Orion OR-793IPH Quick Manual

Chapter 1. Installand Specification

1.1 Safety Cautions

1.2 Package

1)Thiscameramaybe damagedby electricalandphysicalshock. Useregulated12VDC, 1Apowersupply. Donotthrow ordropitontofloor.

2)In caseit is installedat high location,be sureto mountsecurelyto preventthe unitfromfallingbelow.

3)In case the unitfails,Do nottry todisassemblethe product. Contact or consult the distributoror an authorized technician for after-sales service. Warrantyv

oidfor the productdisassembled without an authorization from the

distributororan authorized technician.

4)Allresponsibilityby usingthisunitison theuser.

5)Thisproducthas2 modelsaccordingto IRLED.

1.4 Specification

1.4.1 CameraSpecification

1.4.2 CameraFunction

1.4.3Network Specification

1.3 Howto Install

1.3.1Camerainstallation

Fixthe camera set with the supplied screws on ceiling or wall mount. Ifyou don'tusesuppliedscrews, the camera mayf

alloff. Puta sticker onthe ceiling and make holesaccordingto thespotsmarked on a sticker.

1.3.2 CameraAngleAdjustment

1.3.3 Lens Adjustment

1.3.4 Dimension

1) Panadjustment: Graspthe disk ofcameraand then adjustdirection tothe rightorleft(-160 ~ 190)

2) Tiltadjustment: Graspthe LEDcover ofcameraand then adjustdirection to theupor down(6 ~ 90)

3) Rolladjustment:Graspthecameraholderandthenrotate(-178 ~ 178 )

Afteropening

theLEDcover,

1)① By turningthe"Tele-Wide"knob, youcan

Access a rangeof focallengthswithin specified limits.

2) ② Sincethen,by turning the "Near-Far"knob,

youcanset thefocustowardthewantedobject.

° °

<Caution>If youtry toadjustthecameraoutof limited angle, itmightcause troubles

anddamageto camera.

3 4

1.4.4ElectricSpecification

1.4.5Alarm Input/Output

1.4.6AudioInput/Output

7 85

Ø100

Ø150.5

Ø129

LEDCOVER

DISK

CAMERAHOLDER

Ø3.5

Ø30

Ø3.5Ø30

MOUNTHOLE PLATE(STICKER)

Puta stickeronthe ceilingandmakeholes accordingtothespotsmarkedon a sticker

Puta stickeron theceilingandmakeholes accordingtothe spotsmarkedon a sticker

SCREWTp14x253EA

SCREW Tp14x253EA

ROTATION

Software& UserManualCD

Screw Tp1 3EA4x25

Camera Quick Guide

Iftheproductis tobeput outof operationdefinitively,takeitto a localrecyclingplantfora disposal whichisnot harmfulto the environment.

1.4.7BasicSettingTable

[Reference]In caseto resethardwareand network setting, ID and passwordof user

andAdministratorwillbe automaticallyreturnedtothe abovedefaultvalue.

*Framerate can beaffected bytheexternalvideo outputoption.

So factory default is off. When you install the camera, enable this option. Then disableitafterthe installation.

StaticIP

Enable

192.168.1.30

192.168.1.1

255.255.255.0

554

5000~ 5999

admin/admin

root/root,guest/guest

iplinker.net

H.26430fps@(1920x1080)

None

OFF

rtsp://<ipaddress>:554/stream1

rtsp://<ipaddress>:554/stream2

rtsp://<ipaddress>:554/stream3

Afterinstallation,deactivateit.

Network

StaticIP/DynamicIP

IPServer Enable

IPAddress

Gateway

SubnetMask

RTSPPort

RTPPortRange

IDand Password

UserID/Password

Domainof RelatedServer

DDNS

Server

Streamsetting

Stream1

Stream2

Stream3

Videoout*

Administrator ID/Password

WebConnection Port

Resolution

Min.Illumination

ModelNo.

Type

ImageSensor

EffectivePixels

Scanning System

AlarmInput/Output

IRLED

Lens

Item

Specification

Specifications

Item

Specification

Classification

Item

Summary

Image

Function

NetworkInterface

Setting

Security

PCOS

WebBrowser

Compression

Resolution

CompressionRate

FrameRate

BitRate

SimultaneousAccess

VideoRecording

MotionDetection

Privacy Zone

OSD

AlarmInput/Output

Dynamic IP

IPRouter

DDNS

NetworkSupport

SupportedProtocol

EmbeddedLinux

RJ4510/100BaseT,Ethernet

Bywebbrowser

Userauthentication

WINDOWSXP,WINDOWSVISTA,WINDOWS7

IE7.0orhigher

H.264,MPE

G-4,MJPEG

200:1(Typical)

Max.30fps(@1920X1080)

64~ 9000kbps

Max.10 users

Support

LeasedLine,CableModem,SupportDynamic IPand Static IP, ADSLusableunderRouter

TCP/IP,UDP/IP,RTP,RTSP,RTCP,NTP, HTTP,DHCP,FTP,SMTP,DNS,DDNS

RecordinginclientPCwithCMSor FTPServer

Classification Specification

PowerSupply

CurrentConsumption

OperationTemp.

Dimension

Weight

Max.1A(DC12V)IR LEDON

-45℃~ 50℃

Ø150.5x 95.6(H)mm

Approx.400g

Regulated12VDC,PoE(PoweroverEthernet)- IEEE802.3af

Item Default(Basicsetting) Remarks

Megapixelnetwork vandal-proofdome camera

1/2.8"SONYPROGRESSIVE SCANEXMORCMOS

1984(H)x 1225(V)

ProgressiveScan

Input: 1,Output: 1

Vari-focalautoiris megapixellens

OR-793IPH

24PCS

LEDOFF: 0.01Lux

LEDON: 0Lux(25MRange)

1920x1080/ 1280x1024/

1280x960/ 1280x720/ 1024x768/ 640x480/ 320x240

1920x1080/ 1280x1024/ 1280x960/ 1280x720/ 1024x768/ 640x480/ 320x240

MIC(Red)

LINEOUT(Black)

DC12V/100mA out

Alarm-in

GND

Alarm-out

Privacy Zone

Day&Night

WDR

SenseUp

WhiteBalance

Function

ON/ OFF(6 ProgrammableZones)

Auto /Night/ Day

WDR(1~ 5),(BackLight,FrontLight)

Auto(1~ 14)

Auto /Indoor/ Outdoor/ Fluorescent /User

Auto: 1/25~ 1/5,000(NTSC),1/12.5~ 1/8,000(PAL) SuppressRolling,Manual

ElectronicShutter

2 MEGA PIXEL NETWORK VANDAL-PROOF DOME CAMERA OR-793IPH SERIES QUICK GUIDE

1920x1080/1280x1024/1280x960/1280x720/

1024x768/960x540/640x480/640x360/320x240

1920x1080/1280x1024/1280x960/ 1280x720/1024x768/960x540/ 640x480/640x360/320x240

Power Consumption Max. IR LED ON 7W

2.2.5 Completetheinstallation

Upon installation,Web Viewerappearsandimage ofcamera isto be seen.

⑩

①

② ③ ④ ⑤ ⑥

⑧⑦ ⑨

2.2.3Input ID/Password

2.2.4Active-Xauto installation

Shownthe main page,input ID andPasswordand click on"Viewer" toseethe video feed.(Default administrator'sID &Password is 'admin'.)

Click "install" on thesecuritycertificate to load the Active-X control. Ifyouchoose "Don'tinstall", theweb viewer would notwork.

[Reference]

Please change default value of ID/Password into new ones after the installation.

Please referto 5.3 Administrator's

IDand PasswordChangeregarding

'Change Administrator'.

2.2.1Changethe settingvalueof PC networkenvironment

2.2.2Connect thecamera with web browser

SetIP Address, Subnet Mask and Gate-wayof user's PC with 192.168.1.50 /

255.255.255.0/ 192.168.1.1as shownon belowpicture.

Run web browser and input the default IP address(192.168.1.30) in URL line andpress "Enter".Then,below picture isto beshown.

※Ifthepagedoesnot open,Please refer to"Chapter 11append

ix"inthe CD.

Chapter 2. Installationand Video Check

2.1 Installation

2.2 NetworkSetting andVideo Check

On theassumptionthatUser PC andthe cameraare used under static IP,and the camerais tobedirectly connected with UserPC orLocal Network. Theinstallationprocedureis tobe;

1)Connect thecameraand PCwithLANCable.

2)Power oncamera.

※Useregulated 12V DC500㎃

or1A (Built-in IRLEDModel)

※Use PoE(Power Over Ethernet) : The cable includes data and power, so it's

easytoinstal

l the camera.So,you cansavetime toinstalland cost. Whenyou

connect thecamera withPoE andDCadaptor, OnlyPoEisused.

3)Waitabout2 minute afterpower on camera, thesystem willbe booted.

To connectthe unit inuser'sPC,changethe setting valueofPCnetworkenvironment.

onyourPC.

Defaultnetwork setting value ofthe unit is tobe;.

<Caution> Before changing thesetting value, please memorizethe previous setting

value

11 129

IPAddress :192.168.1.30 Subnet Mask : 255.255.255.0 Gateway : 192.168.1.1

3B25842B

②

③

①

※The specificationissubject tochange withoutanypriornotice toimprove thequality.

Item Description

⑩Status Icon

⑪StreamInfo.

Connect ordisconnecttothe stream Saves thestream as amovingpicturefileinthe .avi format Saves thesnapshot asan imagefileinthe .bmpformat Specify thefilesaving path Display camera title Display the date Display current time

Selectstream codec and resolutionmenurelatedto live-view wasdefinedonly by theadmin. (H.264/MPEG/MJPEG)

Defaultsizeis640X480. Adjust the screen totheoptimal size(Recommendation : Se

lect thesamesizewithstream resolution)

Displaythe site informationsuchas Day/Night,Motion, Alarminput/output

Displaythestreaminformation such asAudio and recordingcondition

①Streamselection

②Windowsize

④Recording ⑤Capture ⑥Savingpath ⑦Cameraname ⑧Date ⑨Time

③Connection/Disconnection

Remove this to activate LED

1.Please remove the connector to enable LEDs on the camera.

2.Connector for analog test output.

To Test cable

Orion OR-793IPH Quick Manual

Specifications and Main Features

Frequently Asked Questions

User Manual