Page 1
Introduction
This guide provides instructions for installing the Network Camera on your network.
For all other aspects of using the product, please see the User’s Manual, available from the Product
CD.
1. Check the package contents against the list below.
2. Install the hardware on page 1
3. Set the IP address on page 2.
Package Contents
Hardware Overview
Item
Descriptions
Network Camera
Compact Bullet IP Camera 1EA
Power Adaptor
PoE only
Camera Stand
Supplied with mounting screws
CD
User’s manual CD, including product documentation,
installation tools and other software
Printed Installation Guide
Installation Guide (this document)
Accessories
Sun Visor 1Ea
Sun Visor Hold
Knob 1Ea
Screw for
Camera Sand 3Ea
Screw
anchor 3Ea
L-Wrench 1Ea
LENS
Fixed lens
IMPORTANT
Th
is product must be installed in compliance with local laws and regulations.
Page 2
Installation
1) Assembly the sun visor and camera.
2) Connect the Wall bracket and camera.
3) Connect the cables
1. Connect the camera to the network using a shielded network cable.
2. Connect the power.
• PoE (Power over Ethernet): This is automatically detected when the network cable is connected.
4) Fix the wall bracket on place that user want to install
Page 3
Assign an IP address
Most networks have a DHCP server that automatically assigns IP addresses to connected devices.
If your network does not have a DHCP server, the IP Camera will use 255.255.255.255 as the default IP
address.
In case you would like to assign a static IP address, the recommended method in Windows is IP Utility.
Recommended for Operating system
Windows 2000
Windows XP
Windows XP Pro
Windows 2003 Server
Windows Vista
Windows 7
Notes:
• In case assigning the IP address fails, check whether there is no firewall blocking the operation.
Admin Tool
Admin Tool automatically discovers and displays the devices on your network. The application could
also be used to manually assign a static IP address.
Note that the computer running Admin tool must be on the same network segment (physical subnet)
as the IP Camera.
The default setting of the camera is set to “DHCP”. If you have a DHCP server on your
network, you can find the network camera in “My network”.
If a DHCP server is not available on your network, please assign IP address by the following
process.
1) Execute Admintool.exe and click “Search” button.
2) After the camera is listed in camera list, select the camera.
3) Type in the all network information.
4) Click “Apply” button, the setting will be showed in the list.
5) Click “Setting” Button to set network information to the camera.
Then double click the camera in the list, Internet explorer will open automatically.
Page 4
Web browser connection
Note: The Network camera supports Internet Explorer 7 or above.
Please check version of your browser and update it if necessary.
When you first access the camera you need to download and install an Active X control from
the camera to display a live image.
Default User and Password are set to “ADMIN” and “1234”. Please type in the user ID and
password to connect the network camera.
Loading...