Optris PI 400i Applications

optris PI 450i T010

TECHNICAL DATA

IR camera for the detection of

slightest temperature di󰀨erences

for fever screening applications

Technical specications

Optical resolution 382 x 288 pixels

Detector FPA, uncooled (17 µm x 17 µm)

Spectral range 8 – 14 µm

Temperature range –20 °C ... 100 °C

Frame rate 80 Hz / switchable to 27 Hz

Optics (FOV) 18° x 14° / f = 20 mm or

Thermal sensitivity (NETD) 40 mK with 29° x 22° FOV / F = 0.9

Features:

• Smallest camera in its class (46 x 56 x 68 – 77 mm)

• Interchangeable lenses

• Superb thermal sensitivity of 40 mK

• Licence-free analysis software and calibration certicate

included

29° x 22° / f = 12,7 mm or
53° x 38° / f = 7,7 mm or
80° x 54° / f = 5,7 mm

40 mK with 53° x 38° FOV / F = 0.9
40 mK with 80° x 54° FOV / F = 0.9

0.06 K with 18° x 14° FOV / F = 1.1

PI 450i T010 and PC with software PIX Connect

Accuracy ±2 °C

Accuracy with BR 20AR
(T

18 °C ... 33 °C)

Amb

PC interfaces USB 2.0 / optional USB to GigE (PoE) interface

Standard process interface (PIF) 0 – 10 V input, digital input (max. 24 V), 0 – 10 V output

Industrial process interface (PIF)
(optional)

Cable length (USB) 1 m (standard), 5 m, 10 m, 20 m

Ambient temperature 0 ... 70 °C

Storage temperature – 40 ... 85 °C

Relative humidity 20 – 80 %, non condensing

Enclosure (size / protection) 46 x 56 x 68–77 mm (depending on lens + focus position) / IP 67 (NEMA 4)

Weight 237 - 251 g (depending on lens)

1)

Shock

/ Vibration

Tripod mount ¼ – 20 UNC

Power supply via USB

Scope of supply
(standard)

1)

For further information see operator‘s manual

1)

±0,5 °C (T

2x 0 – 10 V input, digital input (max. 24 V), 3x 0/4 – 20 mA output,
3x relay (0 – 30 V/ 400 mA), fail-safe relay

IEC 60068-2-27 (25G and 50G) / IEC 60068-2-6 (sinus shaped),
IEC 60068-2-64 (broadband noise)

• USB camera, incl. lens

• USB cable (1 m)

• Table tripod

• PIF cable, incl. terminal block (1 m)

• Software package optris PIX Connect

• Test certificate

• Rugged outdoor transport case (IP67)

• Certificate of calibration (reference temperature: 35 °C)

30 °C ... 40 °C)

Obj

Optris GmbH · Ferdinand-Buisson-Str. 14 · 13127 Berlin · Germany
Phone: [phone] · Fax: [phone] · Email: [e-mail] · www.optris.global

optris PI 450i T010

Dimensions

Recommanded accessory

optris BR 20AR - Ambient temperature referencing source

with bracket for ceiling or wall mount

Dimensions in mm

Installation of PI 450i and BR 20AR at an inspection gate for individual fever screening

Dimensions in mm

Specications are subject to change without further notice · PI 450i T010-DS-EN2020-04-A