Opzoon Technology OPD1AA001 Users Manual

Manual

Outlook

Front ID card identiﬁcation area

ID card identiﬁcation area

Fingerprint identiﬁcation area

Installation Guide

Power switch

OTG Debug USB

RJ45 DC12V

Microphone

Product Speciﬁcation

Product model

Facial anti-counterfeit

Recognition distance

Recognition mode

Ambient light range

Processor

Memory

Flash

Camera

Display

Ambient temperature

Power

Dimenstion

WIFI

Bluetooth

Netword port

USB

OTG

Debug

OFR-D1

Support

60 ~ 90 cm

1 : N , 1 : 1 , 1:1 / 1:N

0 ~ 800LUX(Camera lens should be avoided from the

direct sunlight)

2.1GHz quad-cord CPU plus 192-cord GPU

2GB DDR3 RAM

16GB（scalable）

Dedicated binocular camera (visiable light and near-infarad lens)

8.0" IPS LCD touch screen

0℃ ~ 45℃

12V 4.16A Max

270 x 173.18 x 230.64 mm (L x W x H)

Support

1 1 1 1 1

Touch panel

Manual

Welcome

Press the power button boot device, "Wizard" will guide you through a few simple steps to set up your device. You can connect to the Internet through WLAN or wired network, press the "Wizard" to complete the activation device.

You need to register an account on the "Opzoon facial recognition cloud management platform" (https://www.opzoonface.com). Login

account, will be able to perform remote conﬁguration management, decentralization of authority, distribution of content and business rules.

[Note] If you do not activate the device, the device can only use the basic functions, business functions can not be used "Opzoon facial recognition cloud management platform" provides.

Device Managment

Administrators can screen device by clicking the "Management" button, validated, enter the management interface. Standalone mode is provided in the apparatus to complete the relevant management interface; Network mode version can be done by setting the management platform or App.

情景选择

Biopsy threshold setting

In vivo detection of visible light threshold (The large the value,the more stringent)

Face recognition threshold setting

Visible light threshold (The similarity is greater than this value)

Near infrared threshold (The similarity is greater than this value)

人脸识别设置

Parameters Conﬁguration

快速情景适合人流量大且快速通过

30%

0% 100%

Near infrared threshold (The large the value,the more stringent)

0% 100%

50%

60%

20%

CANCEL OK

100%

Face recognition is set according to the general usage scenarios, we oﬀer a default option for you to choose to use. You can also according to diﬀerent usage scenarios, manually set the scene and face

Saturday

Place IC ID Card

recognition mode, ﬂexible and controllable.

After the "Getting Started", enjoy the elegance of face recognition service.

Software Upgrade

Copy the downloaded ﬁrmware to a USB disk and insert USB drive machine, device management, ﬁrmware upgrade click, select USB drive ﬁrmware, click on "Enter Upgrade", then the device will automatically complete the ﬁrmware upgrade.

Setting

Device Recognition Set ID face comparison

Date or Time Display Setting Speaker Setting

Memory Usage Reboot Factory Default

Firmware Upgrade Administrator Period

Rule Internet Setting

Standby Advertising

Select File

Firmware Upgrade

ENTER UPGRADE

More Information

Security Information

Failure to comply with safety instructions may result in ﬁre, electric shock, or other injury or damage to the product or other property. Nonstandard ground wire may be dangerous. Do not disassemble products and opening an enclosure itself. Non-professionals do not open, alter or repair the product.

Recycling and Environmental Protection Information

Based on "waste electrical and electronic product recycling regulations", when users no longer need the product, please observe local waste electrical and electronic products recycling-related laws and regulations, will have certiﬁed products to local recycling companies for recycling.

To satisfy FCC RF exposure requirements, a separation distance of 20cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operations at closer than this distance is not recommended.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.

—Consult the dealer or an experienced radio/ TV technician for help.

Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Opzoon Technology OPD1AA001 Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual