forward or reverse direction

10,30,32,36

Manual tracking buttons in playback mode 28 you press the

menu you press the

Cancel input data in the setting mode 25,33,41,43

Switches sound between mono and stereo Change sound track language of DVD

. To move Down in the VCR

27,28,40

40,45

35 50

2C30101AE(06-11) 10/31/02, 20:3010

Inserting Batteries

Remote control

Open the battery compart-

ment cover in the direction of the arrow.

Install two "AA" batteries (supplied),

2 3

paying attention to the polarity diagram in thebattery compartment.

Replace the compartment cover.

Battery precautions

The precautions below should be followed when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.

Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

Remote control basics

• Press POWER to turn the DVD/VCR on or off.

• Make sure TV/VCR/DVD switch is set to VCR/DVD.

• Tap VCR CH + or VCR CH – to move through the channels one channel at a time.

• The VCR CH +/– and SET +/– are also used to navigate on-screen menu system.

• You can directly access specific channels using Number keys pad.

• Each press of VCR or DVD, switches the screen between the VCR screen (VCR mode) and the DVD screen (DVD mode).

Operation

• Aim the remote control at the remote sensor and press control buttons

to operate.

• Operate the remote control within 30° angle on either side of the remote

sensor, up to a distance of Approx. 5 meters.

Approx. 5 meters

2C30101AE(06-11) 10/31/02, 20:3011

+ 23 hidden pages

ORION ELECTRIC M2C3A User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual