Orion GST-2050 User Manual

Download

Page 1

HD-SDI 3-AXIS DAY & NIGHT

IR DOME CAMERA

GST-2050

MANUAL

◐ HOW TO INSTALL

1. Openingthe dome

2. Removing the dome

3. Camera installation

Pushingthe latch button.(Removethe protection

sheet after installing.)

Lift the dome. When you push the latch

button,it is unlocked and youcan lift the dome.

(1) Fix the cameraset withthe suppliedscrews onceiling or wall mount.

If you don't use supplied screws, the camera may fall off.

(2) Please refer to '4. Camera angle a djustment' regarding adjust

camera angle.

(3) Lens adjustment(Vari-focal Lens only)

After opening the LED cover, ① By turning the "Tele-Wide" knob,

you can access a range of focal lengths within specified limits.

② Since then, by turning the "Near-Far"

knob, you can set the focus toward the wanted object.

(4) Re-assemble the camera.

4. Camera angle adjustment :

(1) Pan adjustment

(2)Tiltadjustment

(3) Roll adjustment

: Grasp the disk of camera and then adjust

direction to the right or left(-180 ~ 180 )

: Grasp the LED cover of camera and then adjust

direction tothe up or down(6 ~ 90 )

: Grasp the camera holder and then rotate

(-178 ~ 178 )

˚ ˚

◐ DIMENSION

◐ ASSEMBLY

<Caution> If you t ry to adjust the camera out of limited angle, it might cause

troubles and damage to camera.

ROTATION

LED COVER DISK

CAMERAHOLDER

SCREW TP1

3.5x202EA

SCREW TP1

3.5x202EA

DOME COVER

LED COVER

SCREW

CAMERA MODULE

SCREW

CABLE

DISK

BASE

CONTROLPC B

PUSH BUTTON

HARNESS

SCREW

◐PRECAUTION

◐FEATURES

1. Do not install the camera outdoors.

2. Choose an ideal location for the camera, since a c amera unit must be protected against moisture and vibration.

3.Be careful notto scratchthe cameraunit, especially lens or dome cover.

4. Use the camera within the temperature(-10℃ ~ 50℃).

5.Handle withcare. Droppingit cancauseserious damage to the camera.

6. Avoid any direct sun light toward the lens.

1. Full HD(1920x1080P) image via HD-SDI interface with conventional coaxial connection

2. Defog : Defog technology enhances visibility in real-time in fog,

smoke, lowlight, dust and etc. conditions

3. Smart IR : When IR LED is turned on in B/W, the objects can be

clearly identified due to the function that decreases screen saturation of objects within a short distance

4. Adopted Smart DNR technology, It reduces noise efficiently in low

light condition

5. Provide Max. 64X digital zoom

6. Day & Night function(ICR)

7. Support 8 different privacy zone

8. This camera is incredibly flexible to install with its 3-axis camera

construction, which makes the camera ceiling, wall or slope mountable

9. 25M range visible in total darkness with 24pcs of IR LEDs.(Indoor)

10. Multi-language full OSD support

Use the AC adaptor 12V DC or 24V AC, 1A.

If the product is to be put out of operation definitively, take it to a local recycling plant for a disposal which is not harmful to the environment.

PROTECTIONSHEET

LATCH BUTTON

Ø100

Ø130.8

Ø109

Page 2

◐SPECIFICATION

◐FUNCTION SETTING

1. How to use the jog lever

①SET : ② ③ : ④ ⑤ :

⑥EXT-VIDEO:

Used to access the menu and confirm selection.

UP, DOWN LEFT, R IGHT

Used to move the cursor to up or down.

Used to move the cursor to leftor right andc hange

the value.

Extra video output terminal for installation.

Plug your test monitor in hear. The cable is option.

3B25415A

2. OSD menu structure

※All specificationis subject to change without noticeto improvethe quality.

Function

settingmen u

MOTION

PRIVACY

LANGUAGE

DEFECT

RS485

VERSION

SHARPNESS

MONITOR

OSD

LSC

NTSC/PAL FACTORY

SELECT

DISPLAY

SENSITIVITY MOTION VIEW DEFAULT SELECT

DISPLAY

COLOR DEFAULT ENG, JPN,

CHN1,CHN2

LIVE DPC

LEVEL STATIC DPC START LEVEL

SENS-UP

CAM ID ID DISPLAY BAUDRATE

SHARPNESS LEVEL RESOLUTION

CRT

LCD

TEXT OLOR OUTLINE

Select themotion detectionzone(1~3) Display the zone or not and adjust the size &

position Motiondetection sensitivitysetting Select notificationmethod of motion detection Reset thesetting of MotionDetection Select theprivacy zone(1~8) Display the zone or not and adjust the size &

position Select themask color Reset thesetting of PRIVACY Select thelanguage

(English,Japanese, Chinese 1, Chinese2) Defective pixel compensation reflect real time

or not LIVE DPC LEVELsetting Appointthe defectivepixel or not Start defective pixels compensation STATIC DPC LEVELsetting SENSE-UPlimit setting when finding defective

pixels Select thecamera IDfor RS-485communication Displaythe CAM ID on the screen Select baudrate Firmware versiondisplay Sharpness functionO N/ OFF Increasing this valuesharpens objectedges Enhancesthe image quality Black Level : Contrast adjustable Blue Gain: Blue gain adjustable Red Gain: Red gain adjustable Gamma :G amma adjustable Blue Gain: Blue gain adjustable Red Gain: Red gain adjustable OSD colorselection OSD outline Use the brightnesscompensation of four lens'

corners(LSC) or not NTSC/PAL selection Reset your camerato factory defaultcondition Escapethe menu

AUTO

X2~X60

AUTO/OFF X2~X60 1~100

OFF, LOW, MIDDLE, HIGH

OFF

BLC

HSBLC

DELAY

D→N(CDS) N→D(CDS)

BURST

IR SMART

IR LED IR PWM

S-LEVEL E-LEVEL

FREEZE MIRROR

D-ZOOM

NEG.IMAGE

Vari-focal autoiris DC lens Vari-focal autoiris VIDEO lens Fixed focal lens Shutterspeed auto adjustable

Select shutter speed manually

AGC level selectable Using senseup when it is low luminance Sense up limit setup(X2~X60) Adjustthe brightness WidenDYNAMIC RANGEby gammaadjustment Enhancesvisibility in fog, smoke, lowlight,dust

etc.conditions Deactivates the BackLight function Gain : BLCLEVEL setup Area :BLC area setup Default: Reset the setting of BLC Hight lightSuppress BLCsetting Select : SelectHSBLC zone(1~4) Display : Display the zone or not and adjust

the size& position Level: Level adjust Mode: Use thefunctionat nightonly orall day BlackMask : Thefunctionactivate/ deactivate Default: Reset the setting of HSBLC Adjustthe white balancemanually Adjustthe white balanceautomatically Move the camera lens toward to white paper

then press the set button to find the optimal white balance for current environment

Optimized White balance forI ndoor Optimized White balance forO utdoor Select the duration time about changing the

day ↔ nightmode(0~60) Not adjustable Not adjustable Fixed atcolor(LED OFF) Fixed atB/W Determines whetherto transmit the burst signal

or notin B/Wmode Decreases screen saturation of objects within

a short range IR LED ON/OFF control IR LED outputlevel adjustable Day & Night can be changed using external

signal(Not available) Reducing noise by arithmetic processing of

pixels around Reducingnoise byarithmetic processingof time Start level of 3DNR function End level of 3DNR function Noise Reduction sensitivity Noise reduction activates depending on the

circumstances Displaythe camera name onthe screen Still image Flip thepicture horizontally and/orvertically PIP :Display the Picturein Picture imageor not D-Zoom :Use a digital zoomof X2 ~ X64 Pan&Tilt : Zoomed in image can be moved to

horizontal & vertical Default: Reset the setting of Digital ZOOM NEGATIVE image

1. LENS

2. EXPOSURE

3. WHITEBAL.

4. DAY&NIGHT

5. NR

6. SPECIAL

7. ADJUST

8. RESET

9. EXIT

LOW, MIDDLE, HIGH

OFF, LOW, MIDDLE, HIGH

A : ORANGE(RX +)

B : WHITE(RX -)

Function

RX + RX -

Remark

RS-485A RS-485B

A B

3. How to control through RS-485 communication

4. Cable array

1) Match the camera with controller's ID, baudrate and protocol

2) Up, Down, Left and right of Jog lever is same as Up, Down, Left and right of RS-485 controller

3) Enter of Jog lever is the same as menu key or IRIS open key of RS485 controller

Selectme nu ContentsSub menu

1/30(1/25)~1/50000

GST-2050

1/3" 2.1MegapixelCM OS

ProgressiveScan

1944(H)x 1092(V)Pixel

50dB or More

1080P(1920 x 1080)30fps

HD-SDI/ 1.0 Vp-p(75Ω,Composite),N TSC/PAL(Selectable)

1.0Lux(Color), 0.5Lux(BW), 0.02Lux(Sens-upx60)

1/25 ~ 1/50,000sec

AWB/ AWC-SET / MANUAL/ INDOOR / OUTDOOR

BLC / HSBLC / OFF

LOW/ MIDDLE / HIGH / OFF

LOW / MIDDLE / HIGH

SHARPNESS/ MONITOR / LSC / NTSC/PAL

English, Japanese, Chinese(Selectable)

ICR(AUTO / COLOR / BW)

2DNR / 3DNR/ SMART NR

ON / OFF(X2 ~ X64)

ON / OFF(8Zone Selectable)

ON / OFF(3Zone Selectable)

LIVE DPC/ STATICD PC

ON / OFF(Selectable limit ~ X60)

FREEZE / MIRROR / D-ZOOM / NEG.IMAGE

RS - 485(BaudRate : 2400 ~ 38400)

Pelco-D

Vari-focalauto iris lens

12V DC/24V AC Dualvoltage

Max. 600mA(at12V DC, 24VA C): LED ON

-10℃ ~ 50℃

-20℃ ~ 60℃

Ø130.8x 101(H) mm

Approx.500g

Model No.

Image Sensor

Effective Pixel

PrivacyZone

Communication

PowerSupply

ScanningSystem

S/N Ratio

Video Output Mode

Video Output Level

Min. Illumination

ShutterSpeed

White Balance

Backlight

ACCE(DWDR)

AGC

Adjustment

OSD

Day & Night

2D/3D-NR

DigitalZoom / PIP

Motion Detection

DefectPixel Compensation

Sense-up

D-Effect

Protocol

Lens

CurrentConsumption

Operation Temp.

Preservation Temp.

Dimension

Weight

DC VIDEO(N/A) MANUAL

SHUTTER

AGC

SENSE-UP

BRIGHTNESS ACCE

DEFOG

BACKLIGHT

MANUAL ATW

AWC→SET

INDOOR OUTDOOR

AUTO

COLOR

B/W

EXT

2DNR

3DNR

LEVEL

SMART NR

CAM TITLE

D-EFFECT

Orion GST-2050 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual