Orbit OBR8718 Owner's Manual

2

IMPORTANT SAFETY NOTICE

★Note the following precautions before assembling or operating the

machine.

01. Assemble the machine exactly as described in the instruction manual.

02. Check all the screws, nuts and other connections before using the machine, only
exercise on the machine when it is in correct working order. Ensure that all users
are adequately informed of all precautions.

03. Set up the machine in a dry level place and away from moisture and water;
before beginning exercise, remove all objects within a radius of 2 meters from
the machine.

04. Place a suitable base (e.g. rubber mat, wooden board etc.) beneath the machine
while assembling or exercising to avoid scratching, dirt and etc.

05. Do not use aggressive cleaning agents to clean the machine, remove drops of
sweat from the machine immediately after finishing exercising.

06. Only use the supplied tools or suitable tools of your own to assemble the
machine or repair any parts of machine, use only original spare parts for any
necessary repairs.

07. Your health can be affected by incorrect or excessive exercising. Before
beginning this or any exercise program, consult your doctor. This is especially
important for people over the age of 35 or those with pre-existing health
problems.

08. This machine is intended for home use only, not suitable for commercial purpose.

09. Wear appropriate clothes and athletic shoes when exercising.

10. If you have a feeling of dizziness, sickness or other abnormal symptoms, please
stop immediately and consult your doctor.

11. The maximum user’s weight is 120KGS.

3

EXPLOADED DIAGRAM

4

5

PARTS LIST

Part No. Description Qty Part No. Description Qty

1 Main frame 1 54 Seat 1
2 Front stabilizer 1 55 Adapter 1

3 Rear stabilizer 1 56 Crank Cover 2
4 Handlebar post 1 57 Flange bolt 2
5 Fixed handlebar 1 58L/R Chain cover 1pr.
6 Nylon nut M8 2 59 Hex nut 2
7 Flat washer D8xΦ16x1.5 6 60 Adjusting bolt 2
8 Roller 2 61 U-shape washer 2

9 Inner hexagon bolt M8x40xL12 2 62 Hex nut 2
10 End cap 2 63 Nut 2
11 Hex nut M10 5 64 Bushing 2
12 Adjusting pad 5 65 Cone bushing 1
13 Inner hexagon bolt M8xL58 4 66 Flywheel axle 1
14 Spring washer D8 8 67 Flywheel 1
15 Arc washer d8x2xΦ25xR39 4 68 Motor 1
16 End cap 2 69 Spring washer 1

17L/R Crank 1 pr. 70 Bearing 2
18L/R Pedal 1 pr. 71 Inner hexagon bolt 3

19 Inner hexagon bolt M8x15 8 72 Belt wheel 1
20 Arc washer d8xR20 2 73 Mid-axle 1
21 Sensor wire 1 74 Belt 1
22 Extension wire 1 75 Small belt wheel 1

23L/R Protective guard 1 pr. 76 Sensor 1

24 Screw 34 77 Cushion 2

25a/b Protective guard 1 pr. 78L/R Track Cover 1pr.

26 Inner hexagon bolt M8x90 2 79 Square End cap 1 1
27

lifting handle

1 80 Square End cap 2 1
28 Inner hexagon bolt M8x12 16 81 Hex bolt 1
29 Backrest 1 82 Hex nut 2
30 Round end cap 1 83 Hex bolt 2
31 Screw 1 84 Spring washer 2
32 Plastic handle knob 1 85 Flat washer 2
33 Spacer 1 86 Spring washer 2
34 Flat washer 1 87 Tension spring 1
35 Foam grip 2 88 Magnetic holder 1
36 Extension pulse wire 1 2 89 Magnet 10
37 Extension pulse wire 2 2 90 Magnetic holder axle 1
38 Computer 1 91 Nylon nut 4
39 eccentric shaft 1 92 Roller 4
40 Inner hexagon bolt M6x10 4 93 Bushing 4
41 Handle 1 94 Inner hexagon bolt 4
42 Foam grip 1 95 Seat holder 1
43 Flat washer D8xΦ19x1.5 12 96 Spring washer 1
44 Extension pulse wire 3 2 97 Alloy bushing 1
45 Pulse wire 2 98 Handle holder 1
46 Fixed bracket 1 99 Alloy bushing 1
47 Protective guard 1 100 Upper press block 1