Orbit OBK 8604 Owner's Manual

IMPORTANT SAFETY NOTICE

Note the following precaution before assembling and operating the machine.

1. Assemble the machine exactly as the descriptions in the instruction manual.

2. Check all the screws, nuts and other connections before using the machine, only

do exercise on the machine when it is in proper working condition.

3. Set up the machine in a dry level place and keep it away from moisture and water.

4. Place a suitable support (e.g. rubber mat, wooden board etc.) beneath the

machine in the area of assembly to avoid dirt.

5. Before beginning the training, remove all objects within a radius of 2 meters from

the machine.

6. Do not use aggressive cleaning articles to clean the machine. Only use the

supplied tools or suitable tools of your own to assemble the machine or repair any

parts of machine. Remove drops of sweat from the machine immediately after

finishing training.

7. Your health can be affected by incorrect or excessive training. Consult a doctor

before beginning the training program. He can define the maximum setting (Pulse.

Watts. Duration of training etc) to which you may train yourself and can get precise

information during training. This machine is not suitable for therapeutic purpose.

8. Only do training on the machine when it is in correct working way. Use only

original spare parts for any necessary repairs.

9. This machine can be used for only one person’s training at a time.

10. Wear training clothes and shoes that are suitable for fitness training with the

machine. Your training shoes should be appropriate for the trainer.

11. If you have a feeling of dizziness, sickness or other abnormal symptoms, please

stop training and consult a doctor immediately.

12. People such as children and handicapped persons should only use the machine

in the presence of another person who can give aid and advice.

13. The power of the machine increases with increasing the speed, and the reverse.

The machine is equipped with adjustable knob that can adjust the resistance.

14．Maximum user’s weight is 100KGS.

WARNING: It will be harmful if you disobey the above-mentioned

PRECAUTIONS!

EXPLOADED DIAGRAM

PARTS LIST

NO.

DESCRIPTION

QTY

NO.

DESCRIPTION

QTY

1

Main Frame

1

21L/R

Crank (L/R)

1pr.

2

Cross Pan Head Screw

2

22L/R

Pedal (L/R)

1pr.

3

Upper Sensor Wire

1

23

Bushing

1

4

Pulse Sensor Wire

2

24

Cross Pan Head Screw

4

5

Saddle

1

25

Flat Washer

1

6

Saddle Slider

1

26

Rear End Caps

2

7

Handlebar

1

27

Rear Bottom Tube

1

8

Flat Washer

1

28

Carriage Bolt

4

9

Spacer Bushing

1

29

Saddle Post

1

10

Handlebar Chuck Cover

1

30

Pop-pin Knob

1

11

T shape Bolt

1

31

Knob

1

12

Handlebar Post

1

32

End Cap

2

13

Arc Washer

8

33

Foam Grip

2

14

Inner Hex Bolt

4

34

Saddle clip

1

15

Upright Post Cover

1

35

Flat Washer

3

16

Sensor Wire

1

36

Nylon nut

3

17

Console

1

37

Flat washer

2

18L/R

Front End Caps

2

38

U Twist

1

19

Acorn Nut

4

39

Square end cap

2

20

Front Bottom Tube

1

40

Round end cap

1

41

Adaptor

1

NOTE:

Most of the listed assembly hardware has been packaged separately, but some
hardware items have been preinstalled in the identified assembly parts. In these
instances, simply remove and reinstall the hardware as assembly is required.

Please reference the individual assembly steps and make note of all preinstalled

hardware.

ASSEMBLY INSTRUCTION

Step one:

Fix the Front Bottom Tube (20) and Rear
Bottom Tube (27) onto the Main Frame (1)
with Carriage Bolt (28), Arc Washer (13) and
Acorn Nut (19) as shown.

Step Two:

Attach the Left/Right Pedal (22L/R) to the
Left/Right Crank (21L/R) of the Main Frame
(1).

Note: The left pedal (22L) should be tighten in
the counterclockwise direction, the right pedal
(22R) should be tighten in the clockwise
direction.

Step Three:

1. Lock the Saddle clip(34) on the right bolt on saddle(5)
with Nylon nut(36) and Flat Washer(35).

2. Attach the Saddle (5) to the Saddle Slider (6) with tool.

3. Adjust the Saddle Slider (6) to a suitable position, and
then fix it onto the Saddle Post (29) with Knob Nut (31)
and Flat Washer (25).

4.Insert the Saddle Post (29) into the post of Main Frame
(1), and then fix it with Pop-pin Knob (30) after adjusting
to a suitable height.