Origin LS44, LS64, LS64S, OSUB8, OSUB10 Installation Manual

Installation Manual

Landscape Collection

Models:

LS44
LS64
LS64S
OSUB8
OSUB10
OSUB12

1

844·674·4461

[e-mail]

WWW.ORIGINACOUSTICS.COM

LANDSCAPE INSTALLATION MANUAL

Table of Contents

Introduction 1
Installation Requirements and Recommendations 2

What’s Included 2
Required Tools/Items 2

Planning 3

Satellite Speaker Location 3
Subwoofer Location 3
Wiring Plan 5

Installation 6

Satellite Speakers 6
Subwoofer 7
Wiring 8

Troubleshooting 10
Technical Assistance 11
Specifications 13
Warranty 16

Limited Lifetime Warranty 16
Requirements and Warranty Coverage 17
Return Process 17

Introduction

Thank you for purchasing the Origin Seasons Landscape Sys­tem. You are about to enjoy an incredible listening experience
created specifically for outdoor environments. Origin engineers
have invested countless hours creating loudspeakers that deliver
amazing sonic performance from enclosures that can withstand
the harshest elements.

The Landscape System can include multiple mid/high frequency
satellites and dedicated subwoofers depending on the specific
application and system design. Every speaker is designed to at­tach to either a 70v amplifier or a standard receiver depending on
the models selected.

This instruction booklet covers the necessary information for the
installation of your Landscape System, including: step-by-step
instructions, troubleshooting tips for any errors that may occur,
and all warranty information. If for any rea son you experience
problems, or if you have installation questions, please call us at
[phone]. Hours of operation are 8:00am to 5:00pm (Pacific
Time), Monday through Friday.

2 3

844·674·4461

[e-mail]

WWW.ORIGINACOUSTICS.COM

LANDSCAPE INSTALLATION MANUAL

Planning

The Landscape satellite speakers and subwoofers should be
strategically placed to evenly distribute sound throughout the
outdoor area. Fully plan out the locations of all satellite speakers,
subwoofers, and buried wires before beginning the installation
process.

Origin satellite speakers have been specially designed so that you
can set them in the 70v configuration for large installs, or for small
installs they can be set to 8ohm for use with a standard AV receiv­er. (For 8ohm configurations, the OSUB8 is the only subwoofer
that should be used.)

Satellite Speaker Location

Evenly space the satellite speakers so that they’re facing the lis­tening area. It’s acceptable to use both high and low locations for
the satellite speakers. One satellite speaker will provide sound to
about 250 2.

Use the appropriate mount for the satellite speakers depending
on their location. Mounting options include tree mounts, spikes
for locations on the ground, and surface mounts for walls or other
flat surfaces.

Avoid placing them next to high-pressure sprinklers.

Subwoofer Location

Select a location for the subwoofer outside the listening area in
about the middle of the satellite speaker arrangement. One sub­woofer will provide bass to about 2000 2. If you’re using multiple
subwoofers, space them out evenly and about equal-distance
from the listening area. Try to position the subwoofer(s) away
from standing water locations.

What’s Included

• Silicone filled wire nuts (x2)

• Silicone filled wire nuts (x4)
(LS64S)

Required Tools/Items

• Direct burial wire

• Wire cutters

• Wire stripper

• Shovel

• Philip’s head and flat head
screwdrivers

Installation Requirements

and Recommendations

For this setup, use a direct burial multi-stranded wiring designed for
amplifier to speaker connections. The gauge of wire used can have an
impact on the performance of your speakers and we would recommend
that you choose the largest wire size that is practical for your installation.
Which gauge to select depends on
the length of wire to be used on any
particular speaker. In general the
shorter the run the smaller the wire
size you can use, however you can
never go wrong by using a thicker
gauge.

Speaker Wire Recommendations

Wire Length
(Feet)

Recommended
Gauge

0 - 150 14

100 + 12

4 5

844·674·4461

[e-mail]

WWW.ORIGINACOUSTICS.COM

LANDSCAPE INSTALLATION MANUAL

Wiring Plan

When wiring, the satellite speakers and subwoofer(s) will be
daisy-chained together (in parallel) using two channels: a le
channel and a right channel. We recommend running the le
and right channel wires next to each other in the same trench,
and alternating which wire is connected to each satellite speaker

Amplifier

Channel 1
Channel 2

Another option is to put the subwoofer(s) on one channel and the
satellite speakers on another. If you’re doing this, you’ll want set
the amplifier output to mono instead of stereo for your satellite
speakers. Refer to the amplifier manual for these settings.

Patio

(Listening Area)

Subwoofer

Satellite speakers

Amplifier

Channel 1
Channel 2

Layout Example

for even sound dispersal. The subwoofer(s) can be connected to
either channel anywhere in the chain. When using more than one
subwoofer, evenly distribute them between the two channels.

Small System Option:
For a smaller system, it’s possible to use an ordinary receiver. This
option is only available if you’re using the OSUB8, and no more
than two speakers per channel. All speakers and subwoofers
must be set to 8ohm.

6 7

844·674·4461

[e-mail]

WWW.ORIGINACOUSTICS.COM

LANDSCAPE INSTALLATION MANUAL

Installation

Satellite Speakers

Install the satellite speakers with their mounts. (Depending on the
location and type of mount, you may want to connect the wires to
the satellite speakers first.)

To aim the satellite speaker up and down, loosen the screw on the
pole until the satellite speaker can be aimed, and then tighten it
when it’s facing the appropriate direction. To prevent water dam­age, angle the satellite speaker less than 45 degrees up.

To aim the satellite speakers side to side on the tree or surface
mount, the satellite speaker first should be screwed fully to the
mount. Then, loosen it until it’s facing the right direction. Move
the bolt just until it’s snug against the mount.

The rear cover on the satellite speaker can be removed to adjust
the wattage taps when using a 70v amplifier. The wattage level
is used to adjust the volume. Do not set it to 8ohm unless you’re
planning on using two satellite speakers (or less) per channel.

To remove the back cover and access the wattage controls, un­screw the knob on the back. Then the back panel can be removed.
When reattaching the back panel, make sure it’s oriented proper­ly, or it may not fit.

Subwoofer

When you’ve decided on a subwoofer location, you’re ready to dig
a hole. Refer to the following dimensions to determine the size of
the hole:

OSUB8: 16” diameter, 14” deep
OSUB10: 20” diameter, 18” deep
OSUB12: 22” diameter, 18” deep

Use loose dirt to pad the area around where the subwoofer will
be. The subwoofer shouldn’t be in contact with large rocks or
large empty holes.

Using the pipe clamp, attach the pipe to the subwoofer.

Do not li the subwoofer by holding the port tube as this could
damage the subwoofer. We’ve provided straps on the subwoofer
to help li and lower it into hole. Arrange is so when it’s buried,
the bottom of the cap is about 4” above the ground.

8 9

844·674·4461

[e-mail]

WWW.ORIGINACOUSTICS.COM

LANDSCAPE INSTALLATION MANUAL

Bundle all three of the positive wires (the wire from the amplifier,
the wire to the first satellite speaker, and the wire to the rest of the
satellite speakers) together and connect them with the first wire
nut. Then do the same for all the negative wires.

You will need a wire that has at least two conductors; one that can be
identified as the positive and the other as the negative. All two conductor
wires have some means of identifying which conductor is which, but at
times this identification may be subtle. It’s crucial that you keep track
of which wire you use for positive (+) and negative (-). Typically if the
wires are colored red and black, the red wire is used for positive and the
black wire is used for negative. You can choose whichever color of wire
you want to be positive and negative as long as you remain consistent
throughout the install.

On both your amplifier and your satellite speaker the connectors will be
identified as red for positive and black for negative. It is very important to
look carefully at the speaker wires and be certain that the same wire that
is attached to the positive connector in the amplifier is attached to the
positive connector in the speaker.

About Speaker Wire

Wiring

Dig a 5” trench where you plan on laying out the wire. Run the
wire from the amplifier to your first satellite speaker location.

Using waterproof wire nuts (included), connect the wire to the
first satellite speaker or subwoofer, using the following diagram
as reference:

To Satellite

Speaker

From

Amplifier

To Remaining

Speakers

DO NOT connect the amplifier to AC power before all the satellite speakers
and subwoofer are connected. DO NOT connect the satellite speaker wire
to the amplifier before all other connections have been made. Failure to
do so may create a shock hazard. DO NOT let any stray (+) and (-) strands
to come in contact with each other. This could damage your amplifier.

WARNING

Continue connecting the satellite speakers and subwoofer(s) to­gether like this. The final satellite speaker or subwoofer will be
at the end of the chain, so you’ll only need to bundle two wires
together. Alternatively, if you want to wire satellite speakers on
one channel and subwoofers on the other, you can use a Crown
amplifier with Origin’s custom DSP for landscape speakers. For
more information, please look at the Instructions and Datasheets
section on our website.

If a satellite speaker is located far from the main wire in the trench,
you may need to use an additional length of wire between the
satellite speaker and trench. This situation is most likely to occur
if the satellite speaker is in a tree or on a wall.

Connect the wires to the amplifier.

Connect your music playing device and test the system. If every­thing is working properly, fill all the holes and trenches.

10 11

844·674·4461

TECHSUPPORTORIGINACOUSTICS.COM

WWW.ORIGINACOUSTICS.COM

LANDSCAPE INSTALLATION MANUAL

If you have any questions or concerns about installing or using
this product, you can reach us through one of the following meth­ods:

Phone: [phone]
Hours of operation: 8:00am - 5:00pm (Pacific Time), Mon - Fri
Email: [e-mail]

If you are having technical trouble, please include the model
number and briefly explain what steps you took to resolve the
problem in your email or be prepared to answer these questions
over the phone. If you are considering returning the product, it’s
required that you contact Origin Acoustics prior to any return at­tempts. This way we can determine if the issue can be resolved
without returning the product or, if needed, we can provide in­structions and support for the return process.

If possible, it’s oen good to try to isolate the problem first. For
example, if you’re playing a DVD on a television and there’s no
sound, try connecting an MP3 player to the system to see if that
works. If it does work, then the problem is with the television, DVD
player, or the cables connecting them. If it doesn’t work, the prob­lem will be with the amplifier, speakers, or those cables.

Problem Possible Cause

No Sound

The volume may be turned down or muted. Check the volume
settings on both the amplifier and the television/computer/CD
player/etc.

Make sure the proper source is selected on the amplifier or
receiver.

Check the cord connecting the amplifier with the source. The
cord may be damaged or plugged into the wrong input or out­put.

Check the wires connecting the amplifier with the satellite
speakers. Make sure they’re connected properly and not dam­aged in any way.

Poor Sound Quality

Check to make sure all your satellites and amplifier are set to
the appropriate setting. 70v or when using 2 satellite speakers
ONLY per channel, 8ohm

If you hear something like static, or the sound is cutting in and
out, check the audio cables. If the problem increases when a
cable is being moved, then the cable is most likely faulty or not
connected properly.

Today’s audio systems may have several places to adjust the
volume, for example your MP3 player may have a volume con­trol, and your amplifier may also have one. Check to be certain
that the volume isn’t turned up past 80% on any device.

Try changing sources to be certain that the selection you’ve
chosen is a good quality recording.

Technical AssistanceTroubleshooting

12 13

844·674·4461

[e-mail]

WWW.ORIGINACOUSTICS.COM

LANDSCAPE INSTALLATION MANUAL

Specifications

Model Number LS44 LS64 LS64S OSUB8 OSUB10 OSUB12

Part Number OLS4400 OLS6600 OLS6600S OSUB8000 OSUB10000 OSUB12000

Tweeter Dome Titanium Titanium Titanium N/A N/A N /A

Tweeter Diameter 0.75” (20mm) 1” (25mm) 1” (25mm) N/A N/A N/A

Woofer Cone

Injection molded
polypropylene

Injection molded
polypropylene

Injection molded
polypropylene

Polypropylene Polypropylene Polypropylene

Woofer Diameter 4.5” (114mm) 6” (152mm) 6” (152mm) 8” (203mm) 10” (254mm) 12” (305mm)

Frequency Response 80Hz - 20KHz ±3dB 60Hz - 20KHz ±3dB 60Hz - 20KHz ±3dB 39Hz - 100Hz ± 3dB 32Hz – 100Hz ±3dB 23Hz – 100Hz ±3dB

Transformer 70v or 8ohm 70v or 8ohm 70v or 8ohm 70v or 8ohm 70v 70v

Wattage Taps

30w, 15w, 7.5w,

3.75w, 8ohm

50w, 25w, 12.5w,

6.75w, 8ohm

50w, 25w, 12.5w,

6.75w, 8ohm

N/A N /A N/A

Enclosure PolyComposite, weather and UV resistant enclosure

Size (WxHxD)

5.25x8.75x8.25”
(134x221x210mm)

7x10x11”
(179x255x280mm)

7x10x11”
(179x255x280mm)

12.5x21.25x12.5”
(315x538x315mm)

15.75x21.5x15.75”
(400x543x400mm)

17.75x23.5x17.75”
(450x598x450mm)

14 15

844·674·4461

[e-mail]

WWW.ORIGINACOUSTICS.COM

LANDSCAPE INSTALLATION MANUAL

7.04

178.8

11.02
280

10.06

255.4

8.27
210

5.29

134.4

8.71

221.2

8.9in

225mm

8.0in

203mm

21.2in

538mm

4.3in

110mm

9.8in
250mm

12.4in
315mm

9.1in

230mm

8.0in

203mm

21.4in

543mm

4.3in

110mm

15.7in

400mm

9.8in
250mm

11.8in

299mm

7.4in

189mm

23.5in

598mm

4.3in

110mm

17.7in

450mm

9.8in
250mm

LS44

LS64
LS64S

OSUB8

OSUB10

OSUB12

16 17

844·674·4461

[e-mail]

WWW.ORIGINACOUSTICS.COM

LANDSCAPE INSTALLATION MANUAL

This warranty may not be valid if the product was purchased
through an unauthorized dealer. This warranty only applies to
the individual that made the original purchase, and it cannot be
applied to other purchases. The purchaser must be prepared to
provide proof of purchase (receipt). This warranty will not be val­id if the identifying number or serial number has been removed,
defaced, or altered.

This warranty does not cover the following:

• Accidental damage

• Damage caused by abuse or misuse

• Damage caused by attempted repairs/modifications by
anyone other than Origin Acoustics or an authorized dealer

• Damage caused by improper installation

• Normal wear, maintenance, and environmental issues

• Damage inflicted during the return shipment

Origin Acoustics warrants to the original retail purchaser only that
this Origin Acoustics product will be free from defects in materials
and workmanship, provided the speaker was purchased from an
Origin Acoustics authorized dealer.

If the product is determined to be defective, it will be repaired or
replaced at Origin Acoustics’ discretion. If the product must be
replaced yet it is no longer manufactured, it will be replaced with
a model of equal to or greater value that is the most similar to
the original. If this is the case, installing the replacement model
may require mounting modifications; Origin Acoustics will not be
responsible for any such related costs.

Before making any return attempts, it is required that you first
contact Origin Acoustics. Return product to Origin Acoustics
or your dealer, either in person or by mail. It’s preferable if the
product is returned in the original packaging. If this isn’t possible,
the customer is responsible for insuring the shipment for the full
value of the product.

This warranty is in lieu of all other expressed or implied warranties.
Some states do not allow limitations on implied warranties, so this
may not apply depending on the customer’s location. (For more
information, see Magnuson-Moss Warranty Act.)

Return Process

Requirements and Warranty Coverage

Limited Lifetime Warranty

Warranty

©2014 Origin Acoustics. All copyrighted, trademarked and
patented elements mentioned herein are the sole property of

Origin Acoustics.