Page 1
TECHNICAL SPECIFICATIONS
1
BLUE
PAPERS
ALMA
TECHNICAL MANUAL
Page 2
TECHNICAL SPECIFICATIONS
2
CONTENT
GEOMETRY AND SPECIFICATIONS 3
FRAME MATERIAL AND CARE 5
PARTS AND HARDWARE 6
ADDITIONAL INFORMATION 14
TORQUE SPECIFICATIONS 15
ORBEA WARRANTY 16
ADDITIONAL INFORMATION 17
Page 3
TECHNICAL SPECIFICATIONS
3
GEOMETRY AND
SPECIFICATIONS
27” 29”
SIZES (mm) 16"/S 17,5"/M 17,5”/M 19"/L 21"/XL
1.
Seat tube 400 445 445 483 533
2.
Top tube (EFF) 552 583 mm 591 613 638
3.
Head tube 95 105 100 110 125
4.
Chain stay 423 436
5.
BB height 313 310
6.
BB offset -42 -60
7.
Wheelbase 1038 1070 1084 1106 1132
8.
Head angle 70,5º
9.
Seat angle 73,5º
10.
Standover 720 747 747 777 820
11.
Reach 380 409 409 423 449
12.
Stack 577 587 611 621 635
13.
Fork length 489 (100 mm) 501 (100 mm)
*Altura orientativa y que puede variar según morfologia del usuario y preferencias geometricas y de uso.
Page 4
TECHNICAL SPECIFICATIONS
4
TECH SIZES
FORK 100 mm tapered
HEADSET Integrated. Same as Occam or Oiz
SEATPOST 27,2 mm
SEATCLAMP 33 mm, not standard
FRONT DERAILEUR 35 mm
BB Shimano presst 92 mm
REAR WHEEL AXLE 135 mm QR9
CHAINRING INCOMPATIBILITY XX1 38T
REAR BRAKE MOUNT PM 160mm Only
CABLE ROUTING Full DCR, ICD and Di2 ready
27” 29”
SIZE (mm) 16"/S 17,5"/M 17,5”/M 19"/L 21"/XL
Crank 170 175 175 175 175
Stem 70 90 90 90 110
Handlebar 710 710 710 710 710
27” 29”
HEIGHT (mm) SIZES
155-170 16-S
165-180 17,5”-M 17,5”-M
175-190
710
19”-L
185-198 21,5”-XL
GEOMETRY AND
SPECIFICATIONS
Page 5
TECHNICAL SPECIFICATIONS
5
FRAME AND MATERIAL
Orbea frames are carefully designed to be durable,
efcient, and easy to maintain. Alma tubes are stiff and light, giving excellent steering precision and
pedaling efciency. Alma carbon frame is extremely
resistant to corrosion, making it perfect for riding off
road. With only a minimum amount of maintenance,
it’s easy to keep your Oiz in top condition.
1) Keep your mountain bike clean
Washing your bike with mild soap and water will keep
you looking stylish and allow you to check the condition of the frame and components. Dont’s use high
water pressure and avoid spraying water into bearings
or frame tubes. Citrus degreasers are biodegradeable and do a great job of removing dirty grease from
gears and chain.
2) Keep your mountain bike lubed
Once your bike is clean, it’s a good time to put fresh
lube on the chain. Use only enough to get inside the
links and wipe off any excess because it will attract
dirt. Headset and pivot bearings should be inspected
every few months for smoothness and to ensure that
the seals are intact and lube is clean.
3) Inspect your mountain bike before you ride
Do a quick check before every ride to make sure your
bike is in excellent condition. It is very common to discover small issues at home that can become big problems on the trail. CHAIN Is the chain dirty, noisy or
dry? Clean and lube your chain before riding. BRAKES
Check your brakes to make sure they are working
correctly. Check for missing/loose caliper and rotor
bolts. TIRES Look for damage to the sidewalls of your
tires. Check and adjust tire pressure. WHEELS Spin
the wheels and look for wobbles, check for loose or
broken spokes. Check quick release levers to make
sure they are functioning properly. FRONT END Stand
over the saddle, pull on the brakes and rock the bike
back and forth. Feel for any play or knocking that might indicate a loose headset, loose brake rotors or calipers, or worn fork bushings. TEST RIDE Take a quick
ride up and down the street to make sure your bike
is shifting and braking properly. Listen for unusual
noises.
AFTER A CRASH OR IMPACT
Falling is part of mountain biking and it’s impossible
to avoid minor accidents. If you crash your Alma,
please make sure you are okay and seek medical attention if necessary. If you are not injured, you should
check your bike before continuing:
1) Inspect your frame and components for damage. Do not ride your bike if any problems are de-
tected.
WHAT TO LOOK FOR
Inspect Frame and fork for evidence of cracking or
bending. If cracks are discovered, discontinue use
immediately.
Check the drivetrain and spin the wheels to make sure
components are operating correctly. If you discover
damage to your components, discontinue use immediately.
Even if you don’t nd any damage, pay careful attention to the sound of your bike when you continue
riding. Unusual noises can be caused by cracks or
other problems. A well-maintained bike will be quiet
and free of creaks or squeaks. Investigate and locate
the source of any new noises.
2) Bring your bike to your Orbea dealer for professional inspection. Some damage can only be de-
tected by disassembling the bike to check for cracks
or other signs of stress.
A crash or impact can put extraordinary stress
on your bike and components, causing them
to fail or to fatigue prematurely. Failure can
happen suddenly with no warning, causing loss
of control, serious injury or death.
Page 6
TECHNICAL SPECIFICATIONS
6
1
2
1. SEAT CLAMP Cod: 16100235
Number Name/Description
1
ABRAZADERA SILLIN ALMA 14 NEG
3. HANGER Cod: 16100237
Number Name/Description
2
HANGER
2. SEAT CLAMP Cod: 16100236
Number Name/Description
1
ABRAZADERA SILLIN ALMA 14 TITA
PARTS & HARDWARE
Page 7
TECHNICAL SPECIFICATIONS
7
3
4
4
4. CHAINSTAY PROTECTOR Cod: 11000273
Number Name/Description
3
Chainstay protector
5. REAR BRAKE HOSE GUIDE Cod: 16100238
Number Name/Description
4
Rear brake hose guide
Page 8
TECHNICAL SPECIFICATIONS
8
5
5
5
66
Cod: 12301062
Number Name/Description
5
M5 / Ti M5
7. BOTTLE CAGE SPACER Cod: 16100239
Number Name/Description
6
Bottle cage spacer
Page 9
TECHNICAL SPECIFICATIONS
9
7
8. INTEGRATED CABLE GUIDE Cod: 11001174
Number Name/Description
7
M5 integrated plastic cable guide
Page 10
TECHNICAL SPECIFICATIONS
10
RD
RD
FD
FD
PARTS & HARDWARE / CABLE ROUTING
* This frame is designed to work only with Orbea DCR´s full liner system. Using the frame without these liners
will result in irreversible frame damage that will not be covered by the warranty.
Page 11
TECHNICAL SPECIFICATIONS
11
PARTS & HARDWARE / ELECTRONIC ROUTING (Di2)
3
1
2
* This frame can be made compatible with Fox ICD and Shimano Di2 shifting systems, to do so please get in
contact a Orbea dealer.
Number Name/Description
3
Tapon Di2 Alma con agujero
Number Name/Description
1
Tapon Di2 Avant
2
Tapon Di2 Alma sin agujero
Page 12
TECHNICAL SPECIFICATIONS
12
Cod: 11001123
Number Name/Description
4
Tapon shim Di2 (D6)
2
3
4
Number Name/Description
2
Tapon Di2 Alma sin agujero
3
Tapon Di2 Alma con agujero
Page 13
TECHNICAL SPECIFICATIONS
13
PARTS & HARDWARE / ELECTRONIC ROUTING (iCD)
CABLE GUIDE Cod: 11001174
3
Page 14
TECHNICAL SPECIFICATIONS
14
PARTS & HARDWARE / Electronic System
Page 15
TECHNICAL SPECIFICATIONS
15
TORQUE SPECS
ALMA TORQUE SPECIFICATIONS
Fastener Required tools Torque Note
1 4 mm hex 5 Nm
2 4 mm hex 3 Nm
3 5 mm hex 10 Nm
Minimum bolt insertion
8 mm
4 3 mm hex 4 Nm
CHECKING AND ADJUSTING TORQUE
Bolt tightening torques should be checked frequently,
specially if any kind of malfunctioning, noise, play or
vibration is detected in the bike.
4
4
4
1
3
2
3 4
Page 16
TECHNICAL SPECIFICATIONS
16
ORBEA WARRANTY
HOW DO I ACTIVATE MY
LIFETIME WARRANTY?
Orbea provides a lifetime warranty on all its frames.
Only a brand that knows the materials, masters the
technologies and has the skills can guarantee that
your frame is totally invincible. Only Orbea takes you
a step beyond.
Orbea’s lifetime warranty is activated using the regis-
tration number you will nd on all frames from the
2009 range onwards. When you have activated it at
your dealer or at www.orbea.com, your bike will automatically receive its lifetime warranty. The registration
number is a unique, non-transferable code that you
will nd on the underside of your bike’s downtube.
Activate your frame’s warranty using this number at
your dealer’s or at www.orbea.com.
WHAT ARE THE ADVANTAGES?
Lifetime guarantee of your frame against breakage.
Two-year guarantee on all components.
Identication of your bicycle and all its characteristics
to our Technical Assistance Service so that wecan provide our best response to any problems. Access to
special offers, events and prize drawings.
ORBEA WARRANTY
The ongoing efforts we make at Orbea to design highend bicycles enable us to provide customerswith the
following warranty:
1) We back each frame and rigid fork in our bicycles
with a lifetime warranty against materials and manufacturing defects. Frames with travel longer than 170
mm are covered by a 2-year warranty. We warrant
each frame and fork in our bikes against paint or varnish defects and corrosion for 3 years. This warranty
covers the original purchaser only and is non-transferable. For the lifetime warranty to be valid,customers
must ll in t he online warranty form within one month of purchase, and proof of purchase in the form of
cash register receipt or sales ticket is required.
2) Warranty claims are subject to the decision made
by our technical staff about the nature of the defect
after thorough inspection of the faulty part.
3) All the parts assembled in our bicycles are protected against assembly or manufacturing defects for 2
years, and repairs qualifying under this warranty will
be performed by authorized dealers in each country.
4) This warranty does not cover parts that naturally
wear over time, such as tires, brake pads, handlebar
grips, cranksets, bearings, etc.
5) This warranty does not cover damages or defects
caused by negligence, improper use, assembly ofparts
or accessories that are not original, or defective repair
or maintenance work. of the bicycle, nonoriginal ac-
cessories being tted to it, or unsuitable maintenance
operations or handling.
6) This warranty includes only replacement or repair
coverage of the parts under it and in no case shall it
cover personal damages directly or indirectly caused
by the failure of said parts during use.
7) All claims must be reported to an authorized dealer.
In case there is no such a dealer near the buyer’s location, please contact Orbea so that we can decide
how to solve the problem.
8) In case of crashes, the Orbea warranty shall be considered null and void.
Page 17
TECHNICAL SPECIFICATIONS
17
ADDITIONAL INFORMATION
YOUR ORBEA DEALER
Our dealers are experts and should be able to assist
you with setting up and maintaining your Orbea bicycle. A complete listing of Orbea dealers and distributors can be located on our website:
http://www.orbea.com/int-en/dealers/?country=INT/
AFTER SALES SERVICE
Our service technicians are trained to handle any
questions you might have about your Orbea bicycle.
mailto:Orbea@Orbea.com
FACEBOOK
TECH VIDEOS
INSTAGRAM
ORBEA CONTENT
TWITTER
Orbea participates actively on facebook and Twitter
with our fantastic global community of riders. Looking to nd spots to ride or plan a vacation? Someone will have the answers:
Visit our Orbea Channel on YouTube for a variety of
helpful setup and tech videos:
http://www.youtube.com/user/OrbeaBicycles/
www.facebook.com/OrbeaBicycles
https://twitter.com/Orbea/
instagram.com/orbeabicycles
View and download photos, videos and documents.
http://content.orbea.com/
Page 18
TECHNICAL SPECIFICATIONS
18
BLUE
PAPERS
ALMA
TECHNICAL MANUAL
Loading...