Orbit OBKB01 Owner's Manual

Owner's manual

OBKB01

CAUTION: 1. Weight on this product should not exceed 150kg

2 Exercise of a strenuous nature, as is customarily done on this equipment,

Should not be undertaken without first consulting a physician.
No specific health claims are made or implied as they relate to the equipment.
Measurements made by the equipment are believed to be accurate, but only the
measurements of your physician should be relied upon.

IMPORTANT: Read all instruction carefully before using this product. Retain this product owner's

manual for future reference.

•

Warranty

• Assembly

• Parts

OBKB01

L-10

K

L-3

L-6

L-7

E-3

H-1

L-2

M-2

Drawing for Assembly

F-4

F-3

F-2

F-1

F-5

G-11

G-13

Exploded drawing

Parts List

Part No.

Description Spec. QTY

A Computer 1PCS

A-1 Screw 4PCS

B Axle assembly 1SET
B-1 Hex. Bolt 3PCS
B-2 Drive pulley 1PCS
B-3 Sleeve 1PCS
B-4 Axle set 1PCS

C Flywheel assembly 1SET
C-1 Flywheel 1PCS
C-2 Star washer 2PCS
C-3 Nut 3PCS
C-4 Flat washer 1PCS
C-5 Bearing 1PCS
C-6 Bearing 1PCS
C-7 One-way bearing set 1PCS
C-8 Bearing 1PCS
C-9 Bearing 1PCS

C-10 Axle for flywheel 1PCS
C-12 Sleeve for flywheel 1PCS
C-13 Pulley 1PCS

D Idler wheel assembly 1SET
D-1 Idler set 1PCS

D-2 Idler wheel

φ24xφ37x20.5mmL

1PCS

D-3 Nut 1PCS
D-4 Flat washer

φ8.5xφ25x1t

1PCS

D-5 Hex. Bolt M8xP1.25x20L 1PCS
D-6 Wave washer

φ10.5xφ15x0.3t

2PCS

D-7 Flat washer

φ6xφ12x1t

1PCS

D-8 Hex. Bolt M6xP1.0x12L 1PCS

E Screws for handlebar post 1SET
E-1 Flat washer

φ8xφ19x2t

2PCS
E-2 Allen bolt M8xP1.25x16L 4PCS
E-3 Semi-circular washer

φ8xφ19x2t

2PCS

F Magnet set assembly 1SET

F-1 Magnet set 1PCS
F-2 Hex. Bolt M6xP1.0*16L 2PCS
F-3 Spring washer 2PCS

F-4 Flat washer

φ6xφ13x1t

2PCS
F-5 Gear box 1PCS

G Main frame assembly 1SET

G-1 Main frame 1PCS
G-2 Resistant screws 2PCS
G-3 Adjustable knob 1PCS
G-4 Screw M4x10L 1PCS

G-5 Wave washer

φ17.5xφ25x0.3t

1PCS

G-6 Flat washer

φ17.5xφ25x0.3t

1PCS

G-7 C-ring 1PCS
G-8 Crank (Left) 1PCS

G-9 Crank (Right) 1PCS
G-10 Sleeve for seat post 1PCS
G-11 Bearing 2PCS

G-12 Idler spring

ODφ16xφ2.0x35T

1PCS

G-13 Sensor box 1PCS
G-14 Sensor holder 1PCS
G-15 DC wire 1PCS
G-16 Belt 1PCS
G-17 Chain cover(left) 1PCS
G-18 Chain cover(right) 1PCS
G-19 Self-tapping screw M4x50L 6PCS
G-20 Self-tapping screw M4x30L 1PCS

G-21 Drilling screws

3/16″（#10）x3/4″

6PCS

G-22 Adapter

230V 50HZ,9VDC

1.5A

1PCS

G-23 Cover for handlebar post 1PCS
G-24 Pedal 1PCS
G-25 Sensor wire (lower) 1PCS

H Handlebar post assembly 1SET
H-1 Handlebar post 1PCS
H-2 Sensor wire (Upper) 1PCS

I Rear stabilizer assembly 1SET
I-1 Drilling screws 4PCS
I-2 End cap (Left) 1PCS
I-3 Adjustable cap 2PCS
I-4 End cap (Right) 1PCS
I-5 Rear stabilizer 50*98*1.5tx400L 1PCS

J Front stabilizer assembly 1SET

J-1 End cap (Left) 1PCS
J-2 Allen bolt M8xP1.25x40L 2PCS

J-3 Transport wheel

φ57xφ8x20

2PCS

J-4 Nut 2PCS
J-5 Flat washer

φ8*φ19*2T

2PCS

J-6 End cap (Right) 1PCS
J-7 Front stabilizer 1PCS