Origin Instruments headmouse nano User Manual

HeadMouse
®
Nano
User Guide
HeadMouse Nano User Guide
Origin Instruments Corporation Page 2
Table of Contents
Table of Contents ......................................................................... 2
Legal Notices ................................................................................ 3
FCC / CE Notice ........................................................................... 3
Application Disclaimer .................................................................. 4
Introduction ................................................................................... 5
Hardware Description ................................................................... 6
Setup and Installation ................................................................ . 10
Mounting ................................................................................. 10
Universal Mounting Bracket .................................................... 11
Connection ................................................................................. 14
Using HeadMouse Nano ............................................................. 14
Tracking Status ................................................................... 14
General Use ........................................................................ 15
Pointer Position ................................................................... 15
Pointer Control .................................................................... 16
Mode Switch Settings ................................ ................................ . 17
Dual and Multiple Switches ......................................................... 19
Technical Specifications ............................................................. 20
General Care and Maintenance .................................................. 20
Customer Support ...................................................................... 20
Warranty Information ................................................................ .. 21
Replacement Targets ................................................................. 23
HeadMouse Nano User Guide
Origin Instruments Corporation Page 3
Legal Notices
Information in this User Guide is provided “as is” by Origin
Instruments, is subject to change without notice, does not represent a commitment on the part of Origin Instruments, and is provided without warranty of any kind, either expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or information storage and retrieval systems, for any purpose other than the purchaser’s personal use, without the express written permission of Origin Instruments.
Origin Instruments is not responsible for any problems caused by unauthorized modification of the HeadMouse Nano and will not be responsible for direct or consequential damages associated with any use of the HeadMouse Nano product.
FCC / CE Notice
Products bearing the CE marking have been tested and are declared by Origin Instruments Corporation of 854 Greenview Drive, Grand Prairie, Texas 75050, USA to be in conformity with the following standards or other normative documents and following the provisions of the Electromagnetic Compatibility Directive, 89/336/EEC:
EN 55022 Class B Emissions (Radiated Emission)  EN 61000-4-2, Electrostatic Discharge Immunity  EN 61000-4-3, Radiated Immunity
Origin Instruments Corporation has tested the HeadMouse Nano and found that it complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
HeadMouse Nano User Guide
Origin Instruments Corporation Page 4
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
If this product is suspected of causing interference to a radio or television receiver, remove and apply power to the equipment and determine whether it is the cause of the disturbance. If a problem exists, the user is encouraged to try and correct the problem by one of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and the receiver.
3. Reorient the equipment cables.
4. Consult the dealer or Origin Instruments for additional suggestions.
Information in this document is subject to change without notice and does not represent a commitment on the part of Origin Instruments Corporation.
Application Disclaimer
HeadMouse Nano is designed for use by people who have limited or no motor capability enabling USB mouse operations. However, it should not be used in an application where personal injury or property loss could occur if the HeadMouse Nano failed for some reason. Origin Instruments products are not authorized for
use as surgical aids or as part of a system intended to support or sustain life. The user assumes full responsibility for
determining the suitability of the HeadMouse Nano for the intended application.
HeadMouse Nano User Guide
Origin Instruments Corporation Page 5
Introduction
This manual is a guide to the operation and use of this head­controlled computer access system. Additional documentation may be shipped with your HeadMouse Nano.
HeadMouse Nano Key Features
Fast and responsive cursor control  Low power consumption  USB mouse interface  Bus powered: No power cable needed  Pocket sized  Automatically adapts to any mounting angle  Standard 3.5mm input for one or two wired switches  Built-in receiver for up to three wireless switches  Mounting for laptops, tablets, desktops, and augmentative
communication devices
Two-year warranty  Origin Instruments' quality, reliability and support
HeadMouse Nano User Guide
Origin Instruments Corporation Page 6
Hardware Description
The HeadMouse Nano is an infrared optical sensor that tracks side-to-side and up-and-down head movements. It then filters and transforms these movements to control the mouse pointer position on a computer, tablet or communication device screen. HeadMouse Nano is a modest power device and is usually supplied directly from the device USB port. HeadMouse Nano uses infrared light to track a tiny reflective dot that is placed on the user's forehead or glasses.
When used with mouse utility software, such as Origin Instruments' Dragger, mouse clicks are performed by positioning the mouse pointer and dwelling for a selectable period of time. Alternately, mouse clicks can be performed with an adaptive switch, such as the Origin Instruments Sip/Puff Switch or Orby switches. One or two industry standard adaptive switches can be connected directly to HeadMouse Nano through a 3.5 mm stereo jack located next to the USB connector.
The HeadMouse Nano also contains an integrated infrared receiver for use with wireless switches. The optional Beam wireless switch transmitter supports wireless connections for up to three adaptive switches.
HeadMouse Nano is connected to the computer, tablet or augmentative communication device with a standard A, to micro-B USB cable.
HeadMouse Nano User Guide
Origin Instruments Corporation Page 7
Figure 1: HeadMouse Nano Front Panel. Optical tracking sensor in the middle, infrared receiver for available Beam on the left and status LED on
the right.
The aluminum body of the HeadMouse Nano measures 2.1- by
1.5- by 0.35-inches, the optical transceiver extends another 0.15­inches. For best results and reliable long-term operation, do not touch the dark window. It is not necessary to clean the window as part of a regular maintenance program.
A red and green LED is located on one side of the optical transceiver. These LEDs indicate tracking status. The red LED indicates that search is in progress. The green LED indicates the HeadMouse has found and is tracking a target.
An infrared receiver for wireless switches is located on the other side of the optical transceiver. Direct the optional Beam wireless switch transmitter toward this receiver to communicate with the HeadMouse Nano.
HeadMouse Nano User Guide
Origin Instruments Corporation Page 8
Figure 2: HeadMouse Nano Top View. USB Micro-B in the middle, and
3.5-mm jack for one or two adaptive switches.
Located on the top edge of the HeadMouse Nano are a Micro-B USB connector and a 3.5mm (1/8-inch) stereo microphone connector. Connect a mono adaptive switch into the microphone connector to provide a LEFT mouse button click. A dual-mono-to­stereo adapter is available if you need to directly connect mono adaptive switches for both LEFT and RIGHT mouse button clicks.
The HeadMouse Nano draws its operating power directly from the computer, tablet or AAC device through the USB connector.
Loading...
+ 16 hidden pages