Page 1
Orion® X-Y Guide Star Finder
#52061
Congratulations on your purchase of the Orion X-Y Guide Star
Finder. Your Guide Star Finder enables you to easily acquire a
guide star through your guide scope without the need to physically
move the position of the guide scope. This convenient astro-imaging accessory thereby eliminates the need to use adjustable guide
scope tube rings which also reduces tracking problems associated
with tube flexure.
Attaching the X-Y Guide Star
Finder to a Guidescope
The Guide Star Finder is equipped with a standard removable
1.25" nosepiece and female camera T-threads, ready to attach to
most telescopes. You can either insert the Guide Star Finder like
an eyepiece using the 1.25" nosepiece, or attach it directly to your
guide scope focuser using the T-threads.
Using the 1.25" Nosepiece
If your telescope features a 1.25" focuser or adapter, the easiest
way to attach the Guide Star Finder is by using the included 1.25"
nosepiece. Simply insert the nosepiece into your telescope’s 1.25"
adapter and secure it by tightening the thumbscrew (Figure 1).
1.25"
nosepiece
1.25"
adapter
Figure 1. Insert the guide star finder’s nosepiece into your telescope’s
1.25" adapter.
T-threads
Using T-threads
Some Orion telescopes (in this case, used as a guide scope) feature focus adapters with exterior T-threads. If you are using such
a telescope, you can attach the Guide Star Finder body directly
to the T-threads without using the 1.25" nosepiece. Remove the
1.25" nosepiece. Then carefully attach the Guide Star Finder body
to the T-threads (Figure 2).
Attaching an Autoguider to the X-Y Guide Star Finder
The X-Y Guide Star Finder’s 1.25" eyepiece holder accommodates
any standard autoguider with a 1.25" nosepiece (such as the Orion
StarShoot AutoGuider). Simply insert the autoguider into the eyepiece holder and secure the locking thumbscrew. You can alternatively use a reticle eyepiece if you are not using an auto guider.
The Guide Star Finder requires approximately 38mm of additional
inward focus travel.
Adjusting the X-Y Guide Star
Finder
The Guide Star Finder moves your autoguider within the focal
plane of your guide scope to find a guide star. If, for example, a
guide star is not found in the center of the guide scope’s focal
plane, a star may still exist somewhere off-axis in the same focal
plane. By adjusting the position of the Guide Star Finder, you can
find and center a guide star anywhere in the focal plane without
physically moving the guide scope.
The Guide Star Finder can be adjusted in the “X” and “Y” axes,
or relative up/down and left/right (Figure 3). Simply turn the position adjustment knobs clockwise or counter-clockwise to move the
Figure 2.
guide star finder body onto your telescope’s T-threads.
Y axis, or
up/down
adjustment
Figure 3. The guide star finder can be adjusted in the “X” and “Y”
axes. Each axis has two position adjustment knobs to provide easy
access at different guide scope orientations.
Remove the guide star finder’s nosepiece and thread the
X axis, or left/right adjustment
IN 341 Rev B 02/09
Page 2
Figure 4.1 and 4.2. Simply turn the position adjustment knobs clockwise or counter-clockwise to move the Guide Star Finder as needed to locate
a guide star. (Shown with optional StarShoot AutoGuider, available from Orion.)
Guide Star Finder as needed to locate a guide star (Figure 4.1 and
4.2). Each axis has two position adjustment knobs to provide easy
access at different guide scope orientations.
Care and Storage
The X-Y Guide Star Finder is very durable, but it should be treated
with care to last a lifetime. Store the Guide Star Finder in its original packaging when not in use.
Specifications
Body construction: Machined aluminum
Adjustment range: +/- 13.8mm (0.54") in X and Y
Additional inward focus
travel requirement: 38mm (1.5")
Camera connection: Removable 1.25" holder,
optional female T-threads
Guide scope connection: Removable 1.25" nosepiece,
optional female T-threads
Dimensions: 96.5mm x 96.5mm x 69.8mm
(3.8" x 3.8" x 2.75")
Weight: 340g (12oz.)
One-Year Limited Warranty
The Orion X-Y Guide Star Finder is warranted against defects in materials or workmanship for a period of one year from the date of purchase. This warranty is for
the benefit of the original retail purchaser only. During this warranty period Orion Telescopes & Binoculars will repair or replace, at Orion’s option, any warranted
instrument that proves to be defective, provided it is returned postage paid to: Orion Warranty Repair, 89 Hangar Way, Watsonville, CA 95076. If the product is not
registered, proof of purchase (such as a copy of the original invoice) is required.
This warranty does not apply if, in Orion’s judgment, the instrument has been abused, mishandled, or modified, nor does it apply to normal wear and tear. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. For further warranty service information, contact: Customer
Service Department, Orion Telescopes & Binoculars, 89 Hangar Way, Watsonville, CA 95076; (800) 676-1343.
Providing Exceptional Consumer Optical Products Since 1975
OrionTelescopes.com
Customer Support (800)‑676‑1343
E‑mail: support@telescope.com
Corporate Offices (831)‑763‑7000
89 Hangar Way, Watsonville CA 95076
Loading...