Page 1
Mechanical characteristics
Part number
WGH100-SE-HP
Dimensions
L
W
H
780 mm
587 mm
205 mm
Weigth (approx.)
9 Kg
Material
Aluminum Alloy
Treatment
Alodine
(1)
1200
Color
Satimo Blue / Army green (RAL6003)
Mounting interface
Horizontal or Vertical Mounting
Vibration and shock
resistance
Compliant to MIL-STD-810C (514.2
and 512.6)
Typical operating
temperature
0°C to 45°C
Typical storage
temperature
0°C to 60°C
Mechanical drawing
Interface drawing
Electrical characteristics
Part number
WGH100-SE-HP
Antenna Type
High-power Wideband Sectorial Horn
Antenna
Frequency Range
1 – 2.5 GHz
Polarization
Single Linear
Gain
(1)
10 – 15 dBi
HPBW (2x)
E-plane
H-plane
34 – 13 deg.
90 – 64 deg.
Return loss
< -9 dB
(2)
VSWR
< 2.2
(2)
Max Input Power (CW)
3 kW
(3)
Input Interface
EIA 1-5/8” Female connector
High-Power Wideband Sectorial Horn Antenna [1-2.5]GHz
WGH100-SE-HP
(1) Realized antenna gain as defined in [IEEE Standard Test Procedures for
Antennas, ANSI/IEEE Std 149-1979]
(2) Referred to 50 Ohms
(3) 40°C, Matched Load, Sea Level
(1) Equivalent to MIL-C5541 E class 3
SATIMO Italy – Via dei Castelli Romani, 59 – 00040 Pomezia (Rome), ITALY
Tel: +39 06 89 99 53 11 Fax: +39 06 89 99 53 24
www.satimo.com
Page 2
Mechanical characteristics
Part number
WGH100-HP
Dimensions
L
W
H
721 mm
310 mm
228 mm
Weigth (approx.)
6.5 Kg
Material
Aluminum Alloy
Treatment
Alodine
(1)
1200
Color
Satimo Blue / Army green (RAL6003)
Mounting interface
Horizontal or Vertical Mounting
Vibration and shock
resistance
Compliant to MIL-STD-810C (514.2
and 512.6)
Typical operating
temperature
0°C to 45°C
Typical storage
temperature
0°C to 60°C
Mechanical drawing
Interface drawing
Electrical characteristics
Part number
WGH100-HP
Antenna Type
High-power Wideband Horn Antenna
Frequency Range
1 – 2.5 GHz
Polarization
Single Linear
Gain
(1)
8 – 15 dBi
HPBW (2x)
E-plane
H-plane
60 – 30 deg.
80 – 30 deg.
Return loss
< -9 dB
(2)
VSWR
< 2.2
(2)
Max Input Power (CW)
3 kW
(3)
Input Interface
EIA 1-5/8” Female connector
High-Power Wideband Horn Antenna [1-2.5]GHz
WGH100-HP
(1) Realized antenna gain as defined in [IEEE Standard Test Procedures for
Antennas, ANSI/IEEE Std 149-1979]
(2) Referred to 50 Ohms
(3) 40°C, Matched Load, Sea Level
(1) Equivalent to MIL-C5541 E class 3
SATIMO Italy – Via dei Castelli Romani, 59 – 00040 Pomezia (Rome), ITALY
Tel: +39 06 89 99 53 11 Fax: +39 06 89 99 53 24
www.satimo.com
Page 3
Mechanical characteristics
Part number
WGH250-HP
Dimensions
L
W
H
460 mm
114 mm
147 mm
Weigth (approx.)
1.7 Kg
Material
Aluminum Alloy
Treatment
Alodine
(1)
1200
Color
Satimo Blue / Army green (RAL6003)
Mounting interface
Horizontal or Vertical Mounting
Vibration and shock
resistance
Compliant to MIL-STD-810C (514.2
and 512.6)
Typical operating
temperature
0°C to 45°C
Typical storage
temperature
0°C to 60°C
Mechanical drawing
Interface drawing
Electrical characteristics
Part number
WGH250-HP
Antenna Type
High-power Wideband Horn Antenna
Frequency Range
2.5 – 7.5 GHz
Polarization
Single Linear
Gain
(1)
10.5 – 20 dBi
HPBW (2x)
E-plane
H-plane
55 – 18 deg.
55 – 18 deg.
Return loss
< -15 dB
(2)
VSWR
< 1.43
(2)
Max Input Power (CW)
3 kW
(3)
Input Interface
WRD250 waveguide flange
High-Power Wideband Horn Antenna [2.5-7.5]GHz
WGH250-HP
(1) Realized antenna gain as defined in [IEEE Standard Test Procedures for
Antennas, ANSI/IEEE Std 149-1979]
(2) Referred to the impedance of the fundamental mode of the WRD250
waveguide flange
(3) 40°C, Matched Load, Sea Level
(1) Equivalent to MIL-C5541 E class 3
SATIMO Italy – Via dei Castelli Romani, 59 – 00040 Pomezia (Rome), ITALY
Tel: +39 06 89 99 53 11 Fax: +39 06 89 99 53 24
www.satimo.com
Page 4
Mechanical characteristics
Part number
WGH750-HP
Dimensions
L
W
H
352 mm
148 mm
184 mm
Weigth (approx.)
1.2 Kg
Material
Aluminum Alloy
Treatment
Alodine
(1)
1200
Color
Satimo Blue / Army green (RAL6003)
Mounting interface
Horizontal or Vertical Mounting
Vibration and shock
resistance
Compliant to MIL-STD-810C (514.2
and 512.6)
Typical operating
temperature
0°C to 45°C
Typical storage
temperature
0°C to 60°C
Mechanical drawing
Interface drawing
Electrical characteristics
Part number
WGH750-HP
Antenna Type
High-power Wideband Horn Antenna
Frequency Range
7.5 – 18 GHz
Polarization
Single Linear
Gain
(1)
20 – 22 dBi
HPBW (2x)
E-plane
H-plane
> 12 deg.
> 12 deg.
Return loss
< -25 dB
(2)
VSWR
< 1.12
(2)
Max Input Power (CW)
3 kW
(3)
Input Interface
WRD750 waveguide flange
High-Power Wideband Horn Antenna [7.5-18]GHz
WGH750-HP
(1) Realized antenna gain as defined in [IEEE Standard Test Procedures for
Antennas, ANSI/IEEE Std 149-1979]
(2) Referred to the impedance of the fundamental mode of WRD750
waveguide flange
(3) 40°C, Matched Load, Sea Level
(1) Equivalent to MIL-C5541 E class 3
SATIMO Italy – Via dei Castelli Romani, 59 – 00040 Pomezia (Rome), ITALY
Tel: +39 06 89 99 53 11 Fax: +39 06 89 99 53 24
www.satimo.com
Loading...