Opus Technologies Octopus User Manual

Octopus
Multi-Room
Entertainment System

User Guide

by Opus Technologies

Important safety warnings and precautions are included within the Installation Guide supplied with this system. Please
ensure you read these. If you do not have a copy of this guide please ask you installer or dealer or download a copy at:

www.opus-ttechnologies.co.uk

2

Component overview

Master control unit

(MCU300)

Central control unit, which connects to your audio/visual

sources and distributes them to the desired zone

AMR650

Active and passive A-BUSTMcompatible

ceiling mounted speaker pair

Wall control unit

(WCU310)

Keypad used to select and control

sources connected to the MCU

Video switching unit

(VSU300)

Distributes visual sources to zone

screens (optional)

System remote control

(SRC300)

System remote control for everday use

in conjunction with the keypad

Learning remote control

(LRC300)

Learning remote for controlling source

equipment and teaching infra-red

source commands to the MCU (see

dedicated manual for operation)

3

WCU310 wall control unit

Standby

A short push will turn the system
on and the Status LED will
illuminate.

Another short push will turn the
keypad and it’s corresponding
zone off.

A long push (2secs approx) will
switch the whole system to standby
and the Status LED will turn off
(Enhanced Opus mode only - see
Installation guide).

Select

A short push changes selected

audio source. The Status LED will

"blink" to indicate that a change of

audio source is being actioned

(Enhanced Opus mode only - see

Installation Guide).

A long push (2secs approx) will

activate the Sound Adjustment

functions (see following page).

Up / Down

Use these buttons to control the

Sound Adjustment functions (see

following page).

Defaults to Volume control.

Sound Adjustment LEDs

See following page.
Defaults to displaying volume level

Status LED

4