Opus CS 2208 CD User Manual

User’s guide CS 2208 CD

User’s guide

CS 2208 CD

User’s guide CS 2208 CD

Health & Safety precautions:

• Before using, the equipment please read the Health & Safety precautions, manufacturers’ recommendations and
the operating manual.

• The operating manual should be available at all times for the operator to read.

•

The equipment can only be used in accordance with the specifications in the user guide/manual.

• should be installed on a sturdy and level surface near a 220 to 240 V AC socket.

• the socket should be earthed in accordance with electrical regulations.

• must be protected against moisture and dust.

• Do not put the equipment near heating or ventilation units.

• The equipment must not be used in or near a room with inflammable liquids or gases.

• Do not use the equipment near aerosols of, oil or grease made from petroleum or inflammable substances.

• Do not use compressed air from a aerosol for clearing shredder.

• The power supply cable should be protected against any damage and not be used to pull the equipment or to

remove the plug from the power socket.

• Unplug the equipment from the power socket when removing the cover or cleaning the inside.

• The equipment should be kept away and out of reach of children and animal’s.

• Danger! Equipment contains rotary elements. Keep away, long hair, loose jewellery, ties and other loose pieces of

clothing as they can become entangled in the cutting head.

• Be careful when feeding material into the slots.

•

When the motor overheats, it will turn off without a single, turn off the main switch of the shredder immediately and wait
for it to cool down!

• Do not put any heavy objects on the device!

• When any malfunction occurs, check that the equipment is being used correctly and then contact the dealer or

service point.

• The equipment must not be put or kept outside and should be operated in a room temperature higher than +8°C.

• The equipment should be operated accordance to the general Health & Safety rules.

• Any repairs must be carryout by only authorised staff.

•

After using the shredder, it must be turned off by the main switch or by unplugging it from the power socket.

Recommendations:

• The equipment was designed for shredding paper, credit cards and CD/DVDs.

• During longer none operation, the mains switch should be turned “OFF’ and unplugged.

• Empty the shredded waste from the bin frequently

• The shredder can only be operated with the original paper bin supplied.

• To ensure long and faultless use of the equipment do not shred more than 8 sheets of 80gram/m² paper at one time.

• Do not shred computer continues printout paper, PVC foil, coated paper or cardboard as it can damage of cutting

knifes and mechanism and over load the electric motor.

• The shredder is able to deal with light staples and paper clips

NOTE! Not complying with the recommendations above can result,

with the guarantee/warranty being made void.