Orbit OBE8718 Owner's Manual
2
Before Y ou Start
Thank you for purchasing this Recumbent Bike! For your safety and benefit, read this manual
carefully before using the machine.
Prior to assembly, remove components from the box and verify that all the listed parts were
supplied. Assembly instructions are described in the following steps and illustrations.
IMPORTANT SAFETY NOTICE
BE SURE TO READ THE ENTIRE MANUAL BEFORE YOU ASSEMBLE OR OPERATE
YOUR MACHINE. IN PARTICULAR, NOTE THE FOLLOWING SAFETY PRECAUTIONS:
01. Assemble the machine exactly as described in the instruction manual.
02. Check all the screws, nuts and other connections before using the machine, only exercise on
the machine when it is in correct working order. Ensure that all users are adequately informed
of all precautions.
03. Set up the machine in a dry level place and away from moisture and water; before beginning
exercise, remove all objects within a radius of 2 meters from the machine.
04. Place a suitable base (e.g. rubber mat, wooden board etc.) beneath the machine while
assembling or exercising to avoid scratching, dirt and etc.
05. Do not use aggressive cleaning agents to clean the machine, remove drops of sweat from the
machine immediately after finishing exercising.
06. Only use the supplied tools or suitable tools of your own to assemble the machine or repair any
parts of machine, use only original spare parts for any necessary repairs.
07. Your health can be affected by incorrect or excessive exercising. Before beginning this or any
exercise program, consult your doctor. This is especially important for people over the age of
35 or those with pre-existing health problems.
08. This machine is intended for home use only, not suitable for commercial purpose.
09. Wear appropriate clothes and athletic shoes when exercising.
10. If you have a feeling of dizziness, sickness or other abnormal symptoms, please stop
immediately and consult your doctor.
11. The maximum user’s weight is 120KGS.
3
EXPLOADED DIAGRAM
4
5
PARTS LIST
Part No. Description Qty Part No. Description Qty
1 Main frame 1 48 Round cap 2
2 Front bottom tube 1 49 Pulse 2
3 Rear bottom tube 1 50 Foam grip 2
4 Handlebar post 1 51a/b Protective guard 1pr.
5 Fixed handlebar 1 52 Screw M4x10 4
6L/R Handlebar 1pr. 53 Hex screw M8x16 8
7L/R Swing tube 1pr. 54 Adapter 1
8L/R Pedal support 1pr. 55 Hand pulse wire 2
9 End cap 2 56 Long axle 1
10 Hex screw M8x40xL12 2 57 Sensor wire 1
11 Roller 2 58 Protective guard 1
12 Flat washer D8xΦ16x1.5 12 59 Extension wire 1
13 Nylon nut M8 12
60L/R Chain cover
1each
14 Hex nut M10 4
61 Turn plate block 2
15 Adjustable cushion 4
62 Turn plate 2
16 Arc washer d8x2xΦ25XR39 4
63 Flange nut 2
17 Hex screw M8xL58 4
64 Hex bolt 2
18 Spring washer D8 12
65 Spring washer 6
19 End cap 2
66 Flat washer 2
20 Crank 2
67 Spring washer 2
21 Wave washer Φ17xΦ23x0.3 4
68 Magnetic board 1
22 Plastic bushing 4
69 Magnetic 14
23L/R Pedal tube joint 1pr.
70 Tension spring 1
24 D-shape washer 4
71 Magnetic plate axle 1
25 Spring washer D10 4
72 Hex bolt 1
26 Hex screw M10x20 4
73 Hex nut 2
27 Screw M5x10 4
74 Sensor 1
28a/b Protective guard 2pr.
75 Spring washer 2
29 Hex bolt M10x55 2
76 Bearing 2
30 Flat washer D10xΦ20x2 4
77L/R Protective guard
1each
31 Nylon nut M10 4
78 Tension control cable 1
32 Bushing Φ18xΦ10x11 4
79 Motor 1
33 Hex screw M8x45 6
80 Hex nut 2
34L/R Pedal 1pr.
81 Hex nut 2
35 Screw ST4.2x18 14
82
U-shape washer
2
36L/R Protective guard 2pr.
83 Bolt 2
37 Screw Φ12xM10x80 2
84 Thin nut 2
38 Flat washer D12xΦ24x1.5 2
85 Spacer 2
39 Bushing Φ12xΦ32x15 4
86 Bearing 2
40 Alloy bushingФ34×Ф25.2×21 6
87 Flywheel 1
41 Screw ST3.5x10 4
88 Flywheel axle 1
42a/b Protective guard 2pr.
89 Bolt 4
43 Arc washer D8xΦ19x1.5xR30 4
90 Belt tray 1
44 Carriage bolt M8xL45 4
91 Axle 1
45 Foam grip 2
92 Nylon nut 4
46 Round cap 2
93 Belt 1
47 Computer 1
Loading...