Orion Car Audio 8002 User Manual

CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

What's In The Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Practice Safe Sound™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Record Your Serial Number and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

End Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Stereo / Mono Input Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Input Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Remote Gain Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Auxiliary Output Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Internal Crossover Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Low-Pass Crossover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

High-Pass Crossover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Fine Tuning the Crossovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Adjusting INTELLi Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Infinite Baffle Example High-Pass Set at 30Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Sealed Example High-Pass Set at 20Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Sealed Example High-Pass Set at 30Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Vented Example High-Pass Set at 30Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Amplifier Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Speaker Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Amplifier Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Choosing Mounting Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Passenger Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Trunk Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

General Precautions and Installation Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Tools of the Trade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Step By Step Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Set Up and Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Testing the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Adjusting the Sound of the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

INTRODUCTION

Thank you for your purchase of Orion's 8002 power amplifier. Each Orion amplifier is designed to be the leader in its class offering the most power, advanced features, and extreme ease of use. In high-end sound systems or high SPL systems, Orion amplifiers will give you years of trouble-free performance.

● 8002 - 200 Watt per channel two-channel high current amplifier with built-in fully

variable high-pass, low-pass, or band-pass crossover with INTELLLi Q. Equipped with remote gain capability, the 8002 is capable of three, two, or one channel operation with a maximum power capability of 800 Watts into 4W mono.

The installation of all Orion components will determine the overall performance result. Improper installation will not only limit the performance of your Orion system but also potentially compromise the reliability of this amplifier. To ensure proper sonic results and component reliability, please refer to your authorized Orion dealer for installation assistance or advice. If you decide to perform the installation yourself, be sure to read the entire manual before beginning the installation.

What's In The Box

● (1) Amplifier

● (1) Extra fuse

● (1) Allen wrench 2.5mm

● (1) Allen wrench 3mm

● (4) #8 self-tapping black Phillips head pan head screws

● (1) Amplifier installation and operation manual

PRACTICE SAFE SOUND™

Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High power automotive sound systems can generate sound pressure levels in excess of 130dB. When playing your system at high levels, please use hearing protection and avoid long term exposure.

WARRANTY

Directed Electronics, Inc. promises to the original purchaser, to replace this product should it prove to be defective in workmanship or material under normal use, for a period of two years from the date of purchase by the dealer as indicated by the date code marking of the product PROVIDED the product was installed by an authorized Directed dealer. During this two year period, there will be no charge for this replacement PROVIDED the unit is returned to Directed, shipping pre-paid. If the unit was installed by anyone other than an authorized Directed dealer, the warranty period will be 1 year from date of purchase by the dealer as indicated by the date code marking of the product. During this 1 year period, there will be no charge for this replacement PROVIDED the unit is returned to Directed, shipping pre-paid. This warranty is non-transferable and does not apply to any unit that has been modified or used in a manner contrary to its intended purpose, and does not cover damage to the unit caused by installation or removal of the unit. This warranty is void if the product has been damaged by accident or unreasonable use, neglect, improper service or other causes not arising out of defects in materials or construction. ALL WARRANTIES

INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY ARE EXPRESSLY EXCLUDED TO THE MAXIMUM EXTENT ALLOWED BY LAW, AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO ASSUME FOR IT ANY LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT. DIRECTED HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS.

Unit must be returned to Directed, postage pre-paid, with: consumer's name, telephone number, and address, authorized dealer's name and address, and product description. IN

ORDER FOR THIS WARRANTY TO BE VALID, YOUR UNIT MUST BE SHIPPED WITH PROOF OF INSTALLATION BY AN AUTHORIZED DIRECTED DEALER. ALL UNITS RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF DIRECTED DEALER INSTALLATION WILL BE COVERED BY THE LIMITED 1 YEAR PARTS AND LABOR WARRANTY. BY PURCHASING THIS PRODUCT, THE CONSUMER AGREES AND CONSENTS THAT ALL DISPUTES BETWEEN THE CONSUMER AND DIRECTED SHALL BE RESOLVED IN ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALIFORNIA.

NOTE: This warranty does not cover labor costs for the removal and reinstallation of the

unit.

Record Your Serial Number and Date

Model: __________________________________________________

Serial Number: __________________________________________________

Date of Purchase: __________________________________________________

Purchased from: __________________________________________________

SPECIFICATIONS

1. Continuous 4W load 20Hz to 200Hz, < 0.05% THD, with input voltage at 13.8VDC.

2. Continuous 2W load 20Hz to 200Hz, < 0.1% THD, with input voltage at 13.8VD.

Amplifier Section

Power Output 4W Stereo (Watts)1 200 x 2

Power Output 2W Stereo (Watts)2 400 x 2

Power Output 4W Mono (Watts) 800 x 1

Remote Gain Yes

Distortion at Rated Power < 0.1% THD+N

Frequency Response 20Hz to 20kHz ±0.25dB

Linear Bandwidth 10Hz to 50kHz ±3dB

Signal-to-Noise Ratio at Rated Power > 100dB

Damping Factor > 200

Input Sensitivity 200mV to 5V

Input Impedance 40kW

Fuse Type 80 Amp MAXI

Dimensions 23.4" x 10.5" x 2.3"

Weight 10 lbs.

Crossover Section

Low Pass Crossover Continuously Variable

2nd Order / 4th Order

Low Pass Frequency Range 20Hz to 3kHz

High Pass Filter Continuously Variable

2nd Order

High Pass Frequency 10Hz to 3kHz

INTELLi Q 10dB boost

END PANEL LAYOUT

1. Power LED - when lit indicates that the amplifier is on.

2. Stereo/Mono Switch - configures the amplifier for one or two inputs.

3. Gain Control - continuously adjusts from 200mV to 5V for full power output.

4. Copy/Gain/Master Switch - determines the output of the RCA outputs.

5. RCA Inputs - accepts RCA input from a source unit, preamplifier, or equalizer.

6. RCA Outputs - provides easy connection to additional amplifiers.

7. Low-Pass Crossover Switch - activates 2nd or 4th order low-pass crossover.

8. Low-Pass Frequency Control - adjusts the frequency of the low-pass crossover.

9. High-Pass Crossover Switch - activates 2nd order high-pass crossover.

10. High-Pass Frequency Control - adjusts the frequency of the high-pass crossover.

11. INTELLi Q Control - continuously adjusts the "Q" boost of the high-pass crossover from 0 to 10dB of boost.

12. Speaker Connections - allow up to 12-gauge speaker wire.

13. Remote Gain Connector - allows the gain of the amplifier to be controlled remotely.

14. 1 MAXI Fuse - protects the amplifier from over current situations.

15. REM Remote Turn-on Input - turns on the amplifier when fed 12 V+.

16. Power Connections - allow up to four-gauge power and ground cables.

Stereo / Mono Input Configuration

The STEREO / MONO switch allows the Orion 8002 amplifier to use a single RCA or highlevel input to feed signal to both the right and left channels of the amplifier. When the switch is to the right (MONO position), signal from the left input is routed to the right channel. When the switch is to the left (STEREO position), right and left inputs are independent. This allows a source unit with an internal balance to change the stereo imaging.

Input Gain

The Orion 8002 amplifier has separate front and rear level gain adjustments. The input sensitivity of these adjustments range from 200mV up to 5V. This allows easy integration from any source unit. Refer to the Testing the System and the Adjusting the Sound of the System sections for detailed instructions on setting up the level controls.

Remote Gain Operation

The remote gain port provides easy remote access to the internal gain structure of the HCCA power amplifier. The RGC-1 plugs into the amplifier via the 1/8" mini jack plug. It can be installed in the front of the vehicle to control the amplifier gain level, and can be used as a bass level control when used on an amplifier dedicated to subwoofers.

In addition, one RGC-1 can be used on multiple amplifiers. Plug the RGC-1 into the first amp. The first amp must have its RCA output selection switch in the MASTER or GAIN position. The RGC-1 information will now be sent to subsequent amps via the MASTER signal.

Auxiliary Output Configurations

The auxiliary outputs on Orion amplifiers offer easy, unlimited system expansion. Routing signal from a source unit, pre-amplifier, or equalizer is a matter of connecting RCA's to the RCA Inputs and the RCA outputs to the next Orion amplifier in the signal chain. When the switch is in the COPY position, the RCA output is an identical copy of the input signal. The signal passes through a buffer stage so that several amplifiers can be daisy chained without signal loss or overloading of the source unit. This maximizes the signal output and minimizes the potential for system noise.

When the switch is in the GAIN position, the RCA outputs are buffered through the gain stage of the amplifier. When the first amplifier in the signal chain is set this way, a remote gain controller (RGC-1) can be connected to the amplifier and act as a PRE-AMP controlling the overall level of the system. Following amplifiers are configured in the COPY mode with their gains set to zero as the GAIN amp is now controlling the gain level for all subsequent amps. This eliminates the need to gain match multiple amplifiers.

When the switch is in the MASTER position, the RCA outputs are buffered through the gain stage of the amplifier and filtered through the crossover sections of the amplifier. When set this way, the amplifier's gain and crossover settings are sent to other amplifiers down the signal chain. This can be useful for configuring multiple subwoofer amplifiers easily in a large SPL system. All subsequent amplifiers after the master amp will be in the COPY position and have their gains set to zero and all crossovers turned off. The master amplifier will control all the functions of the slave amps via the MASTER RCA output signal.

+ 15 hidden pages