ORION CO235, CO265, CO2105, CO435, CO465 Owners Manual

...

Your Cobalt amplifier may differ from the picture.

Owners Manual: (revised)

COBALT Amplifiers: including: CO235, CO265, CO2105, CO435, CO465, CO235xp, CO265xp, CO2105xp, CO435xp, CO465xp, CO302, CO702 and CO304.

Bridging of the COBALT Amplifier:

1. Use the Left+ for Positive.

2. Use the Right- for Negative.

3. 4 Channel amps bridge with L+ and R- in Front and Rear.

Setting the Input of the Cobalt Amplifier:

 The amplifier will accept up to 5volts of input signal. The amplifier will make full power with as little as 1v of input.

Setting the Crossovers on the Cobalt Amplifier:  There are 2 types of crossovers on Cobalt amplifiers.

The first is a 100hz fixed high pass or low pass. The second is a fully variable high pass or low pass crossover that is adjustable from 45hz to 5Khz. Both use a slope of 12dB per octave. The chart below shows the type of crossover your amp uses.

Amp Model

CO235

CO435

CO265

CO465

CO2105

CO235xp

CO435xp

CO265xp

4ohm Power

35 x 2

35 x 4

65 x 2

65 x 4

105 x 2

50 x 2

50 x 4

75 x 2

WIRING DIAGRAM FOR 4 CHANNELS

REMOTE

RR(+)

RR(-)

LR(-) LR(+)

Lowest Recommend Impedance in Stereo

2ohm

Fuse Size

20 amp

30 amp

40 amp

20 amp

30 amp

S/N

100dB

THD

0.03%

WIRING DIAGRAM FOR CO230, CO260,CO2100

FL(+)

FL(-) FR(-) FR(+)

Speaker

Level input

REMOTE RIGHT (-)

Crossover Type

FIXED

VARIABLE

FIXED

VARIABLE

RIGHT (+)

Dimensions L x W x H

6" x 10" x 2.4"

10" x 10" x 2.4"

8" x 10" x 2.4"

13" x 10" x 2.4"

12" x 10" x 2.4"

6" x 10" x 2.4"

10" x 10" x 2.4"

8" x 10" x 2.4"

LEFT (-) LEFT (+)

CO465xp

CO2105xp

CO302

CO304

CO702

75 x 4

125 x 2

30 x 2

30 x 4

70 x 2

2ohm

40 amp

20 amp

40 amp

30 amp

100dB

0.03%

YES

VARIABLE

FIXED

VARIABLE

13" x 10" x 2.4"

12" x 10" x 2.4"

6" x 10" x 2.4"

10" x 10" x 2.4"

8" x 10" x 2.4"

For questions on this or any other Orion Products, call Technical Support at 1-480-705-5600.