Optris CTlaser P7 Specifications
optris
®
CTlaser P7
TECHNICAL DATA
Non-contact temperature
measurement of plastic
materials and glass surfaces
from 0 °C to 710 °C
(32 °F to 1310 °F)
Features:
• Accurate temperature measurement of thin plastic lm materials like PET, PU,
PTFE, PA and glass surfaces
• Double laser aiming marks real spot location and spot size up from 1.6 mm at
any distance
• Optics 45:1 with selectable focus, compact sensor head size
• Usable up to 85 °C (185 °F) ambient temperature without cooling and automatic
laser switch o at 50 °C (122 °F)
• Cooling and protection accessories for harsh environmental conditions
General specications
Environmental rating IP 65 (NEMA-4)
Ambient temperature
Storage temperature – 40 °C ... 125 °C (–4 °F ... 257 °F) (sensing head)
Relative humidity 10 – 95 %, non condensing
Vibration IEC 68-2-6: 3 G, 11 – 200 Hz, any axis
Shock IEC 68-2-27: 50 G, 11 ms, any axis
Weight 600 g (21.2 oz) (sensing head)
1)
– 20 °C ... 85 °C (–4 °F ... 185 °F) (sensing head)
(50 °C [122 °F] with laser ON)
– 20 °C ... 85 °C (–4 °F ... 185 °F) (electronics)
– 40 °C ... 85 °C (–40 °F ... 185 °F) (electronics)
420 g (14.8 oz) (electronics)
Electrical specications
Output / analog
Output / alarm 24 V / 50 mA (open collector)
Optional Relay: 2 x 60 V DC/ 42 V AC
Output / digital USB, RS232, RS485, CAN, Profibus DP, Ethernet
Output impedances mA max. 500 Ω (with 5 – 36 V DC)
Inputs Programmable functional inputs for external
0 / 4
–
20 mA, 0
– 5
/ 10 V, thermocouple J, K
; 0.4 A;
optically isolated
(optional)
mV min. 100 kΩ load impedance, thermocouple 20 Ω
emissivity adjustment, ambient temperature
compensation, trigger (reset of hold functions)
eff
Measurement specications
Temperature range
(scalable via programming keys or
software)
Spectral range 7.9 μm
Optical resolution
(90 % energy)
System accuracy
(at ambient temp. 23 ±5 °C)
(at ambient tem. 73 ±9 °F)
Repeatability
(at ambient temp. 23 ±5 °C)
(at ambient tem. 73 ±9 °F)
Temperature resolution (digital) 0.5 K
Exposure time
Emissivity/ Gain (adjustable via
programming keys or software)
IR window correction
(adjustable via programming keys or
software)
Signal processing (parameter adjustable via software)
Software optris
1)
The functioning of the LCD display may be limited in ambient temperatures
below 0 °C
2)
ε = 1, response time 1 s
3)
Whichever is greater
4)
With dynamic adaptation at low signal levels
2)
4)
(90 % signal) 150 ms
0 °C ... 710 °C
(32 °F ... 1310 °F)
45:1
±1 % or ±1.5 °C
(
±1 % or ±2.7 °F3))
±0.5 % or +0.5 °C
(±0.5 % or +0.9 °C
0.100 – 1.100
0.100 – 1.000
Peak hold, valley hold, average; extended hold
function with threshold and hysteresis
®
Compact Connect
3)
3)
3)
Cable length 3 m (standard), 8 m, 15 m
Power supply 8 – 36 V DC
Current draw max. 160 mA
Laser 635 nm 1 mW, ON/OFF via electronic box or software
(9.8 ft [standard], 26.2 ft, 49.2 ft)
Optris Infrared Sensing, LLC · 200 International Drive, Suite 170 · Portsmouth · NH 03801 USA
Phone: 603-766-6060 · E-mail: sales@optris-ir.com · www.optris.com
optris
Optical parameter
®
CTlaser P7
Chart SF optics, D:S = 45:1
SF
27 mm @ 1200 mm
(1.06 in @ 47.2 in)
45:1
S
(0.79)
D 0
20
21.7
23.4
25
27
38.4
50
(0.85)
(0.92)
(0.98)
(1.06)
(1.51)
300
600
900
1200
(0)
(11.8)
(23.6)
(35.4)
(47.2)
1500
(59.0)
(1.97)
1800
(70.8)
61.7
(2.43)
2100
(82.7)
(2.89)
(94.5)
Dimensions
Sensing head Electronics
73.4
2400
Further optics, D:S = 45:1
... SF 27 mm @ 1250 mm
... CF1 1.6 mm @ 70 mm
... CF2 3.4 mm @ 150 mm
... CF3 4.5 mm @ 200 mm
mm
(in)
mm
(in)
... CF4 10 mm @ 450 mm
(1.06 in @ 49.2 in)
(0.06 in @ 2.76 in)
(0.13 in @ 5.91 in)
(0.18 in @ 7.87 in)
(0.39 in @ 17.7 in)
Accessories
Mounting angle, adjustable
in two axes (ACCTLAB)
Water cooling and air purge for
sensing head (ACCTLW + ACCTLAP)
Cooling housing
(ACCJCTL)
Mounting angle for cooling housing,
adjustable in two axes (ACCJAB)
Mounting device for cooling housing
(ACCTLRM)
Specications are subject to change without notice · CTlaser P7-US2018-08-A
Loading...