Optoway
1
Wavelength
查询TRSL-3380W-CXX0G供应商
TRSL-3380W-CXX0G
***********************************************************************************************************************************************************************
TRSL-3380W-CXX0G
3.3V / CWDM / 155 Mbps SFF 2X10 LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
l Duplex LC Single Mode Transceiver
l SONET OC-3 LR-2 / SDH STM-1 (L-1.2) Compliant
l Small Form Factor, RJ-45 size, 2X10 pin Package
l 18-Wavelength CWDM DFB LD Transmitter from
1270 nm to 1610 nm, with step 20 nm
l 29 dB Link Budget at Least
l Analog Monitor Function
-- Transmitter Laser Bias Current
-- Transmitter Laser Optical Power Monitor
-- Receiver Photo Detector Current
l LVPECL Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l 0 to 70oC Operation
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
Compliant
APPLICATIONS
l ATM 155 Mbps Links
l SONET/SDH Equipment Interconnect
l Fast Ethernet 100 Mb/s Links
DESCRIPTION
The TRSL-3380W-CXX0G series single mode transceivers
is low power, high performance CWDM modules for
bi-directional serial optical data communications such as
long-reach SONET OC-3 LR / SDH STM-1 and Fast
Ethernet. There are eighteen center wavelengths available
from 1270 nm to 1610 nm, each step 20 nm. A guaranteed
minimum optical link budget of 29 dB is offered. The
transmitter section uses a multiple quantum well DFB
laser and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
section uses an integrated InGaAs detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC. A PECL logic interface simplifies
interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No. Bit Rate
(Mb/s)
TRSL-3380W-CXX0G 155 LR-2/L-1.2 ≥ 29 CWDM* 2X10 LC 0 to 70 0 to -5 -34 Yes
CWDM Wavelength (0 to 70oC)
Central
Wavelength
-C270 1264.5 1270 1277.5 -C450 1444.5 1450 1457.5
-C290 1284.5 1290 1297.5 -C470 1464.5 1470 1477.5
-C310 1304.5 1310 1317.5 -C490 1484.5 1490 1497.5
-C330 1324.5 1330 1337.5 -C510 1504.5 1510 1517.5
-C350 1344.5 1350 1357.5 -C530 1524.5 1530 1537.5
-C370 1364.5 1370 1377.5 -C550 1544.5 1550 1557.5
-C390 1384.5 1390 1397.5 -C570 1564.5 1570 1577.5
-C410 1404.5 1410 1417.5 -C590 1584.5 1590 1597.5
-C430 1424.5 1430 1437.5 -C610 1604.5 1610 1617.5
CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm.
Min.
(nm)
SDH/
SONET
Typ.
(nm)
Power
Budget
(dB)
Max.
(nm)
(nm)
Package Temp.
Central
Wavelength
(oC)
Min.
(nm)
TX Power
(dBm)
Typ.
(nm)
RX Sens.
(dBm)
RoHS
Compliant
Max.
(nm)
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V3.0
Optoway
2
***********************************************************************************************************************************************************************
TRSL-3380W-CXX0G
Absolute Maximum Ratings
Parameter Symbol Min Max Units Notes
Storage Temperature Tstg -40 85
Operating Temperature Topr 0 70
Soldering Temperature --- 260
Power Supply Voltage Vcc 0 4.5 V
Input Voltage --- GND Vcc V
Output Current Iout 0 30 mA
o
C
o
C With air flow 1m/sec
o
C 10 seconds on leads only
Recommended Operating Conditions
Parameter Symbol Min Typ Max Units / Notes
Power Supply Voltage Vcc 3.13 3.3 3.47 V
Operating Temperature Topr 0 70
Data Rate 125 / 155 200 Mb/s
Power Supply Current Icc 200 280 mA
o
C / air flow 1m/sec
Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter Symbol Min Typ Max Units Notes
Optical
Optical Transmit Power Po -5 --- 0 dBm 1
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio SMSR 30 dB
Extinction Ratio ER 10 --- --- dB
Output Eye Compliant with Bellcore GR-253-CORE and ITU recommendation G.957
Optical Rise Time tr 2 ns 10% to 90% Values
Optical Fall Time tf 2 ns 10% to 90% Values
Relative Intensity Noise RIN -120 dB/Hz
Total Jitter TJ 1 ns 3
Electrical
Data Input Current – Low IIL -350 µA
Data Input Current – High IIH 350 µA
Differential Input Voltage VIH - VIL 300 mV
Data Input Voltage – Low VIL - VCC -2.0 -1.58 V 4
Data Input Voltage -- High VIH - VCC -1.1 -0.74 V 4
Disable Input Voltage -- Low V
Disable Input Voltage -- High V
Shut Off Time for TxDis t
Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber.
2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm.
3. Measured with a 223-1 PRBS with 72 ones and 72 zeros.
4. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
λ
∆λ
0 0.5 V TX Output Enabled
TDIS,L
Vcc – 1.3
TDIS,H
1 ms
DIS
λ-5.5
--- --- 1 nm -20 dB Width
λ
Vcc V TX Ouput Disabled
λ+7.5 nm 2
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V3.0
Optoway
3
control
circuit
***********************************************************************************************************************************************************************
TRSL-3380W-CXX0G
Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter Symbol Min Typ Max Units Notes
Optical
Sensitivity --- --- --- -34 dBm 1
Maximum Input Power Pin -3 --- dBm
Signal Detect -- Asserted Pa --- --- -34 dBm Transition: low to high
Signal Detect -- Deasserted Pd -47 --- --- dBm Transition: high to low
Signal detect -- Hysteresis 1.0 --- dB
Wavelength of Operation 1100 --- 1620 nm
Electrical
Data Output Voltage – Low VOL - VCC -2.0 -1.58 V 2
Data Output Voltage – High VOH - VCC -1.1 -0.74 V 2
Signal Detect Output Voltage -- Low
Signal Detect Output Voltage -- High
Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 223-1 PRBS with 72 ones and 72 zeros.
2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.
VOL 0.5 V
VOH 2.0 V
ANALOG DIAGNOSTICS FUNCTIONS
Parameter Symbol Min Typ Max Units Notes
Transmitter
Laser Bias Current Monitor Bmon+, BmonMonitor Photodiode Current Monitor Pmon+,Pmon-
Receiver
Received Photocurrent Rpd 0 1 mA 3
Photodiode Responsivity R 0.5 0.9 1.0 A/W
Applied Voltage at VpdR pin Vpd 2.4 Vcc V 3
Notes: 1. PIN 17 and 18 provide an analog voltage output proportional to the laser bias current, based on the following
formula: Ibias = V (Bmon+ - Bmon-) / 10 Ω. See below the equivalent circuit.
2. PIN 19 and 20 provide an analog voltage output proportional to the monitor photodiode current, based on the
following formula: Imon = V (Pmon+ - Pon-) / 200Ω. See below the equivalent circuit.
3. PIN 1 is used to monitor the received photocurrent. It must be connected to a positive voltage within the specified
above. The received power is given by the photocurrent multiplied by the photodiode responsivity.
VCC
0 Vcc V 1
0 Vcc V 2
VCC
I bias
bias
10ohm
LD
3K
3K
BM+
BM-
I mon
circuit
Monitor PD
200ohm
3K
3K
Pmon+
Pmon-
Vpdr
RX PD
I pd
T
Analog Monitoring Function Connections
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V3.0
Optoway
4
Receiver power monitor. This pin must be
connected to a positive power supply (Vcc),
preferably via a small resistor. Supplier
sed to monitor receiver
***********************************************************************************************************************************************************************
TRSL-3380W-CXX0G
CONNECTION DIAGRAM
PIN Symbol
Notes PIN Symbol
1 VpdR
photocurrent and maybe u
power.
2 VeeR
3 VeeR
4
5
6 VeeR
7 VccR
8
9 RD−
10 RD+
Receiver ground.
Receiver ground.
No connected
NC
No connected
NC
Receiver ground.
+3.3V dc receiver power supply
Signal detect. Logic 1 indicate a normal operation.
SD
Receiver Dataout Bar
Receiver Dataout
MS MS Mounting Studs. Connect to Chassis Ground
RECOMMENDED CIRCUIT SCHEMATIC
Tdis(LVTTL)
BmonBmon+
PmonPmon+
12
13
14
15
16
17
18
19
20
TD-
Tdis
TX
RX
Pmon+
VpdR1VeeRX2VeeRX3NC4NC5VeeRX6VccRX7SD8RD-9RD+
TD+
Pmon-
Bmon-
Bmon+
VccTX11VeeTX
VeeTX
10
11 VccT
12 VeeT
13 T Dis
14 TD +
15 TD −
16 VeeT
17 Bmon−
18 Bmon+
19 Pmon20 Pmon+
MICROSTRIP1
Z=50R
MICROSTRIP2
Z=5OR
1uH
100nF 10uF100nF
1uH
100nF
10uF
Notes
+3.3V dc transmitter power supply
Transmitter ground.
Transmitter Disable. Connect this pin to logic “1”
to disable module. To enable module connect to
logic low “0”
Transmitter Data In
Transmitter Data In Bar
Transmitter ground.
Laser Bias Monitoring – Negative End
Laser Bias Monitoring – Positive End
(Bmon+ - Bmon-) = 10 Ω X laser bias current
Laser Power Monitoring -- Negative end
Laser Power Monitoring -- Positive end
(Pmon+ - Pmon-) = 200 Ω X monitor photdiode
current
Vcc3.3V
TD-
LVPECL
PHY DEVICE
Vcc3.3V
Vcc3.3V
TD+
150ohm150ohm
VCC3.3V
Vcc3.3V
130R
RD+
VCCRX(3.3V)
200R
Vpdr
Note: 1. TX input is terminated inside the module.
2. Veer and Veet are not internally connected to each other.
3. 50 Ω line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for better impedance
matching.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V3.0
MICROSTRIP3
10nF
3K
1K
Z=50R
MICROSTRIP4
Z=5OR
TO LVPECL STAGE
82R
130R
RD-
82R
LVPECL
SD
Optoway
5
***********************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
1) Standard Case
TRSL-3380W-CXX0G
TRSL-3380W-CXX0G
2) Extended Case
TRSL-3380WE-CXX0G
Note: Specifications subject to change without notice.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V3.0
Loading...