Instruction manual
Digital Camera
& Photo Designer CD ROM
Ages 8+
Dear Parent/Guardian
Thank you for choosing the Barbie™ Digital Camera.
Designed and engineered with extreme precision, the Barbie™ Digital Camera is
packed with an awesome Barbie™ Photo Designer CD-ROM.
You can take a maximum of 208 digital pictures (320 X 240 pixels with compression),
save your memories, record cool video clips and use it as a web cam.
The Barbie™ Photo Designer CD-ROM provides loads of photo fun. You can get
creative and decorate your own photos with fun frames, greeting cards, cool
calendars and much more!
Parents, we recommend helping your child with their Barbie™ Digital Camera. This
manual is designed using technical information in order to allow you to achieve the best
results. Some children will need your guidance setting up, learning and understanding
how to use the different aspects of the camera and software.
Your use of the BarbieTMPhoto Designer CD-ROM is subject to a License Agreement contained inside the CD.
BARBIE and associated trademarks and trade dress are owned by, and used under license from, Mattel, Inc.
© 2006 Mattel, Inc.All Rights Reserved.
Barbie™ Digital Camera & Photo Designer CD-ROM
I Camera Precautions 1
II Technical Specifications 1
III Computer System Requirements 2
IV Camera Description 2
V Quick Start 3
• Battery Installation 3
• Power On/ Off 3~4
• Taking Photos 4
VI Camera Mode Selections 5~9
VII Download Images and Movie Clips 10
VIII Web Cam mode 11
IX Welcome to PhotoImpression 12
• System Requirements 12
•
Installing ArcSoft PhotoImpression and the Camera Driver
12
B) Technical Specifications
3 in 1 Digital Camera: Digital Still Camera
Video Capturing
Conferencing (Web Cam)
104 images (w/o compression)
Image Sensor: CMOS Sensor
Resolution: VGA 640x480 Pixels
QVGA 320x240 Pixels
Color: 24 bits
Lens: Fixed Focus=6.2mm F/2.5
Capture Range: 0.6mm~infinity
Memory: Built-in 8MB SDRAM
Capacity: 60-150 pictures (compressed VGA)
25 pictures (VGA 640x480)
240-410 pictures (compressed QVGA)
102 pictures (QVGA 320x240)
Power: 1 AAAAlkaline Battery
Computer: USB1.1
Note: The quantity of compressed picture is various and
depending on the scene complexity.
1
A) Camera Precautions
Notice the following guidelines when using your camera.
• Do not place this camera in a damp or dusty location. This may cause a fire or an electrical shock.
• Do not leave this camera in places subject to extremely high temperatures, such as in direct sunlight.
This may affect the camera case and internal components.
• Do not bump or give shock when the camera is activated. This may cause the camera to malfunction.
• Choose a flat surface free from vibration to store the camera.
• When the lens or the viewfinder is dirty, please clean them with a lens brush or soft cloth.
• Under the following circumstances, have the camera repaired by qualified personnel.
a) The cable or plug is damaged or worn.
b) The device has been dropped and/or the casing has been damaged.
c) Liquid has entered the camera.
C) Computer System Requirements (Children should ask for section.)
• Personal computer designed for Win98SE/2000/ME/XP
• A CD-ROM drive to install software, min. 200 MHz microprocessor
• Available USB port
• Color display monitor with a minimum resolution of 800 x 600 24 bits or above
• Hard disk space with a minimum of 200MB or above
D) Functional Parts of the Camera
2
Shutter button
Viewfinder
Lens
USB
Battery Door
Mode button
E) Quick Start
Battery Installation
1. On the back of the camera to the right side slide the panel to you right.
2. Insert Two AAA alkaline batteries into battery compartment.
3. Replace the cover.
Always download photos to PC prior to your replacing batteries to avoid
memory loss.
Note:
a) Do not mix old and new batteries together. Replace all the
batteries at once.
b) Remove the batteries if the camera is not going to be used for
some time. This will save the battery life.
c) Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries
d) Battery installation - should operate under adult supervision.
Note:
When the battery is low and needs to be replaced the LCD screen will
blink as a warning.
Power on/off
Power On
Method 1
Turn the camera on by pressing MODE button.
Method 2
Plug in the USB cable and connect it with your PC and the camera will
be powered by USB power source.
Note:
Before using the PC-Cam function, please download all photos from your
camera to your computer to avoid photos missing.
3
Loading...