Barbie
™
-On the Go Learning Phone
Dear Parent/Guardian
Thank you for choosing the Barbie
™
-On the Go
Learning Phone. Designed with fun in mind, the -On
the Go Learning Phone is packed full of learning,
offering stimulating games and activities that make an
invaluable contribution to your child’s development. The
activities to further your child’s skills cover vocabulary,
memory, the alphabet, logic, counting and melodies. The
Barbie
™
-On the Go Learning Phone encourages
independent learning and creativity. Learning with
Barbie®is so much fun!
About Your -On the Go Learning
Phone
The Barbie
™
-On the Go
Learning Phone is
supplied with the
following parts,
please contact your
retailer if any parts
are missing:
LCD
Screen
Awesome digital
sound!
Phone
charm
Cursor
Buttons
On/Off Key
Number
Keypad
Getting Started
Your Barbie
™
-On the Go Learning Phone operates on
1 CR2032 battery (included).
Battery Installation
1) Make sure the unit is turned off.
2) Using a small screwdriver slide
back the locking catch. Tip the
unit and the battery cover will
drop out. It may require
assitance from a fingernail.
3) Insert the CR2032 battery,
taking careful note of the correct
polarity. Try not to handle the
battery too much.
4) Replace the cover and slide the
locking catch back with a small
screwdriver.
Caution
• Only use batteries of the same or equivalent type.
(CR2032)
• Remove batteries from the unit if the unit is not going
to be used for a long time.
• Remove all batteries when replacing.
• Do not dispose of batteries in fire.
• Non-rechargeable batteries are not to be recharged.
¥ Rechargeable batteries are to be removed from the toy
before being charged.
• Rechargeable batteries are only to be charged under
adult supervision.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
Cleaning and Maintenance
The unit should be regularly examined for damage to the
enclosure and other parts. In the event of such damage
the unit must not be used until the damage has been
repaired. Always disconnect the power supply and/or
remove the batteries before cleaning. Wipe the unit with
a dry cloth.
• Do not get the unit wet.
• Do not dismantle the unit.
Auto-off
If there is no input on the unit for 5
minutes the unit will automatically say
goodbye and turn itself off to conserve
power. When you are ready to start playing
again just press the On/Off button to turn
the unit back on.
Blackout Screen or Abnormal Display
Reset the unit by pushing the reset button located on the
back of the unit. Use a pencil to do this.
Starting the Barbie
™
-On the Go
Learning Phone
On/Off