ORiNG TES-3082GT-M12-BP1 Quick Installation Manual

Quick InstallationGuide

Version 1.0

Quick Installation Guide

Introduction

PRINTED ON RECYCLED PAPER

QIG

The is a managedEthernet switch designedfor
industrial applications,such as rollingstock, vehicle, andrailway
applications. Theswitch boasts EN50155 compliance and M12 connectors
to ensure tight and robust connections, and guarantee reliable operation
against environmental disturbances, such as vibration and shock. Besides
eight 10/100Base-T(X) ports, the switch alsoprovides one set of bypass
ports that ensure constant network connectivity if power outage or node
failure occurs. In such situations, the device will bypass the inactive
switch and continueto transfer networktraffic to thenext switch inthe relay.

TES-3082GT-M12-BP1

Package Contents

Installation

Wall-mount

The devicecan be fixedto the wall.Follow the stepsbelow to installthe device onthe wall.

Hold the evice upright against the wall
Insert four screws through the large opening of the keyhole-shaped apertures at the

top and bottom of the unit and fastenthe screw tothe wall witha screwdriver.

Slide the evice downwards and tighten the four screws for added stability.

Step 1:
Step 2:

Step 3:dd

The series is shipped with the following items. Ifany
of these items is missing or damaged,please contact your customer service
representative for assistance.

TES-3082GT-M12-BP1

Preparation

Before youbegin installing thedevice, make sureyou have allof the package
contents availableand a PCwith Microsoft InternetExplorer 6.0 orlater, for
using web-basedsystem management tools.

Elevated OperatingAmbient:

ReducedAir Flow:

Mechanical Loading:

Circuit Overloading:

If installedin a closed environment, makesure
the operating ambient temperature is compatible with the maximum
ambient temperature (Tma) specified by the manufacturer.

Make surethe amount ofair flow requiredfor safe operation

of theequipment is notcompromised during installation.

Make surethe mounting ofthe equipment is not in a

hazardous conditiondue to unevenmechanical loading.

Consideration shouldbe given tothe connection ofthe
equipment tothe supply circuitand the effectthat overloading ofthe circuits
might haveon overcurrent protectionand supply wiring.Appropriate
consideration ofequipment nameplate ratingsshould be used when addressing
this concern.

Safety & Warnings

For pinassignments of power,console andrelay output ports,please refer tothe following tables.

Contents

TES-3082GT-M12-BP1

Pictures Number

1

CD

1

Dimension

Panel Layouts

Front View

1. Resetbutton

2. Power1status LED

3. Power2status LED

4. R.M.status LED

5. Ringstatus LED

6. FaultLED

7.Relayoutputport

8. Consoleport

9. Powerconnector

10. Ethernetports

11. LNK/ACTindicator for Ethernetport

12. Duplex/collisionindicator for Ethernetport

13. LNK/ACTindicator for GigabitEthernet port

14. Speedindicator for GigabitEthernet port

15. Gigabit Ethernet ports

Wiring

Grounding

Grounding andwire routing helplimit the effectsof noise dueto electromagnetic interference
(EMI). Runthe ground connectionfrom the groundingpin on thepower connector tothe grounding
surface priorto connecting devices.

Power portpinouts

The devicesupports two setsof power suppliesand uses theM23 5-pin
female connector on the front panel for the dual power inputs.

Insert a power cableto the powerconnector on thedevice.
Rotate theouter ring ofthe cable connectoruntil a snug fit is

achieved. Make sure the connection is tight.

Step 1:
Step 2:

V1+

V1-

V2+

V2-

Relay outputport pinouts

Relay

N.C.

1A@24VDC

Network Connection

The switchhas eight 10/100Base-T(X)and two 10/100/1000Base-T(X)Ethernet ports inthe form of
M12 connector.Depending onthe link type,the switch usesCAT 3, 4,5,5e UTPcables to connect
to network devices (PCs,servers, switches, routers,or hubs). Pleaserefer to thefollowing table
for cablespecifications.

4-Pin FastEthernet Port Definition

TES-3082GT-M12-BP1

TES-3082GT-M12-BP1

1907-2-29-TES3082GTM12-1.0

Switch

EN50155

EN50155 10-port managed

Ethernet switch

INDUSTRIAL

65.0

1

Instead ofscrewing the screwsin all theway, itis advised to
leave aspace of about2mm to allowroom for slidingthe
switch betweenthe wall andthe screws.

The switchuses the M12A-coded 5-pinmale connector on
the frontpanel for relayoutput. Use apower cord withan
M12A-coded 5-pin femaleconnector to connectthe relay.
The relaycontacts will detectuser-configured events and
form anopen circuit when an eventis triggered.

Cable Type Max. Length Connector

10BASE-T Cat. 3, 4,5 100-ohm UTP100 m (328ft)

4-pin female M12

D-codingconnector

100BASE-TX Cat. 5100-ohmUTP UTP100m (328ft)

4-pin female M12

D-codingconnector

1000BASE-T Ca t.5/Cat. 5e 100-ohmUTP UTP 100m (328ft)

4-pin female M12

D-codingconnector

*2 (GxA&G xB)

For pinassignments of theLAN ports, pleaserefer to thefollowing tables.

QIG

1

170.1

196.0

R2.5

R4.00

155.8

75.0 21.3

15.0

6.50

178.0

151.6

132.1

G1B

G1A

G2B

G2A

Power
Failure
Bypass

P1 P5

P2 P6

P3 P7

P4 P8

LNK/ACT

DPX/COL

V1+

V1-

V2+

V2-

Power

Console

N.C.

RXD

RS-232,9600bps,8,N,1

GND

TXD

N.C.

3A@24VDC

Relay

N.C.

RelayOutput

FaultRingR.M.PWR2PWR1

TES-3082GT-M12-BP1

LNK/ACT

DPX/COL

LNK/ACT

DPX/COL

LNK/ACT

DPX/COL

GxA GxB

LNK/ACT

100M

Tx+

Rx+

Tx-Rx-

DA+

DB+

DA-DB-

DC+

DD+

DC-DD-

P1~P8

Power
Failure
Bypass

LNK/ACT

100M

Reset

G1B

G1A

G2B

G2A

Power
Failure
Bypass

P1 P5

P2 P6

P3 P7

P4 P8

LNK/ACT

DPX/COL

V1+

V1-

V2+

V2-

Power

Console

N.C.

RXD

RS-232,9600bps,8,N,1

GND

TXD

N.C.

3A@24VDC

Relay

N.C.

RelayOutput

FaultRingR.M.PWR2PWR1

TES-3082GT-M12-BP1

LNK/ACT

DPX/COL

LNK/ACT

DPX/COL

LNK/ACT

DPX/COL

GxA GxB

LNK/ACT

100M

Tx+

Rx+

Tx-Rx-

DA+

DB+

DA-DB-

DC+

DD+

DC-DD-

P1~P8

Power
Failure
Bypass

LNK/ACT

100M

Reset

7

8

9

10 12 15

2
3
4

6

5

11

14

13

2
Tx+

1

Rx+

Tx-4Rx-

3

Pin No. Description

#1

RD+

#2

TD+

#3

RD-

#4

TD-

4-Pin GigabitPort Definition

GxA GxB

2
DA+

1

DB+

DA-4DB-

3

2
DC+

1

DD+

DC-4DD-

3

Configurations

After installingthe router and connecting cables, start the evice by turning on
power.The green powerLED should turnon. Please refer to the following tablet
for LED indication.

d

Pin No. GxA Description

#1

DB+

#2

DA+

#3

DB-

#4

DA-

Pin No. GxB Description

#1

DD+

#2

DC+

#3

DD-

#4

DC-

QIG

Quick InstallationGuide

PRINTED ON RECYCLED PAPER

Quick Installation Guide

ORing IndustrialNetworking Corp.

Copyright© 2014 ORing

All rightsreserved.

TEL: [phone]
FAX:[phone]

Website: www.oring-networking.com
E-mail: [e-mail]

Version 1.0

QIG

Specifications

Switch

EN50155

INDUSTRIAL

Power

RedundantInput Power

PowerConsumption(Typ.)

DualDC inputs. 12~48VDCon 5-pin M23connector

11Watts

Physical Characteristic

Enclosure

IP-30

Dimension(WxDxH)

125(W)x 65(D) x196(H) mm (4.92x 2.56 x7.66 inch.)

Weight (g)

1338g

Environmental

-40to85C(-40to185F)

oo

StorageTemperature

5%to 95% Non-condensing

OperatingHumidity

Regulatory Approvals

FCCPart 15, CISPR(EN55022) class A,EN50155 (EN50121-3-2, EN55011,EN50121-4)

EMI

EN61000-4-2(ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5(Surge),
EN61000-4-6(CS), EN61000-4-8, EN61000-4-11

EMS

IEC60068-2-27

Shock

IEC60068-2-32

IEC60068-2-6

Vibration

FreeFall

Warranty

5years

LED Indicators

PowerIndicator

Green:Power LED x2

EN60950-1

Safety

R.M.Indicator

Green:IndicatesystemoperatedinO-RingMastermode

10/100Base-T(X)M12 Port
Indicator

Greenfor port Link/Act. Amber for Collision/Duplexindicator.

Fault Contact

Relay

Relayoutput to carrycapacity of 3Aat 24VDC onM12 connector (5-pinM12 A-coding)

OverloadCurrent Protection

ReversePolarity Protection

Present

Present

-40to70C(-40to158F)

oo

OperatingTemperature

ORing SwitchModel

10/100Base-T(X) Ports in
M12Auto MDI/MDIX

8 xM12 connector (4pin D-coding)

Physical Ports

Technology

EthernetStandards

IEEE802.3 for 10Base-T
IEEE802.3u for 100Base-TX
IEEE802.3ab for 1000Base-T
IEEE802.3x for Flowcontrol
IEEE802.3ad for LACP(Link Aggregation ControlProtocol)
IEEE802.1D for STP(Spanning Tree Protocol)
IEEE802.1p for COS(Class of Service)
IEEE802.1Q for VLANTagging
IEEE802.1w for RSTP(Rapid Spanning TreeProtocol)
IEEE802.1s for MSTP(Multiple Spanning TreeProtocol)
IEEE802.1x for Authentication
IEEE802.1AB for LLDP(Link Layer DiscoveryProtocol)

2KMAC addresses

MACTable

4

PriorityQueues

TES-3082GT-M12-BP1

LED Color Stat us Desc ription

PWR1 Green On DC power modul e 1 activated

PWR2 Green On DC power modul e 2 activated

R.M Green On Syst em running in Ri ng Master mode

On System running i n Ring mode

Ring G reen

Blinking Ring is brok en

Fault Amber On Errors occur (power f ailure or port link down)

10/100Base-T( X) Ports

On Port is linked

LNK/ACT Green

Blinking Transmitt ing data

On Port runnin g in full-d uplex mode

DPX/COL Amber

Blinking Collision occurs

10/100/1000Base- T Ports

On Port is linked

LNK/ACT Green

Blinking Transmitt ing data

100M Amber On Port spee d at 100M

1. Launchthe Internet Explorerand type inIP address ofthe device.The default static
IP addressis 192.168.10.1

Follow thesteps below tolog in andaccess the system:

2. Login with defaultuser name andpassword (both are ).admin

3.After logging in,you should seethe following screen.For more informationon
configurations, pleaserefer to theuser manual. Forinformation on operatingthe device
using ORing’sOpen-Vision management utility, pleasego to ORingwebsite.

Resetting

Torestore the device configurations back to the factory defaults, press the
button for a few seconds. Once the power indicator starts to flash, release the
button. The device will then reboot and return to factory defaults.

Reset

10/100/1000Base-T(X)ports
inM12

2x(combinig2xM12connectors4-pinD-codingfor1Gigabitport)

RS-232Serial Console Port

RS-232 inM12 connector (A-coding).Baud rate setting:9600bps, 8, N,1

Store-and-Forward

Processing

SwitchProperties

Switchinglatency: 7 us
Switchingbandwidth: 5.6 Gbps
Max.Number of AvailableVLANs: 4096
IGMPmulticast groups: 1024
Portrate limiting: UserDefine

SecurityFeatures

Enable/disableports, MAC basedport security
Portbased network accesscontrol (802.1x)
VLAN(802.1Q) to segregateand secure networktraffic
SupportsQ-in-Q VLAN forperformance & securityto expand theVLAN space
Radiuscentralized password management
SNMPv1/v2c/v3 encrypted authenticationand access security

SoftwareFeatures

STP/RSTP/MSTP(IEEE 802.1D/w/s)
RedundantRing (O-Ring) withrecovery time lessthan 10ms over250units
TOS/Diffservsupported
Qualityof Service (802.1p)for real-time traffic
VLAN(802.1Q) with VLANtagging and GVRPsupported
IGMPSnooping for multicastfiltering
Portconfiguration, status, statistics,monitoring, security
SNTPfor synchronizing ofclocks over network
SupportPTP Client (PrecisionTime Protocol) clocksynchronization
DHCPServer / Clientsupport
PortTrunk support
MVR(Multicast VLAN Registration)support
ModbusTCP

NetworkRedundancy

O-Ring
Open-Ring
O-Chain
MRP
STP/RSTP/MSTP

Warning/ Monitoring System

Relayoutput for faultevent alarming
Syslogserver / clientto record andview events
IncludeSMTP for eventwarning notification viaemail
Eventselection support

O-RingIndicator

Green:IndicatesystemoperatedinO-Ringmode

FaultIndicator

Amber:Indicate unexpected eventoccurred

10/100/1000Base-T(X)M12
PortIndicator

Greenfor Link/Act. Amber for 100Mbpsindicator

TES-3082GT-M12-BP1

TES-3082GT-M12-BP1

EN50155 10-port managed

Ethernet switch