Orbita AVANTI 24, AVANTI 36, AVANTI 48 Instruction Manual

INSTRUCTION GUIDE

AVANTI 24, 36 or 48

Watchwinder

Made in USA

6740 Netherlands Drive Suite D

Wilmington, NC 28405

www.orbita.com

Revised July 2015

Customer Support

Email

[e-mail]

Phone / Fax

910-256-5300 / 910-256-5356

Toll Free

800-800-4436

Online

www.orbita.com

Cushions

We have smaller and larger size cushions available for purchase direct from our
Eboutique at: http://store.orbita.com, or call our toll free number: 800-800-4436
and we will be happy to assist you.

Orbita Guarantee/Warranty

Orbita watchwinders carry an iron-clad 2-year product guarantee,
with the option to purchase an additional 3-year Extended
Warranty (must be purchased within 30 days of original
purchase).

Congratulations!

This user guide will help take you through the intial set up and

automatic watches require between 600 and 800 turns per day
(TPD), whether worn on your wrist or turning on your watch
winder.

1

2 3 4

1

2 3 4

Turning Power On

1. Carefully unwrap the protective packaging.

2. Remove the key that is taped to the glass door.

3. Unlock and open the doors.

4. Select the programmable setting on each module. (Details below)

5. Mount watch on cushion and slide cushion into cup.

6. Slide the cup back on to the drive shaft making sure it is fully engaged.

7. Turn the power on using master power switch(es) (o/-).

Getting Started - Rotorwind 10/15 Minute Switch

Avanti 48 Watchwinder

Getting Started - Programmable

-

15

10

A program switch allows you to select one of two winding
cycles: 8 minute (standard program) or 12 minute (extended
program). The winding cycle begins every 8 or 12 minutes
based on the program selected. Many watches that wind in
both directions stay fully wound on the factory preset 8 min.
setting.
To set the extended program, remove the mounting cup to
reveal the program switch opening. Insert a small object
(screwdriver, pencil, etc.) into the opening and slide the switch
to the 12 minute setting.
The factory preset is the 8 minute setting.

Mounting Watch on Cushion

1. With the bracelet or strap of the watch closed, squeeze and slide the
cushion through the watch. The back of the watch should rest against the
Orbita logo and the strap should lie on the flat portion of the cushion .

1

2

3 4

12

8

Visit our watch database: www.orbita.comVisit our watch database: www.orbita.com

OPERATING OPERATING

MODE MODE

Clockwise Clockwise

Counterclockwise Counterclockwise

ReversingReversing

Pause IntervalsPause Intervals

11 22 33 44 11 22 33 44 11 22 33 44

11 22 33 44

11 22 33 44

11 22 33 44 11 22 33 44 11 22 33 44

11 22 33 44

11 22 33 44

11 22 33 44 11 22 33 44 11 22 33 44

11 22 33 44

650

TPDTPD

31 minutes 25 minutes 21 minutes

12 minutes

15 minutes15 minutes

800

TPDTPD

950

TPDTPD

1600

TPDTPD

1300

TPD

1300

TPD

Programming Settings (TPD = Turns Per Day)