Orbelle EMMA User Manual

ORBELLE’S ORIGINAL DESIGN
SEE MORE PRODUCTS AT:
WWW.ORBELLE.COM

FOR INSTRUCTION ONLY

EMMA

ASSEMBLY INSTRUCTIONS

Read all instructions before
assembling crib.

Save instructions for future use.

Carefully remove and lay out all parts.
Familiarize yourself with all diagrams to
facilitate the assembly of your crib.

Check parts and the enclosed hardware bag
with the hardware parts list to be sure all
are included and quantities are correct.

Destroy cardboard and plastic bags
immediately.

MANUFACTURE DATE: JUNE 2009

Attention: In order to properly assemble
the crib, follow the assembly instructions
in the specified order.
Failure to assemble the crib in the manner
recommended could make the crib hazardous.

Warning:Never use this product if there are any
loose or missing fasteners, loose joints,broken
parts, or torn mesh/fabric. check before
assembly and periodically during use. Contact
ORBELLE. for replacement parts and
instructional literature if needed.

MADE IN CHINA

1

WARNING

.Failure to follow these warnings and the instructions could result in serious injury

or death.

.Read all instructions before assembling crib,keep instructions for futher use.
.Upon completion of assembly be sure all screws, bolts and fastening devices have

been securely tightened.A frequent check should be made.

.Never use this product if there are any loose or missing fasteners, loose joints,broken

parts, or torn mesh/fabric. check before assembly and periodically during use.
Contact ORBELLE for replacement parts and instructional literature if needed.

.Never substitute parts, the product including side rails, must be fully erected

prior to use.

.Discontinue use of the product when child is able to climb out or reaches the height

of 35in.(900mm).

.Never place product near window where cords from blinds or drapes can strangle

a child.

.When child is able to pull to standing position,set mattress/base to lowest adjustment

position and remove bumper pads, large toys ,and other objects that could serve as
steps for climbing out.

.Never use plastic shipping bag or other plastic film as mattress covers not sold and

intended for that purpose, they can cause suffocation.

.CATION: Any mattress used in this crib must be at least 27-1/4inches(690mm) by

51-5/8 inches(1310mm),with a thickness not exceeding 6 inches(150mm), the
dimensions of the mattress shall be taken from seam to seam or edge to edge where
appropriate.

.Never use a watter mattress with this product.
.Strings can cause strangulation! Never place items with a string around a child’s

neck,such as hood strings or pacifier cords. Never suspend strings over product or
attach strings to toys.

.Infants can suffocate in gaps between a mattress too small or too thick and product

sides ,on soft bedding never add a mattress, pillow,comforter,or padding.

.To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on

their back to sleep, unless otherwise advised by your physician.

.If refinishing,use a non-toxic finish specified for children’s products.

MADE IN CHINA

2

PARTS LIST FOR # EMMA

A

A: Left head board (1PC)
B: Right head board (1PC)

C: Front rail (1PC)

D: Back rail (1PC)

B

E: Stabilizer bar (1PC)

a: 3” Allen head bolt (10 pcs) c: 2” Allen wrench (1 pc)

d: 2” Allen head bolt (4 pcs)

F: Mattress support (1PC)

b: Barrel nuts (10 pcs)

e: 3/4” Allen head bolt (4 pcs)

G: Guard rail (1PC)

f: Castors (2 pcs) g: Castors (2 pcs)

3