Orion ORFOG1000, ORFOG1500 User Manual

User Manual

ORION Fog Machine [ORFOG1000]
Introduction

The ORFOG1000 Fog Machine is a high-powered portable fogger suitable for dances, concerts,
nightclubs, and parties. It can be easily controlled with the included wired Remote Controller, or with
the optional wireless Remote Controller and Rem ote Timer.

Specifications

 Volt a g e: 120V/60Hz, 230V/50Hz
 Fuse: 125V/10A, 250V/5A
 Power: 1000W
 Warm-up time: 5 minutes
 Fog output: 15,000 cubic feet/minute
 Spray distance: 5 metres
 Tank capacity: 1.5 liters
 Size: L415mm x W217mm x H145mm
 Weight: 8 kg

Controllers

Included: ON/OFF Remote Controller with 10-meter cable

Optional:

• Wireless ON/OFF Remote Controller – two-band transmitter with a 30 metre range.

• Remote Timer with 10-metre cable (manual or continuous output)

Warnings

Please follow these operation, safety and maintenance instructions to ensure a long and safe life for
your fog machine.

Electric shock danger

 Keep this device dry.
 For indoors only. Not designed for outdoor use.
 Use a grounded electric outlet with the correct voltag e supply.
 Always unplug the fog machine before filling the tank.
 Locate on a flat, even surface.
 Turn off or unplug when not in use.
 This fixture is not waterproof. If water or fog liquid gets inside the housing, unplug the unit and

consult a service technician.

 The fog machine has no serviceable parts inside. Always consult a qualified technician for

service and repair.

1

Burn warning

 For adult use only – install the fog machine out of the reach of children. Never leave the unit

operating unattended.

 Never aim the output nozzle directly at people.
 The fog output is very hot. Avoid coming within 50 cm. o f the outp ut nozzl e during operation.
 Locate the fog machine in a well-ventilated area. Never cover the unit’s vents. In order to

guarantee adequate ventilation, allow free air space of at least 20 cm. around the sides and top
of the unit.

 Never aim the output nozzle at an open flame.
 The output nozzle gets very hot during operation (300 degrees C). Keep flammable materials at

least 1 metre away from the nozzle.

 Always allow your fog machine to cool down before attempting to clean or service it.

Danger of explosion

 Never add flammable liquids of any kind (oil, gas, perfume) to the fog liquid. Pay attention to all

warning labels and instructions printed on the exterior of your fog machine.

 Use only the high-quality, water-based fog liquid that your dealer recommends. Other fog liquids

may cause clogging or spitting.

 Always make sure there is sufficient liquid in the fog liquid tank. Operating this unit without liquid

will cause damage to the pump as well as over-heating.

 In case of malfunction, discontinue use immediately. Drain all fog liquid from the tank, pack the

unit securely (preferably in the original packing material), and return it to your dealer for service.

 Always drain the tank before shipping or transportation.
 Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in contact with

skin or eyes rinse thoroughly with water.

Unpacking and Setup

Open the shipping carton and veri fy that all equipment necessa ry to operate the system has arrived
intact and undamaged. If anything is broken or missing, please contact your dealer.

 Remove all packing materials from the shipping box. Ensure that any foam and plastic padding is

removed, especially in the nozzle area.

 Place the fog machine on a flat surface and remove the fog tank cap.
 Fill with only with dealer-recommended high-quality fog liquid. Any other type of fluid can damage

the unit.

 Place the cap back on the liquid tank.
 Attach the Remote Controller cable to the controller input on the back of the machine.

2