Orion XTRPRO122D, XTRPRO104D, XTRPRO102D, XTRPRO124D, XTRPRO154D Owner's Manual
...
OWNER'S MANUAL
MODEL
XTRPRO102D
XTRPRO104D
XTRPRO122D
XTRPRO124D
XTRPRO152D
XTRPRO154D
Subwoofer
1
TABLE OF CONTENTS
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
PracticeSafeSound™ ................................................
1
What'sinthebox.. .................................................
.2
Tools of the Trade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
Installation .........................................................
2
Finding Speaker Mounting Locations . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . .
2
Features ..........................................................
3
Wiring Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Specifications ......................................................
14
EnclosureRecommendations...........................................
18
Warranty ................................ .................. Backcover
INTRODUCTION
Thank you for your purchase of the Orion XTRPRO Subwoofers. These woofers
represent a combination of incredible performance and value.
PRACTICE SAFE SOUND™
Continuous exposure to sound pressure levels over 100dB may cause permanent
hearing loss. High powered automotive sound systems can generate sound pressure
levels in excess of 130dB. When playing your system at high levels, please use hearing
protection and prevent long term exposure.
Model Number:
Serial Number:
Date of Purchase:
2
WHAT’S IN THE BOX
Included in this box are all the necessary mounting hardware and cables for your basic
installation. Listed below is a detailed list of the components included in this system
package.
Quantity Description
1
Owner's Manual
1
Orion XTRPRO woofer
1
Mounting template
1
Trim ring with hardware..
TOOLS OF THE TRADE
Listed are the majority of the tools required to perform the installation. Having the
proper tools will make the installation much easier. It is very difficult when you get
half way through the installation and discover that you require a specific tool to
get yourself through a particular part of the installation. Some of these tools are
necessities. Some make the job much easier.
Marking Pen Electric Drill and assorted Bits
Phillips Screwdriver Wire Strippers
Allen Wrenches Volt/Ohm Meter (Optional)
Table Saw Jig Saw
Wire Cutters Wire Crimpers
INSTALLATION
The performance of these XTRPRO subwoofers is directly proportional to the quality
of the installation. Care taken with the installation process will be rewarded by years
of satisfying performance. If you are unsure of your installation abilities, please
refer to your local authorized ORION dealer for assistance. Orion dealers are trained
professionals dedicated to extracting the maximum performance out of your Orion
system. If you decide to install this speaker system yourself, please read the entire
section on sealed and vented enclosures before starting the installation.
FINDING SPEAKER MOUNTING LOCATIONS
Choosing the correct speaker locations will have the greatest effect on the sound
quality of the system. Different considerations are needed when choosing the
locations that best suit your needs. The locations must be large enough for the
speakers to fit. Care is needed to ensure that the location you have chosen will not
affect any of the mechanical or electrical operations of the vehicle.
Determining the best location for the speakers will depend on your cosmetic needs
and your vehicle’s interior. Usually the woofers are installed in the trunk, rear seat, or
rear of the vehicle..
3
FEATURES
Figure
1
Figura
1
Abbildung
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 Polypropylene dust cap - moisture and UV resistant.
2 Oversized Santoprene surround for linear controlled long excursion.
3 Vented paper cone - moisture and UV resistant.
4 Custom stamped aluminum frame.
5 Spider ring attachment screws.Part of re-cone feature (8 hex screws)
6 Vented Kapton voice coil former (10” uses 2.5" voice coil former, 12” & 15" use a 3"
voice coil former).
7 20mm H type steel front plate
8 Large 2 stack ceramic magnets (15” use large 3 stack ceramic magnets).
9 12mm steel back plate/pole piece T yoke assembly.
10 1.2"(10” speaker) & 1.4”(12” & 15" speaker) vent. Part of the enhanced voice coil
cooling system (forced convection).
11 PVC magnet protector.
12 High temperature Aluminum voice coil wound.Dual 2 and 4 ohm voice coils
available.
13 Dual Interlaced Conex spider with stitched and looped tinsel leads attached.
14 Custom allen head screw terminals.A pair on each side(one pair for each voice coil).
15 Spider space and spider mounting ring assembly part of field re-cone kit attachment
method.(eight allen head screws).
16 Surround clamp ring,part of fiele re-cone kit attachment method.(10” & 12” use
eight allen head screws, 15” use twelve allen head screws).
2 ohm
2 ohm
++
+
__
_
2 ohm
2 ohm
++
+
_
_
_
4 ohm
4 ohm
++
+
_
_
_
4 ohm
4 ohm
+
+
--
4 ohm
4 ohm
+
+
--
+
-
Figure 5
Figura 5
Abbildung 5
2 ohm
2 ohm
+
+
--
2 ohm
2 ohm
+
+
--
+
-
Figure 6
Figura 6
Abbildung 6
Loading...