Optoway TRSL-9380F CXX0G Technical data
Optoway
1
length
查询TRSL-9380F-CXX0G供应商
***********************************************************************************************************************************************************************
TRSL-9380F –CXX0G
TRSL-9380F-CXX0G
3.3V / CWDM / 2.125 Gbps SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
l 18-Wavelength CWDM Transceivers
l Duplex LC Single Mode Transceiver
l Fibre Channel 2X/1X SM-LC-L FC-PI Compliant
l IEEE 802.3z Gigabit Ethernet Compliant
l Small Form Factor, RJ-45 size, 2X5 pin Package
l CWDM DFB LD Transmitter
l 23 dB Link Power Budget at Least
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l 0 to 70oC Operation
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
APPLICATIONS
l ATM Switches and Routers
l SONET / SDH Swithch Infrastructure
l XDSL Applications
l Metro Edge Switching
DESCRIPTION
The TRSL-9380F-CXX0G series single mode transceivers
is small form factor, low power, high performance CWDM
modules for bi-directional serial optical data
communications such as Fibre Channel 2X / 1X SM-LC-L
FC-PI and IEEE 802.3z Gigabit Ethernet 1000BASE-ZX.
There are eighteen center wavelengths available from 1270
nm to 1610 nm, each step 20 nm. A guaranteed minimum
optical link budget of 23 dB is offered. The transmitter
section uses a multiple quantum well CWDM DFB laser
and is a class 1 laser compliant according to International
Safety Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A PECL
logic interface simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No. Bit Rate
(Gb/s)
TRSL-9380F-CXX0G 2.125/1.063 200/100
CWDM Wavelength (0 to 70oC)
Central
Wavelength
-C270 1264.5 1270 1277.5 -C450 1444.5 1450 1457.5
-C290 1284.5 1290 1297.5 -C470 1464.5 1470 1477.5
-C310 1304.5 1310 1317.5 -C490 1484.5 1490 1497.5
-C330 1324.5 1330 1337.5 -C510 1504.5 1510 1517.5
-C350 1344.5 1350 1357.5 -C530 1524.5 1530 1537.5
-C370 1364.5 1370 1377.5 -C550 1544.5 1550 1557.5
-C390 1384.5 1390 1397.5 -C570 1564.5 1570 1577.5
-C410 1404.5 1410 1417.5 -C590 1584.5 1590 1597.5
-C430 1424.5 1430 1437.5 -C610 1604.5 1610 1617.5
CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm.
Min.
(nm)
FC-PI Power
Budget
(dB)
> 23 CWDM* 2X5 LC 0 to 70 5 to 0 -23 Yes
Typ.
(nm)
Max.
(nm)
Wave
(nm)
Wavelength
Package Temp.
Central
(oC)
Min.
(nm)
TX Power
(dBm)
Typ.
(nm)
RX Sens.
(dBm)
RoHS
Compliant
Max.
(nm)
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V3.0
Optoway
2
*********************************************************************************************************************************************************************
TRSL-9380F –CXX0G
Absolute Maximum Ratings
Parameter Symbol Min Max Units Notes
Storage Temperature Tstg -40 85
Operating Temperature Topr 0 70
Soldering Temperature --- 260
Power Supply Voltage Vcc 0 4.5 V
Input Voltage --- GND Vcc V
Output Current Iout 0 30 mA
o
C
o
C With air flow 1m/sec
o
C 10 seconds on leads only
Recommended Operating Conditions
Parameter Symbol Min Typ Max Units / Notes
Power Supply Voltage Vcc 3.13 3.3 3.47 V
Operating Temperature Topr 0 70
Data Rate 1063 2125 Mb/s
Power Supply Current Icc 200 300 mA
o
C / air flow 1m/sec
Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter Symbol Min Typ Max Units Notes
Optical
Optical Transmit Power Po 0 --- 5 dBm 1
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio SMSR 30 dB
Extinction Ratio ER --- 9 --- dB
Optical Rise Time tr 160 ps 20% to 80% Values
Optical Fall Time tf 160 ps 20% to 80% Values
Relative Intensity Noise RIN -120 dB/Hz
Electrical
Data Input Current – Low IIL -350 µA
Data Input Current – High IIH 350 µA
Differential Input Voltage VIH - VIL 300 mV
Data Input Voltage – Low VIL - VCC -2.0 -1.58 V 3
Data Input Voltage -- High VIH - VCC -1.1 -0.74 V 3
Disable Input Voltage -- Low V
Disable Input Voltage -- High V
Shut Off Time for TxDis t
Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber.
2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm.
3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
λ
∆λ
0 0.5 V TX Output Enabled
TDIS,L
Vcc – 1.3
TDIS,H
1 ms
DIS
λ-5.5
--- 1 nm -20 dB Width
λ
Vcc V TX Ouput Disabled
λ+7.5 nm 2
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V3.0
Loading...