orativo Lanix de C V L8 User Manual
1
STARTING UP
Before using your tablet for the first time, completely charge the battery!
ENGLISH
Charging the Battery
1. Connect the supplied power cable to the tablet and to a wall outlet.
2. The tablet device will turn on and start charging.
Installation Wizard
The first time you start up your tablet, the installation wizard will bring you
through a few screens to help you set up the principal settings: language, country,
time, etc.
1
2
1. Power Button: press and hold to switch on.
- To switch off, when you press and hold on the Power button, “Power Off” >
“Ok” to fully shut down your 3G
-To put your device in standby, press the Power button once.
2.
Volume Bottons
3. Micro-USB port: to connect your tablet to your computer, using the included USB
cable
(to transfer files) .
4. SIM card slot: Any standard SIM card can be inserted.
5. Micro-SD card slot: a Micro-SD card should be inserted in the device. It allows the
device to be identified as a
removable storage
when connected to a PC.
6. Loudspeakers
7. Headphone jack
DESCRIPTION OF THE TABLET
ENGLISH
3
CONNECTING TO A MOBILE NETWORK
Your tablet is equipped with a SIM card slot. Any standard SIM card can be inserted. There is no
provider restriction. Note that the tablet will only have signal if you are in an area covered by your mobile
network provider’s network.
Inserting your SIM card
IMPORTANT: Before inserting a SIM card, you must turn off the device.
1. Switch off the device.
2. Insert the SIM card in the SIM card slot.
3. Turn on the device.
A Pin number may be requested. Enter the SIM card pin number.
Your device will attempt to connect to the mobile network of your provider.
NOTE: If your device does not connect to your mobile network provider’s network
1. Contact your mobile network provider to obtain the connection parameters.
2. On your device, tap the Menu icon, then settings.
3. Select Wireless & networks > Mobile networks.
In Network operators, select your operator.
In Access Point Names, select the correct access point name and enter the exact connection parameters.
3
ENGLISH
Loading...