Optoma W303ST, DX5100 User Manual

CONTENTS

Usage Notice .....................................................................................2

Safety Instructions ................................................................................................................. 2

Introduction .......................................................................................5

Projector Features ................................................................................................................. 5

Package Contents ................................................................................................................. 6

Projector Overview ................................................................................................................ 7

Using the Product .............................................................................9

Control Panel ......................................................................................................................... 9

Connection Ports ................................................................................................................. 10

Remote Control ................................................................................................................... 12

Installing the Batteries ......................................................................................................... 15

Remote Control Operation ................................................................................................... 16

Connection ......................................................................................17

Connecting a computer or monitor ...................................................................................... 18

Connecting Video source devices ....................................................................................... 20

Operation .........................................................................................23

Powering On/Off the Projector ............................................................................................. 23

Adjusting the Projector Height ............................................................................................. 24

Adjusting the Projector Zoom and Focus ............................................................................ 24

Adjusting Projection Image Size .......................................................................................... 25

Menu Operation ................................................................................................................... 26

Appendix ..........................................................................................42

Installing the Dust Filter ....................................................................................................... 42

Replacing the Lamp .............................................................................................................43

Ceiling mount installation .....................................................................................................45

Compatibility Modes ............................................................................................................46

RS232 Commands and Protocol Function List .................................................................... 50

Troubleshooting ................................................................................................................... 56

Optoma Global Offices ........................................................................................................ 58

Regulation & Safety Notices ................................................................................................ 61

EN-1

Usage Notice

Safety Instructions

Read all of these instructions before you operate your projector and save for future reference.

1. Read instructions All the safety and operating instructions should be read before the appliance is operated.

2. Notes and warnings All notes and warnings in the operating instructions should be adhered to.

3. Cleaning Unplug the projector from the wall socket before cleaning. Use a damp cloth for cleaning the projector housing. Do not use liquid or aerosol cleaners.

4. Accessories Do not place this product on an unstable cart, stand, or table. The product may fall, Keep the plastic packing materials (from the projector, accessories and optional parts) out of the reach of children as these bags may result in death by suffocation. Be particularly careful around the small children.

5. Ventilation The projector is equipped with ventilation holes (intake) and ventilation holes (exhaust). build-up may occur, projector.

6. Power sources Check that the operating voltage of your unit is identical with the voltage of your local

7. Servicing Do not attempt to service this projector yourself. Refer all servicing to qualified service personnel.

8. Replacement parts When replacement parts are required, be sure that the replacement parts are result in fire, electric

causing serious damage to the product.

Do not block or place anything near these slots, or internal heat

causing picture degradation or damage to the

power supply.

specified by the manufacture. Unauthorized substitutions may

shock or other hazards.

EN-2

9. Moisture Condensation Never operate this projector immediately after moving it from a cold location to a warm one. When the projector is exposed to such a change in temperature, moisture may condense on the lens and the crucial internal parts. To prevent the unit from possible damage, do not use the projector for at least 2 hours when there is an extreme or sudden change in temperature.

EN-3

Notes on the AC Power Cord

AC Power Cord must meet the requirement of countries where you use this projector. Please confirm your AC plug type with the graphics below and ensure that the proper AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet, please contact your sales dealer. This projector is equipped with a grounding type AC line plug. Please ensure that your outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We highly recommend using a video source device also equipped with a grounding type AC line plug to prevent signal interference due to voltage fluctuations.

Ground

For Australia and Mainland China

Ground

For Continental Europe

Ground

For the U.S.A. and Canada

Ground

For the U.K.

EN-4

Introduction

Projector Features

The projector integrates high-performance optical engine projection and a user

- friendly The projector offers the following features:

 Single chip 0.55" Texas Instruments DLP

 Single chip 0.65" Texas Instruments DLP  SVGA (800 x 600 pixels)  XGA (1024 x 768 pixels)  WXGA (1280 x 800 pixels)

 Compatibility with Macintosh  Compatibility with NTSC, PAL, SECAM and HDTV  D-Sub 15-pin terminal for analog video connectivity  User-friendly, multi-language on-screen display  Advanced electronic keystone correction  RS-232 connector for serial control  Quick Resume feature

 Eco  Full 3D

design to deliver high reliability and ease of use.

technology (SVGA/XGA

model)

technology (WXGA model)

computers

mode for more economic usage

Note



The information in this manual is subject to change without notices.



The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent.

EN-5

Package Contents

When you unpack the projector, make sure you have all these components:

(Lens Cap depending on

Dust filter (depending on

Documentation:

Projector

region)

Remote Control (IR) or Remote Control with Laser Pointer (depending on region) & batteries (AAA *2

PCS)

region)

AC Power Cord VGA Cable (D-SUB to D-SUB)

Screw & Washer

(depending on region)

5User's Manual 5Warranty Card

Carry Bag (optional for certain

models)

5Quick Start Card 5WEEE Card

(for EMEA only)

Note



For European warranty information please visit www.optomaeurope.com



Due to the difference in applications for each country, some regions may have different accessories.



Contact your dealer immediately if any items are missing, appear damaged, or if the unit does

not work



Save the original shipping carton and packaging material; they will come in handy if you ever need to ship your unit. For maximum protection, repack your unit as it was originally packed at the factory.

EN-6

Projector Overview

Front View

Airflow Out

1 6

Front IR remote control sensor

2 7

Elevator foot Zoom ring

Projection lens Control panel

4 9

Focus ring Lamp cover

Speaker

Ventilation holes

Airflow In

EN-7

Rear View

Without HDMI models HDMI models

AC power socket Connection ports

Kensington lock

Bottom View

1 2

Security bar

Ceiling mount holes

Note



This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package.



Contact your dealer for information to mount the projector on a ceiling.

EN-8

Using the Product

Control Panel

Keystone ( / )

Manually correct distorted images resulting from an angled projection.

TEMP (Temp LED indicator) Refer to “LED Indicator Messages” on page 57.

SOURCE

Switch between input signals.

POWER (Power LED indicator) Refer to “LED Indicator Messages” on page 57.

Power

Turn the projector on or off.

HELP

Display Help menu.

LAMP (Lamp LED indicator) Refer to “LED Indicator Messages” on page 57.

ENTER

Confirm your item selection.

Re-SYNC

Automatically synchronize the projector to the input source.

Four directional buttons

Use four directional buttons to select items or make adjustments to your selection.

Display or exit the on-screen display menus.

EN-9

Connection Ports

AUDIO-IN 1

Connect an audio output from a computer to this jack connector.

S-VIDEO

Connect S-Video output from video equipment to this jack.

VGA1/YPbPr

Connect image input signal (analog RGB or component) to this jack.

VGA-OUT

Connect to an external monitor. In Eco mode (Standby), VGA-OUT is disabled. In Active mode (Standby), VGA-OUT is enabled.

HDMI

Connect HDMI output from video equipment to this jack. (This function is only available for products with HDMI input jack.)

RS-232C

When operating the projector via a computer, connect this to the controlling computer's RS-232C port.

Service/Mouse

This connector supports firmware update, remote mouse and page up/ down.

VGA2-IN/YPbPr

Connect image input signal (analog RGB or component) to this jack.

VIDEO

Connect composite video output from video equipment to this jack.

EN-10

AUDIO-OUT

Connect to an external speaker system. Audio loop through is supported from Audio 1, 2 and HDMI. In Eco mode (Standby), AUDIO-OUT is disabled. In Active mode (Standby), AUDIO-OUT is enabled.

AUDIO-IN 2

Connect an audio output from a video device to this jack connector.

EN-11

Remote Control

2 3

5 6 7

8 9

10 11 12

18a

19 20 21 22 23 24 25 26

Remote control varies based on region.

10 11 12

2 3

5 6 7

8 9

18b

19 20 21 22 23 24 25 26

Power

Turn the projector on or off.

Source

Switch between input signals.

Left mouse

Perform the left button of the mouse when mouse mode is activated.

EN-12

Four directional buttons

Use four directional buttons to select items or make adjustments to your selection. "UP" key: When menu is off, up key for emulation of USB mouse. "Left" key: When menu is off, left key for emulation of USB mouse. "Right" key: When menu is off, right key for emulation of USB mouse. "Down" key: When menu is off, down key for emulation of USB mouse.

Page-

Perform page down function when mouse mode is activated.

Keystone (+/-) Manually correct distorted images resulting from an angled projection.

Brightness

Display the setting bar for adjustment of brightness.

Freeze

Freeze the projected image.

HDMI

Display HDMI signal. (This function will not work if product does not have HDMI.)

S-Video

Display S-Video signal.

Eco+

Brightness mode menu on/off.

VGA

Switch input source to VGA1 or VGA2 by sequence.

Switch

Switch to mouse mode when the on-screen menus are close.

User

User definable key for customized function.

Re-SYNC

Automatically synchronize the projector to the input source.

Right mouse

Perform the right button of the mouse when mouse mode is activated.

Enter

Confirmed selections. Enter key for emulation of USB mouse via USB.

18a

Mode

Display mode menu on/off.

Laser

18b

Aim the remote at the viewing screen, press and hold this button to activate the laser pointer.

Page+ Perform page up function when mouse mode is activated.

EN-13

Volume (+/-)

Adjust the volume level.

Display on-screen display menus.

Zoom

Magnifies or reduces the projected picture size.

AV mute

Momentarily turns off/on the audio and video.

Video

Display video signal.

Turn on or off 3D function.

USB

Switch to mouse mode when the on-screen menus are close.

Numbered keypad

Press 0 to 9 to enter a password when required.

Note



Remote Control (IR) or Remote Control with Laser Pointer (depending on region). See Appendix for the Remote with Laser Pointer.

Using the remote mouse control

The capability of operating your computer with the remote control gives you more flexibility when delivering presentations.

1. Connect the projector to your PC or notebook with a USB cable prior to using the remote control in place of your computer’s mouse. See

“Connecting a computer” on page 18 for details.

2. Set the input signal to

3. Press

USB or Switch

when the on-screen menus are close. indicate the activation of the mouse mode.

4. Perform the desired mouse controls on your remote control.

 To move the cursor on the screen, press / / / .  To left-click, press L.  To right-click, press R.  To return to the normal mode, press Switch again.

VGA1

VGA2

on the remote control to

An icon appears on the screen to

switch to mouse mode

Note



HDMI also supports mouse function.

EN-14

Installing the Batteries

1. Open the battery cover in the direction shown.

2. Install batteries as indicated by the diagram inside the compartment.

3. Close the battery cover into position.

Caution



Risk of explosion if battery is replaced by an incorrect type.



Dispose of used batteries according to the instructions.



Make sure the plus and minus terminals are correctly aligned when loading a battery.

Note



Keep the batteries out of the reach of children. There is a danger of death by accidentally swallowing the batteries.



Remove batteries from remote control when not using for extended periods.



Do not dispose of the used batteries along with household waste. Dispose of used batteries according to local regulations.



Danger of explosion may happen if batteries are incorrectly replaced. Replce all the batteries with new ones.



Batteries should not be in or near to fire or water, keep batteries in a dark, cool and dry place.



If suspect battery leakage, wipe out the leakage and then replace new batteries. If the leakage adheres to your body or clothes, rinse well with water immediately.

EN-15

Remote Control Operation

Point the remote control at the infrared remote sensor and press a button.

 Operating the projector

from the front

Note

 The remote control may not operate when there is sunlight or other strong light such as a

fluorescent lamp shining on the remote sensor.

 Operate the remote control from a position where the remote sensor is visible.  Do not drop the remote control or jolt it.  Keep the remote control out of locations with excessively high temperature or humidity.  Do not get water on the remote control or place wet objects on it. 

Do not disassemble the remote control.

EN-16

Connection

When connecting a signal source to the projector, be sure to:

1. Turn all equipment off before making any connections.

2. Use the correct signal cables for each source.

3. Ensure the cables are firmly inserted.

6 7

1. ............................................................................................*Audio cable

2. .........................................................................................*S-Video cable

3. .......................................................................... *Composite Video cable

4. .......................................................*VGA (D-Sub) to HDTV (RCA) cable

5. ............................................................................................*HDMI cable

6. .................................................................. VGA cable (D-Sub to D-Sub)

7. ..............................................................................................*USB cable

8. .................................................................................*VGA to DVI-A cable

Note



Due to the difference in applications for each country, some regions may have different accessories.



(*) Optional Accessory

EN-17

Connecting a computer or monitor

Connecting a computer

The projector provides two VGA input sockets that allow you to connect them to both IBM needed if you are connecting legacy version Macintosh computers.

To connect the projector to a notebook or desktop computer:

1. Take the supplied VGA cable and connect one end to the D-Sub output socket of the computer.

2. Connect the other end of the VGA cable to the VGA1/YPbPr or VGA2/

YPbPr signal input socket on the projector.

Important



Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key simultaneously. Refer to your notebook's documentation to find your notebook's key combination.

compatible and Macintosh® computers. A Mac adapter is

Many notebooks do not turn on their external video ports when connected to a projector.

EN-18

Connecting a monitor

If you want to view your presentation close-up on a monitor as well as on the screen, you can connect the VGA-OUT signal output socket on the projector to an external monitor with a VGA cable following the instructions below:

To connect the projector to a monitor:

1. Connect the projector to a computer as described in “Connecting a

computer” on page 18.

2. Take a suitable VGA cable (only one supplied) and connect one end of the cable to the D-Sub input socket of the video monitor. Or if your monitor is equipped with a DVI input socket, take a VGA to DVI-A cable and connect the DVI end of the cable to the DVI input socket of the video monitor.

3. Connect the other end of the cable to the VGA-OUT socket on the projector.

VGA-out loop through:

During working mode:

1. If VGA1 is projecting out, VGA-OUT source will be VGA1.

2. If VGA2 is projecting out, VGA-OUT source will be VGA2.

3. If VGA1 and VGA2 are all have sources, default VGA-OUT is VGA1.

4. If none of VGA1 and VGA2 is projecting out, VGA-OUT is disabled.

During Standby

1. VGA-OUT will keep the latest display VGA source signal. Default VGAOUT is VGA1.

2. If the projector is in Power Mode (Standby) < 0.5W, VGA-OUT is disabled.

EN-19

Connecting Video source devices

You can connect your projector to various Video source devices that provide any one of the following output sockets:

 HDMI  Component Video  S-Video  Video (composite)

You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the projector and the Video source device as described below:

Terminal name Terminal appearance Reference Picture quality

HDMI HDMI “Connecting an

HDMI source

device” on

page 21

Component

Video

VGA1/YPbPr or

VGA2/YPbPr

“Connecting a Component Video source device” on

page 21

S-Video S-VIDEO “Connecting an

S-Video source

device” on

page 22

Video VIDEO “Connecting a

composite Video

source device” on

page 22

Best

Better

Good

Normal

Note



Not all models have HDMI Input, please check your projector before connecting

EN-20

Connecting an HDMI source device

Examine your Video source device to determine if it has a set of unused HDMI output jacks available:

 If so, you can continue with this procedure.  If not, you will need to reassess which method you can use to connect to

the device.

To connect the projector to an HDMI source device:

1. Take an HDMI cable and connect one end to the HDMI output jack of the HDMI source device.

2. Connect the other end of the HDMI cable to the

HDMI

jack on the

projector.

Connecting a Component Video source device

Examine your Video source device to determine if it has a set of unused Component Video output sockets available:

 If so, you can continue with this procedure.  If not, you will need to reassess which method you can use to connect to

the device.

To connect the projector to a Component Video source device:

1. Take a VGA (D-Sub) to HDTV (RCA) cable and connect the end with 3 RCA type connectors to the Component Video output sockets of the Video source device. Match the color of the plugs to the color of the sockets; green to green, blue to blue, and red to red.

2. Connect the other end of the cable (with a D-Sub type connector) to the

VGA1/YPbPr

VGA2/YPbPr

socket on the projector.

Important



If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.

EN-21

Connecting an S-Video source device

Examine your Video source device to determine if it has an unused S-Video output socket available:

 If so, you can continue with this procedure.  If not, you will need to reassess which method you can use to connect to

the device.

To connect the projector to an S-Video source device:

1. Take an S-Video cable and connect one end to the S-Video output socket of the Video source device.

2. Connect the other end of the S-Video cable to the

S-VIDEO

socket on the

projector.

Important



If you have already made a Component Video connection between the projector and this S-Video source device using Component Video connections, you need not connect to this device using an S-Video connection as this makes an unnecessary second connection of poorer picture quality. See “Connecting Video source devices” on page 20 for details.

Connecting a composite Video source device

Examine your Video source device to determine if it has a set of unused composite Video output sockets available:

 If so, you can continue with this procedure.  If not, you will need to reassess which method you can use to connect to

the device.

To connect the projector to a composite Video source device:

1. Take a Video cable and connect one end to the composite Video output socket of the Video source device.

2. Connect the other end of the Video cable to the projector.

VIDEO

socket on the

EN-22

Important



You need only connect to this device using a composite Video connection if Component Video and S-Video inputs are unavailable for use. See “Connecting Video source

devices” on page 20 for details.

Operation

Powering On/Off the Projector

Powering On the Projector:

1. Connect the AC power cord and relevant peripheral signal cable(s) to the projector.

2. Press to turn on the projector. The projector takes a minute or so to warm up.

3. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects your source.

 If you are connecting multiple sources to the projector

simultaneously, press SOURCE on the projector or Source on the remote control to select your desired signal or press your desired signal key on the remote control.

Warning



Never look into the lens when the lamp is on. This can damage your eyes.



This focal point concentrates high temperature. Do not place any object near it to avoid possible fire hazard.

Powering Off the Projector:

1. Press to turn off the projector lamp. You will see a message off? Press Power again"

appear on the screen.

2. Press again to confirm.

 The cooling fans continue to operate for cooling cycle.  When

the Power LED becomes steady red, the projector has entered

stand-by mode.

 If you want to turn the projector back on, you must wait until the

projector has completed the cooling cycle and has entered stand-by mode. Once in stand-by mode, simply press to restart the projector.

3. Disconnect the AC power cord from the electrical outlet and the projector.

4. Do not turn on the projector right after power off.

Warning



When Quick Resume is on, if turning off the projector accidentally and Quick Resume selected within a period of 100 seconds, the projector will instantly power on again.



When Quick Resume is off, if turning off the projector, users need to wait until the cooling process is finished and then restart the projector. It will take a few minutes because the fan will keep running until the internal temperature is reduced to certain level.

"Power

EN-23

Adjusting the Projector Height

Tilt-adjustment foot

Elevator foot

The projector is equipped with an elevator foot to adjust the image height.

1. To raise or lower the image, turn the elevator foot.

2. To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height.

Note



To avoid damaging the projector, make sure that the elevator foot and tilt-adjustment foot are fully retracted before placing the projector in its carrying case.

Adjusting the Projector Zoom and Focus

Zoom ring

Focus ring

1. Focus the image by rotating the focus ring. A still image is recommended for focusing.

2. Adjust the image size by rotating the zoom ring.

EN-24

Adjusting Projection Image Size

Refer to the graphic and table below to determine the screen size and projection distance.

Maximum zoom

Minimum zoom

Screen

Center of lens

Vertical offset

Projection distance

SVGA/XGA model

Screen size

Diagonal

[inch (cm)]

30 (76) 3.83 (1.17) 4.33 (1.32) 18 (46) 2.7 (7) 40 (102) 5.17 (1.57) 5.75 (1.75) 24 (61) 3.6 (9) 60 (152) 7.83 (2.39) 8.67 (2.64) 36 (91) 5.4 (14) 80 (203) 10.42 (3.18) 11.58 (3.53) 48 (122) 7.2 (18)

100 (254) 13.08 (3.99) 14.58 (4.45) 60 (152) 9.0 (23) 120 (305) 15.75 (4.80) 17.5 (5.33) 72 (183) 10.8 (27) 150 (381) 19.67 (5.99) 21.83 (6.65) 90 (229) 13.5 (34) 200 (508) 26.25 (8.00) 29.17 (8.89) 120 (305) 18.0 (46) 250 (635) 32.83 (10.00) 36.5 (11.13) 150 (381) 22.5 (57) 300 (762) 39.42 (12.01) 43.75 (13.34) 180 (457) 27.0 (69)

Projection distance [feet (m)]

(min. zoom) (max. zoom)

4 : 3 Screen

Image height

[inch (cm)]

Vertical offset

[inch (cm)]

WXGA model

Screen size

Diagonal

[inch (cm)]

30 (76) 3.08 (0.94) 3.92 (1.19) 16 (40) 2.4 (6) 40 (102) 4.12 (1.27) 5.17 (1.57) 21 (54) 3.2 (8) 60 (152) 6.33 (1.93) 7.83 (2.39) 32 (81) 4.8 (12) 80 (203) 8.42 (2.57) 10.5 (3.20 42 (108) 6.4 (16)

100 (254) 10.58 (3.23) 13.08 (3.99) 53 (135) 7.9 (20) 120 (305) 12.75 (3.89) 15.75 (4.80) 64 (162) 9.5 (24) 150 (381) 15.92 (4.85) 19.67 (5.99) 79 (202) 11.9 (30) 200 (508) 21.25 (6.48) 26.25 (8.00) 106 (269) 15.9 (40) 250 (635) 26.58 (8.10) 32.83 (10.01) 132 (336) 19.9 (50) 300 (762) 31.92 (9.73) 39.42 (12.01) 159 (404) 23.8 (61)

Projection distance [feet (m)]

(min. zoom) (max. zoom)

16:10 Screen

Image height

[inch (cm)]

Vertical offset

[inch (cm)]

Note



Position the projector in a horizontal position; other positions can cause heat build-up and damage to the projector.



Keep a space of 30 cm or more between the sides of the projector.



Do not use the projector in a smoky environment. Smoke residue may build-up on critical parts and damage the projector or its performance.



Consult with your dealer for special installation such as suspending from a ceiling.

EN-25

Menu Operation

The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings.

How to operate

1. To open the OSD menu, press “Menu” on the Remote Control or Projector Keypad.

2. When OSD is displayed, use / key to select to select any item in the main menu. While making a selection on a particular page, press “Enter key to enter sub menu.

3. Use / key to select the desired item and press / /”Enter” key to enter the Single-Item-Menu.

4. Use the / key to adjust the value. Use “Enter” to confirm the selection.

5. Select the next item to be adjusted in the sub menu and adjust as described above.

6. Press ”Menu” to go back to Sub-Menu.

7. To exit, press “Menu” again. The OSD menu will close and the projector will automatically save the new settings.

Main Menu

Sub-Menu

Single-ItemMenu

EN-26

Settings

Menu tree

Main Menu Sub-Menu Single-Item Menu

Display Mode

Brightness Contrast Sharpness Color Tint

Gamma

BrilliantColor™

Color Temp.

Color Settings Red

Green

Blue

IMAGE

Advanced

Color Space

Signal Automatic On / Off

Exit

Reset Yes / No

Cyan

Magenta

Yellow

White Red / Green / Blue Reset Exit

Phase (VGA) Frequency (VGA) H. Position (VGA) V. Position (VGA) Exit

Presentation / Bright / Movie / sRGB / Blackboard / User / 3D

Film / Video / Graphics / Standard

Warm / Medium / Cold

Hue / Saturation / Gain

Not HDMI Input: Auto / RGB / YUV

HDMI Input: Auto / RGB (0~255) / RGB (16~235) YUV

EN-27

DISPLAY

Format

Edge Mask Zoom

Image Shift

V Keystone

Language

Projection

SVGA / XGA: 4:3 / 16:9 / Native / Auto

WXGA: 4:3 / 16:9 or 16:10 / LBX / Native / Auto

H V

3D Mode DLP-Link / IR 3D--->2D 3D / L / R

3D Format

3D Sync Invert On / Off

Auto / SBS / Top and Bottom / Frame Sequential

SETUP

EN-28

Menu Location

Screen Type

Security

Projector ID

Audio Settings

Advanced

16: 10/16:9

Security On / Off Security Timer Month / Day / Hour Change Password Exit

Mute On / Off Volu me

Audio Input

Logo Default / Neutral Closed Captioning Off / CC1 / CC2 Exit

(WXGA)

Default / Audio 1 / Audio 2

OPTIONS

Input Source

Source Lock On / Off High Altitude On / Off Information Hide On / Off Keypad Lock On / Off

Test Pattern

IR Function On / Off

Background Color

Remote Settings

Direct Power On On / Off

Advanced

Lamp Settings

Optional Filter Settings

Reset Yes / No

Auto Power Off (min.) Sleep Timer (min.) Quick Resume On / Off Power Mode (Standby) Active / Eco Lamp Hour Lamp Reminder On / Off

Brightness Mode

Lamp Reset Yes / No Exit Optional Filter Installed Yes / No Filter Usage Hours Filter Reminder On / Off Filter Reset Yes / No Exit

VGA1 / VGA2 / Video / S-Video / HDMI*

None / Grid / White

Black / Red / Blue / Green / White

Display Mode/ Format/ 3D Sync Invert/ Mute/ Test Pattern/ VGA2

Bright / Dynamic /

Eco

* This function is only available for products with HDMI input jack.

EN-29

IMAGE

Display Mode

There are many factory presets optimized for various types of images.

 Presentation: Good color and brightness from PC input.  Bright: Maximum brightness from PC input.  Moive: For home theater.  sRGB: Standardised accurate color.  Blackboard: This mode should be selected to achieve optimum color

settings when projecting onto a blackboard (green).

 User: User’s settings.  3D: Recommended setting for 3D mode. Any further adjustments by the

user in 3D will be saved in this mode for further use.

Brightness

Brighten or darken the image.

Contrast

Set the difference between light and dark areas.

Sharpness

Sharpen or soften the image.

Color

Adjust a video image from black and white to fully saturated color.

EN-30

Tint

Shift colors toward red or green.

Note



“Color” and “Tint” functions are only supported under Video mode.

Advanced

Gamma

This allows you to choose a degamma table that has been fine-tuned to bring out the best image quality for the input.

 Film: for home theater.  Video: for video or TV source.  Graphics: for image source.  Standard: for PC or computer source.

BrilliantColor™

This adjustable item utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing true, more vibrant colors in picture. The range is from “1” to “10”. If you prefer a stronger enhanced image, adjust toward the maximum setting. For a smoother, more natural image, adjust toward the minimum setting.

Color Temp.

If set to cold temperature, the image looks more blue. (cold image) If set to medium temperature, the image maintains normal colorings for white. If set to warm temperature, the image looks more red. (warm image)

EN-31

Color Settings

Press / /“Enter” key to enter the next menu as below and then use / /

key to select color. Press “Enter” to finalize the selection.

 Red/Green/Blue/Cyan/Magenta/Yellow/White: Use / to toggle Hue/

Saturation/Gain and then use / to adjust the value.

 Reset: Choose “Yes” to return the factory default settings for color

adjustments.

Color Space

Select an appropriate color matrix type from AUTO, RGB or YUV.

Signal

 Automatic: Automatically selects the singal. If you use this function, the

Phase, frequency items are grayed out, and if Signal is not automatic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again.

 Phase: Synchronize the signal timing of the display with the graphic

card. If the image appears to be unstable or flickers, use this function to correct it.

 Frequency: Change the display data frequency to match the frequency

of your computer’s graphic card. Use this function only if the image appears to flicker vertically.

 H. Position: Adjust the image left or right within the projection area.  V. Position: Adjust the image up or down within the projection area.

Reset

Return the display parameters on IMAGE menu to the factory default settings.

EN-32

DISPLAY

Format

Use this function to choose your desired aspect ratio.

For SVGA/XGA models:

Source 480i/p 576i/p 1080i/p 720p PC

4:3 1024x768 center 16:9 1024x576 center Native Displays the original image without any scaling. Auto (Default) If source is 4:3, auto resize to 1024 x 768

For WXGA models:

16:9 or 16:10 depend on “Screen Type” setting. 16:10 Screen

16 : 10

screen

4:3 1066 x800 center 16:10 1280x800 center LBX 1280x960 center, then get the central 1280x800 image to display. Native 1:1 mapping

Auto (Default) Input source will be fit into 1280x800 display area and be kept its

If source is 16:9 auto resize to 1024 x 576 If source is 15:9 auto resize to 1024 x 614 If source is 16:10 auto resize to 1024 x 640

480i/p 576i/p 1080i/p 720p PC

centered

original aspect ratio. If source is 4:3, auto resize to 1066 x 800 If source is 16:9 auto resize to 1280 x 720 If source is 15:9 auto resize to 1280 x 768 If source is 16:10 auto resize to 1280 x 800

1:1 mapping display 1280 x 800

1280x720 Centered

1:1 mapping centred

EN-33

16:9 Screen

16 : 9 screen 480i/p 576i/p 1080i/p 720p PC

4:3 960x720 center 16:9 1280x720 center LBX 1280x960 center, then get the central 1280x720 image to display. Native 1:1 mapping

centered

Auto (Default) If this format is select, Screen type will auto become 16:9 (1280 x

720) If source is 4:3, auto resize to 960 x 720 If source is 16:9 auto resize to 1280 x 720 If source is 15:9 auto resize to 1200 x 720 If source is 16:10 auto resize to 1152 x 720

1:1 mapping display 1280 x 720

1280x720 Centered

1:1 mapping centred

Edge Mask

Edge Mask function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source.

Note



Each I/O has different setting of “Edge Mask”.



“Edge Mask” and “Zoom” can’t work at same time.

Zoom

Zoom in and out the images.

Image Shift

Shift the projected image position horizontally and vertically.

V Keystone

Adjust image distortion vertically. If the image looks trapezoidal, this option can help make the image rectangular.

Note



Keystone adjustment might affect the complete presentation of the OSD menu.

3D Mode

 DLP Link: Select “DLP Link” to use optimized settings for DLP Link 3D

glasses.

 IR: Select “IR” to use optimized settings for IR-based 3D glasses.

3D--->2D

 3D: Select 3D format.  L: Select left eye data.

EN-34

 R: Select right eye data.

3D Format

 SBS: Use this mode for “Side-by-side” format 3D content.  Top and Bottom: Use this mode for “Top and Bottom” format 3D content.  Frame Sequential: Use this mode for “Frame Sequential” format 3D

content.

3D Sync. Invert

 Press the “On” to invert left and right frame contents.  Press the “Off” for default frame contents.

EN-35

SETUP

Language

Select the language used by the on-screen menu. Press / /“Enter” key to enter the sub menu and then use the / / / key to select your preferred language. Press “Enter” to finalize the selection.

Projection

Adjust the picture to match the orientation of the projector: upright or upsidedown, in front of or behind the screen. Invert or reverse the image accordingly.

Menu Location

Choose the menu location on the display screen.

Screen Type (for WXGA model only)

Choose the screen type from16:10 or 16:9.

Security

 On: Choose “On” to use security verification when the turning on the

projector.

 Off: Choose “Off” to be able to switch on the projector without password

verification.

Security Timer

EN-36

Use this function to set the how long (Month/Day/Hour) the projector can be used. Once this time has elapsed you will be requested to enter your password again.

Change Password

 First time:

1. Press “Enter” to set the password.

2. The password has to be 4 digits.

3. Use number button on the remote to enter your new password and then press “Enter” key to confirm your password.

 Change Password:

1. Press “Enter” to input old password.

2. Use number button to enter current password and then press “Enter” to confirm.

3. Enter new password (4 digits in length) using the number buttons on the remote, then press “Enter” to confirm.

4. Enter new password again and press “Enter” to confirm.

 If the incorrect password is entered 3 times, the projector will

automatically shut down.

 If you have forgotten your password, please contact your local office

for support.

Note



Password default value is “1234” (first time).

Projector ID

ID definition can be set up by menu (range 0~99), and allow user control an individual projector by RS232.

Audio Settings

Mute

Cut off the sound temporarily.

Volume

Adjust the volume level.

Audio Input

Select audio input sources.

Advanced

EN-37

Logo

Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on.

 Default: The default startup screen.  Neutral: Neutral startup screen.

Closed Captioning

Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on.

 Off: select “Off” to turn off the closed captioning feature.  CC1:CC1 language: American English.  CC2:CC2 language (depending on the TV channel of the user):Spanish,

French, Portuguese, German, Danish.

EN-38

OPTIONS

Input Source

Use this option to enable / disable input sources. Press / /“Enter” key to enter the sub menu and select which sources you require. Press “Enter” to finalize the selection. The projector will not search for inputs that are not selected.

Source Lock

 On: The projector will only search current input connection.  Off: The projector will search for other signals if the current input signal is

lost.

High Altitude

When “On” is selected, the fans will spin faster. This feature is useful in high altitude areas where the air is thin.

Note



With dust filter installed, High Altitude mode must be turned on manually. Dust filter is Optional and may not be required in some regions.

Information Hide

 On: Choose “On” to hide the info message.  Off: Choose “Off” to show the “searching” message.

EN-39

Keypad Lock

When the keypad lock function is “On”, the control panel will be locked however, the projector can be operated by the remote control. By selecting “Off”, you will be able to reuse the control panel.

Note



To turn off the keypad lock, press and hold “Enter” key on top of the projector for 5 seconds.

Test Pattern

Display a test pattern. There are Grid, White pattern and None.

IR Function

Choose “On” to turn on the IR receiver. Choose “Off” to turn off the IR receiver.

Background Color

Use this feature to display a “Black”, “Red”, “Blue”, “Green” or “White”, screen when no signal is available.

Remote Settings

Allow user to define a short cut key on the remote control, and the function item is selected in OSD menu.

Advanced

Direct Power On

Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “ ” key on the

projector control panel or on the remote control.

Auto Power Off (min)

Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes).

Sleep Timer (min)

Sets the countdown timer interval. The countdown timer will start, with or without a signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes).

Quick Resume

If the projector is accidentally turned off, this feature allows the projector to be instantly powered on again within 100 seconds of power down.

Power Mode (Standby)

Set whether the VGA-OUT function works when the projector is in standby (powered off but connected to AC power).

EN-40

 Eco: The VGA-OUT function will not work when the projector is in

standby.

 Active: The VGA-OUT and AUDIO-OUT functions will work when the

projector is in standby.

Note



When Power mode (Standby) is set to Eco (<0.5W), the VGA output, Audio pass-through will be deactivated when the projector is in standby.

Lamp Settings

Lamp Hours

Display the projection time.

Lamp Reminder

Choose this function to show or to hide the warning message when the changing lamp message is displayed.

Brightness Mode

 Bright: Choose “Bright” to increase the brightness.  Dynamic: Choose “Dynamic“ to dim the projector lamp which will lower

power consumption and extend the lamp life by up to 133%.

 Eco+: Choose “Eco+” to dim the projector lamp which will automatically

detect the brightness level of the content and reduce lamp power consumption (up to 70 percent) during periods of inactivity.

Lamp Reset

Reset the lamp hour counter after replacing the lamp.

Optional Filter Settings

Optional Filter Installed

Choose “Yes” if an optional dust filter is installed.

Filter Usage Hours

Display the dust filter’s elapsed operating time (in hours).

Filter Reminder

Sets a filter reminder if timer is up.

Filter Reset

Reset the dust filter hour counter after replacing the dust filter.

Reset

Choose “Yes” to return the display parameters on all menus to the factory default settings.

EN-41

Appendix

Installing the Dust Filter

Be sure to follow the steps to install the dust filter.

1. Align the filter with these two hook positions (#1 & #2), then press it close to the projector from the left side to the right one.

2. Press the last hook position (#3) until it clicks.

dust filter

3. Turn on the projector, then press “Menu”, go to OPTIONS > Optional Filter > Optional Filter Installed and select “Yes”.

4. Clean the dust filter periodically.

The dust filter should be cleaned or replaced periodically (suggest after every 500 hours or 3 months of use). If it is not cleaned periodically, it can become clogged with dust and prevent the projector from being ventilated properly. This can cause over heating and damage the projector. If the projector is used in a dusty environment, be sure to cleaned or replaced the dust filter more frequently.

5. To remove the dust filter, take it apart from the upper-left side of the hook position.

6. Turn on the projector, then press “Menu”, go to OPTIONS > Optional Filter > Optional Filter Installed and select “No” when you pull out the dust filter and would not install it again.

EN-42

Replacing the Lamp

As the projector operates over time, the brightness of the projector lamp gradually decreases and the lamp becomes more susceptible to breakage. We recommend replacing the lamp if a warning message is displayed. Do not attempt to replace the lamp yourself. Contact the qualified service personnel for replacement.

Note



The lamp is extremely hot right after turning off the projector. If you touch the lamp, you may scald your finger. When you replace the lamp, wait for at least 45 minutes for the lamp to cool down.



Do not touch the lamp glass at any time. The lamp may explode due to improper handling, including the touching of the lamp glass.



Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other similar lamps.



A lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.



Wear protective gloves and eyeglasses when fixing or detaching the lamp.



Faster on-off-cycles will damage the lamp and reduce lamp life. Wait at least for 5 minutes to turn off the projector after powering on.



Do not operate the lamp in proximity to paper, cloth, or other combustible material nor cover it with such materials.



Do not operate the lamp in an atmosphere containing an inflammable substance, such as thinner.



Thoroughly ventilate the area or the room when operating the lamp in an oxygen atmosphere (in the air). If ozone is inhaled, it could cause headaches, nausea, dizziness, and other symptoms.



The inorganic mercury is involved in the lamp. If the lamp bursts, the mercury inside the lamp will be exposed. Leave the area immediately if the lamp shatters while being operated and ventilate the area for at least 30 minutes in order to avoid the inhalation of mercury fumes. Otherwise it could be harmful to user’s health.

EN-43

1. Turn off the projector.

2. Unplug the power cord.

3. Remove the screw in the side of the lamp cover. 1

4. Lift the cover. 2

5. Loosen the screws from the lamp module. 3

6. Raise the handle and pull out the lamp module slowly and carefully. 4

7. Insert the new lamp module into the projector and tighten the screws.

8. Replace the lamp cover and tighten the screw.

9. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp.

10. Reset the lamp hour. Refer to the “

OPTIONS > Lamp Settings

” menu.

Note



Dispose the used lamp according to local regulations.



Ensure that screws are tightened properly. Screws not tightened fully may result in injury or accidents.



Since the lamp is made of glass, do not drop the unit and do not scratch the glass.



Do not reuse the old lamp. This could cause the lamp to explode.



Be sure to turn off the projector and unplug the AC power cord before replacing the lamp.



Do not use the projector with the lamp cover removed.

EN-44

Ceiling mount installation

1. To prevent damage to your projector, please use the Optoma ceiling mount.

2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications:

 Screw type: M4*3  Maximum screw length: 8mm  Minimum screw length: 6mm

55.0

82.3

110 .0

Lens

Unit: mm

68.5

73.1

Note



Please note that damage resulting from incorrect installation will void the warranty.

Warning

1.If you buy a ceiling mount from another company, please be sure to use the correct screw size. Screw length will vary depending on the thickness of the mounting plate.

2.Be sure to keep at least 10 cm gap between the ceiling and the bottom of the projector.

3.Avoid installing the projector near a heat source.

EN-45

Compatibility Modes

Computer Compatibility

Signal Resolution Refresh Rate(Hz) Notes for Mac

VGA 640 X 480 60/67/72/85 Mac 60/72/85

SVGA 800 X 600 60(*2)/72/85/120(*2) Mac 60/72/85

XGA 1024 X768 60(*2)/70/75/85/

120(*2)

HDTV(720P) 1280 X 720 50/60(*2)/120(*2) Mac 60

WXGA 1280 X768 60/75/85 Mac 60/75/85

1280 X800 60 Mac 60 1366 x 768 60 Mac 60

SXGA 1280 X1024 60 Mac 60/75

SXGA+ 1400 X1050 60

UXGA 1600 X 1200 60

HDTV(1080p) 1920 X1080 60 Mac 60

WUXGA 1920 X1200(*1) 60 Mac 60

(*1)1920 x 1200 @60hz only support reduced blanking (*2) 3D timing for True 3D projector

Input Signal for HDMI

Signal Resolution Refresh Rate(Hz) Notes for Mac VGA 640 X 480 60 Mac 60/72/85 SVGA 800 X 600 60(*2)/72/85/120(*2) Mac 60/72/85 XGA 1024 X 768 60(*2)/70/75/85/120(*2) Mac 60/70/75/85 SDTV(480I) 640 X 480 60 SDTV(480P) 640 X 480 60 SDTV(576I) 720 X 576 50 SDTV(576P) 720 X 576 50 WSVGA(1024X600) 1024 X 600 60 HDTV(720p) 1280 X 720 50(*2)/60/120(*2) Mac 60

WXGA

WXGA+ 1440 x 900 60 Mac 60 SXGA 1280 X1024 60/75/85 Mac 60/75 SXGA+ 1400 X1050 60 UXGA 1600 X 1200 60 HDTV(1080I) 1920 X1080 50/60 HDTV(1080p) 1920 X1080 24/30/50/60 Mac 60 WUXGA 1920 X1200(*1) 60 Mac 60

(*1)1920 x 1200 @60hz only support reduced blanking (*2)3D timing for True 3D projector

1280 X768 60/75/85 Mac 75 1280 X800 60 Mac 60 1366 x 768 60 Mac 60

Mac 60/70/75/85

EN-46

True 3D Video Compatibility table

HDMI 1.4a 3D Input

Input Resolutions



If 3D input is 1080p@24hz, the DMD should replay with integral multiple with 3D mode



1080i@25hz and 720p@50hz will run in 100hz; other 3D timing will run in 120hz

HDMI 1.3 1920 x 1080i @ 50Hz

Input timing 1280 X 720P @ 50Hz Top - and - Bottom 1280 X 720P @ 60Hz Top - and - Bottom 1280 X 720P @ 50Hz Frame packing 1280 X 720P @ 60Hz Frame packing 1920 X 1080i @50 Hz Side- by-Side (Half) 1920 X 1080i @60 Hz Side- by-Side (Half) 1920 X 1080P @24 Hz Top - and - Bottom 1920 X 1080P @24 Hz Frame packing

1920 x1080i @ 60Hz 1280 x 720P @ 50Hz 1280 x 720P @60Hz

1920 x 1080i @ 50Hz 1920 x1080i @ 60Hz 1280 x 720P @ 50Hz 1280 x 720P @60Hz

480i HQFS 3D format is

Side-bySide(Half)

Top-andBottom

SBS mode is on

TAB mode is on

Frame sequential

Video Compatibility

NTSC NTSC M/J, 3.58MHz, 4.43MHz

PAL PAL B/D/G/H/I/M/N, 4.43MHz

SECAM SECAM B/D/G/K/K1/L, 4.25/4.4 MHz

Component 480i/p, 576i/p, 720p(50/60Hz), 1080i(50/60Hz)

1080P(24/50/60Hz) SDTV 480i/p, 576i/p HDTV 720p(50/60Hz), 1080i(50/60Hz), 1080P(50/60Hz)

EN-47

IR Code

Customer code: 32CD Key code Printing-key definition

81 Power on/off 3E Switch

C3 Source

97 User C4 Re-Sync CB L

CC R

C6 Up arrow C8 Left arrow C9 Right arrow C7 Down arrow

EN-48

C5 Enter CA Enter

N/A Laser

C1 Page+

95 Mode

C2 Page-

85 Keystone+

84 Keystone-

8C Volume +

8F Volume -

87 Brightness/1

88 Menu/2

89 Zoom/3

86 HDMI/4

8B Freeze/5

8A AV mute/6

83 S-Video/7

8E VGA/8

8D Video/9

94 Contrast

96 Eco

93 3D

The IR codes below are for user-defined remote only.

79 Power off (single push)

82 Power off

80 Power on

9A VGA2

EN-49

RS232 Commands and Protocol Function List

RS232 Pin Assignments

D-Sub 9 pin

(from the projector side)

11 CD

2RXD

3TXD

4DTR

5GND

6DSR

7RTS

8CTS

9RI

RS232 Protocol Function List

Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F

Note



There is a <CR> after all ASCII commands.



0D is the HEX code for <CR> in ASCII code.

XX=01-99, projector's ID, XX=00 is for all projectors

Wire List

(from the cable side)

C1 COLOR C2

1 Black 1

2Brown3

3Red2

4 Orange 6

5 Yellow 5

6Green4

7Blue8

8 Purple 7

9White9

SHELL DW SHELL

EN-50

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

SEND to projector

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

232 ASCII Code HEX Code Function

Description

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------~XX01 1 7E 30 30 30 31 20 31 0D Resync ~XX02 1 7E 30 30 30 32 20 31 0D AV Mute On ~XX02 0 7E 30 30 30 32 20 30 0D Off (0/2 for backward compatible) ~XX03 1 7E 30 30 30 33 20 31 0D Mute On ~XX03 0 7E 30 30 30 33 20 30 0D Off (0/2 for backward compatible) ~XX04 1 7E 30 30 30 34 20 31 0D Freeze ~XX04 0 7E 30 30 30 34 20 30 0D Unfreeze (0/2 for backward compatible) ~XX05 1 7E 30 30 30 35 20 31 0D Zoom Plus ~XX06 1 7E 30 30 30 36 20 31 0D Zoom Minus ~XX12 1 7E 30 30 31 32 20 31 0D Direct Source Commands HDMI ~XX12 5 7E 30 30 31 32 20 35 0D VGA1 ~XX12 6 7E 30 30 31 32 20 36 0D VGA 2 ~XX12 8 7E 30 30 31 32 20 38 0D VGA1 Component ~XX12 9 7E 30 30 31 32 20 39 0D S-Video ~XX12 10 7E 30 30 31 32 20 31 30 0D Vid eo ~XX12 13 7E 30 30 31 32 20 31 33 0D VG A 2 Component

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ~XX20 1 7E 30 30 32 30 20 31 0D Display Mode Presentation ~XX20 2 7E 30 30 32 30 20 32 0D Bright ~XX20 3 7E 30 30 32 30 20 33 0D Movie ~XX20 4 7E 30 30 32 30 20 34 0D sRGB ~XX20 5 7E 30 30 32 30 20 35 0D User ~XX20 7 7E 30 30 32 30 20 37 0D Blackboard ~XX20 9 7E 30 30 32 30 20 39 0D 3D

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------~XX21 n 7E 30 30 32 31 20 a 0D Brightness n = -50 (a=2D 35 30) ~ 50 (a=35 30) ~XX22 n 7E 30 30 32 32 20 a 0D Contrast n = -50 (a=2D 35 30) ~ 50 (a=35 30) ~XX23 n 7E 30 30 32 33 20 a 0D Sharpness n = 1 (a=31) ~ 15 (a=31 35)

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

~XX24 n 7E 30 30 32 34 20 a 0D Color Settings/White Red n = -50 (a=2D 35 30) ~ 50 (a=35 30) ~XX25 n 7E 30 30 32 35 20 a 0D Green n = -50 (a=2D 35 30) ~ 50 (a=35 30) ~XX26 n 7E 30 30 32 36 20 a 0D Blue n = -50 (a=2D 35 30) ~ 50 (a=35 30) ~XX33 1 7E 30 30 33 33 20 31 0D Reset

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------~XX34 n 7E 30 30 33 34 20 a 0D BrilliantColor ~XX35 1 7E 30 30 33 35 20 31 0D Gamma Film ~XX35 2 7E 30 30 33 35 20 32 0D Video ~XX35 3 7E 30 30 33 35 20 33 0D Graphics ~XX35 4 7E 30 30 33 35 20 34 0D Standard

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------~XX36 1 7E 30 30 33 36 20 31 0D Color Temp. Warm ~XX36 2 7E 30 30 33 36 20 32 0D Medium ~XX36 3 7E 30 30 33 36 20 33 0D Cold ~XX37 1 7E 30 30 33 37 20 31 0D Color Space Auto ~XX37 2 7E 30 30 33 37 20 32 0D RGB\ RGB(0-255) ~XX37 3 7E 30 30 33 37 20 33 0D YUV ~XX37 4 7E 30 30 33 37 20 34 0D RGB(16 - 235) ~XX73 n 7E 30 30 37 33 20 a 0D Signal Frequency n = -5 (a=2D 35) ~ 5 (a=35) By signal ~XX91 n 7E 30 30 39 31 20 a 0D Automatic n = 0 disable; n = 1 enable ~XX74 n 7E 30 30 37 34 20 a 0D Phase n = 0 (a=30) ~ 31 (a=33 31) By signal ~XX75 n 7E 30 30 37 35 20 a 0D H. Position n = -5 (a=2D 35) ~ 5 (a=35) By timing ~XX76 n 7E 30 30 37 36 20 a 0D V. Position n = -5 (a=2D 35) ~ 5 (a=35) By timing

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------~XX45 n 7E 30 30 34 34 20 a 0D Color (Saturation) n = -50 (a=2D 35 30) ~ 50 (a=35 30) ~XX44 n 7E 30 30 34 35 20 a 0D Tint n = -50 (a=2D 35 30) ~ 50 (a=35 30))

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

n = 1 (a=30) ~ 10 (a=31 30)

EN-51

~XX60 1 7E 30 30 36 30 20 31 0D Format 4:3 ~XX60 2 7E 30 30 36 30 20 32 0D 16:9 ~XX60 3 7E 30 30 36 30 20 33 0D 16:10(WXGA) ~XX60 5 7E 30 30 36 30 20 35 0D LBX ~XX60 6 7E 30 30 36 30 20 36 0D Native ~XX60 7 7E 30 30 36 30 20 37 0D Auto

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

~XX61 n 7E 30 30 36 31 20 a 0D Edge mask n = 0 (a=30) ~ 10 (a=31 30) ~XX62 n 7E 30 30 36 32 20 a 0D Zoom n = -5 (a=2D 35) ~ 25 (a=32 35) ~XX63 n 7E 30 30 36 33 20 a 0D H Image Shift n = -100 (a=2D 31 30 30) ~ 100 (a=31 30 30) ~XX64 n 7E 30 30 36 34 20 a 0D V Image Shift n = -100 (a=2D 31 30 30) ~ 100 (a=31 30 30) ~XX66 n 7E 30 30 36 36 20 a 0D V Keystone n = -40 (a=2D 34 30) ~ 40 (a=34 30) ~XX230 1 7E 30 30 32 33 30 20 31 0D 3D Mode DLP-Link ~XX230 3 7E 30 30 32 33 30 20 31 0D 3D Mode IR ~XX400 0 7E 30 30 34 30 30 20 30 0D 3DШ2D 3D ~XX400 1 7E 30 30 34 30 30 20 31 0D L ~XX400 2 7E 30 30 34 30 30 20 32 0D R ~XX405 0 7E 30 30 34 30 35 20 30 0D 3D Format Auto ~XX405 1 7E 30 30 34 30 35 20 31 0D SBS ~XX405 2 7E 30 30 34 30 35 20 32 0D Top and Bottom ~XX405 3 7E 30 30 34 30 35 20 33 0D Frame sequential ~XX231 0 7E 30 30 32 33 31 20 30 0D 3D Sync Invert On ~XX231 1 7E 30 30 32 33 31 20 31 0D 3D Sync Invert Off

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

~XX70 1 7E 30 30 37 30 20 31 0D Language English ~XX70 2 7E 30 30 37 30 20 32 0D German ~XX70 3 7E 30 30 37 30 20 33 0D French ~XX70 4 7E 30 30 37 30 20 34 0D Italian ~XX70 5 7E 30 30 37 30 20 35 0D Spanish ~XX70 6 7E 30 30 37 30 20 36 0D Portuguese ~XX70 7 7E 30 30 37 30 20 37 0D Polish ~XX70 8 7E 30 30 37 30 20 38 0D Dutch ~XX70 9 7E 30 30 37 30 20 39 0D Swedish ~XX70 10 7E 30 30 37 30 20 31 30 0D Norwegian/Danis h ~XX70 11 7E 30 30 37 30 20 31 31 0D F innish ~XX70 12 7E 30 30 37 30 20 31 32 0D G reek ~XX70 13 7E 30 30 37 30 20 31 33 0D T raditional Chinese ~XX70 14 7E 30 30 37 30 20 31 34 0D Sim plified Chinese ~XX70 15 7E 30 30 37 30 20 31 35 0D J apanese ~XX70 16 7E 30 30 37 30 20 31 36 0D Korea n ~XX70 17 7E 30 30 37 30 20 31 37 0D Russ ian ~XX70 18 7E 30 30 37 30 20 31 38 0D Hunga rian ~XX70 19 7E 30 30 37 30 20 31 39 0D Czec h ~XX70 20 7E 30 30 37 30 20 32 30 0D Arabi c ~XX70 21 7E 30 30 37 30 20 32 31 0D T hai ~XX70 22 7E 30 30 37 30 20 32 32 0D T urkish ~XX70 23 7E 30 30 37 30 20 32 33 0D F arsi ~XX70 25 7E 30 30 37 30 20 32 33 0D Vie tnamese ~XX70 26 7E 30 30 37 30 20 32 33 0D I ndonesian ~XX70 27 7E 30 30 37 30 20 32 33 0D Roma nian

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

~XX71 1 7E 30 30 37 31 20 31 0D Projection Front-Desktop ~XX71 2 7E 30 30 37 31 20 32 0D Rear-Desktop ~XX71 3 7E 30 30 37 31 20 33 0D Front-Ceiling ~XX71 4 7E 30 30 37 31 20 34 0D Rear-Ceiling

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

~XX72 1 7E 30 30 37 32 20 31 0D Menu Location Top Left ~XX72 2 7E 30 30 37 32 20 32 0D Top Right ~XX72 3 7E 30 30 37 32 20 33 0D Centre ~XX72 4 7E 30 30 37 32 20 34 0D Bottom Left ~XX72 5 7E 30 30 37 32 20 35 0D Bottom Right

(WXGA only)

~XX90 1 7E 30 30 39 31 20 31 0D Screen Type 16:10 ~XX90 0 7E 30 30 39 31 20 30 0D 16:9

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

EN-52

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

~XX77 n 7E 30 30 37 37 20 aabbcc 0D Security Security Timer Month/Day/Hour n = mm/dd/hh mm= 00 (aa=30 30) ~ 12 (aa=31 32) dd = 00 (bb=30 30) ~ 30 (bb=33 30) hh= 00 (cc=30 30) ~ 24 (cc=32 34)

~XX78 1 7E 30 30 37 38 20 31 0D Security Settings Enable ~XX78 0 ~nnnn 7E 30 30 37 38 20 32 20 a 0D Disable(0/2 for backward compatible) ~nnnn = ~0000 (a=7E 30 30 30 30) ~9999 (a=7E 39 39 39 39)

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

~XX79 n 7E 30 30 37 39 20 a 0D Projector ID n = 00 (a=30 30) ~ 99 (a=39 39)

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

~XX82 1 7E 30 30 38 32 20 31 0D Logo Default ~XX82 3 7E 30 30 38 32 20 33 0D Neutral ~XX88 0 7E 30 30 38 38 20 30 0D Closed Captioning Off ~XX88 1 7E 30 30 38 38 20 31 0D cc1 ~XX88 2 7E 30 30 38 38 20 32 0D cc2 ~XX89 0 7E 30 30 38 39 20 30 0D Audio Input Default ~XX89 1 7E 30 30 38 39 20 31 0D Audio1

~XX89 3 7E 30 30 38 39 20 33 0D Audio2

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------~XX100 1 7E 30 30 31 30 30 20 31 0D Source Lock On ~XX100 0 7E 30 30 31 30 30 20 30 0D Of f (0/2 for backward compatible) ~XX101 1 7E 30 30 31 30 31 20 31 0D High Altitude O n ~XX101 0 7E 30 30 31 30 31 20 30 0D Of f (0/2 for backward compatible) ~XX102 1 7E 30 30 31 30 32 20 31 0D Information Hide On ~XX102 0 7E 30 30 31 30 32 20 30 0D Of f (0/2 for backward compatible) ~XX103 1 7E 30 30 31 30 33 20 31 0D Keypad Lock On ~XX103 0 7E 30 30 31 30 33 20 30 0D Off (0/2 for backward compatible) ~XX195 0 7E 30 30 31 39 35 20 30 0D Test Pattern None ~XX195 1 7E 30 30 31 39 35 20 31 0D Grid ~XX195 2 7E 30 30 31 39 35 20 32 0D White Pattern

~XX11 0 7E 30 30 31 31 20 30 0D IR Function Off ~XX11 1 7E 30 30 31 31 20 31 0D On

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

~XX104 1 7E 30 30 31 30 34 20 31 0D Background Color Blue ~XX104 2 7E 30 30 31 30 34 20 32 0D Black ~XX104 3 7E 30 30 31 30 34 20 33 0D Red ~XX104 4 7E 30 30 31 30 34 20 34 0D Green ~XX104 5 7E 30 30 31 30 34 20 35 0D White

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

EN-53

~XX105 1 7E 30 30 31 30 35 20 31 0D Advanced Direct Power On On ~XX105 0 7E 30 30 31 30 35 20 30 0D Off (0/2 for backward compatible) ~XX106 n 7E 30 30 31 30 36 20 a 0D Auto Power Off (min) n = 0 (a=30) ~ 180 (a=31 38 30) ~XX107 n 7E 30 30 31 30 37 20 a 0D Sleep Timer (min) n = 0 (a= 30) ~ 990 (a=39 39 39) ~XX115 1 7E 30 30 31 31 35 20 31 0D Quick Resume On ~XX115 0 7E 30 30 31 31 35 20 30 0D Off (0/2 for backward compatible) ~XX114 1 7E 30 30 31 31 34 20 31 0D Power Mode(Standby) Eco.(<=0.5W) ~XX114 0 7E 30 30 31 31 34 20 30 0D Active (0/2 for backward compatible)

~XX110 1 7E 30 30 31 31 30 20 31 0D Brightness Mode Bright ~XX110 3 7E 30 30 31 31 30 20 33 0D Eco ~XX110 4 7E 30 30 31 31 30 20 34 0D Dynami c

~XX111 1 7E 30 30 31 31 31 20 31 0D Lamp Reset Yes ~XX111 0 7E 30 30 31 31 31 20 30 0D No (0/2 for backward compatible)

~XX322 0 7E 30 30 33 32 32 20 30 0D Filter Reminder Off ~XX322 1 7E 30 30 33 32 32 20 31 0D 300 hr ~XX322 2 7E 30 30 33 32 32 20 32 0D 500 hr ~XX322 3 7E 30 30 33 32 32 20 33 0D 800 hr ~XX322 4 7E 30 30 33 32 32 20 34 0D 1000 hr ~XX323 1 7E 30 30 33 32 33 20 31 0D Filter Reset Yes ~XX323 0 7E 30 30 33 32 33 20 30 0D No

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

~XX112 1 7E 30 30 31 31 32 20 31 0D Reset Yes

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------~XX99 1 7E 30 30 39 39 20 31 0D RS232 Alert Reset Reset System Alert ~XX210 n 7E 30 30 32 30 30 20 n 0D Display message on the OSD n: 1-30 characters

-----------------------------------------------------------------------------------------------------------------------------

SEND to emulate Remote

~XX140 10 7E 30 30 31 34 30 20 31 30 0D Up ~XX140 11 7E 30 30 31 34 30 20 31 31 0D Left ~XX140 12 7E 30 30 31 34 30 20 31 32 0D Enter (for projection MENU) ~XX140 13 7E 30 30 31 34 30 20 31 33 0D Right ~XX140 14 7E 30 30 31 34 30 20 31 34 0D Down ~XX140 15 7E 30 30 31 34 30 20 31 35 0D Keystone + ~XX140 16 7E 30 30 31 34 30 20 31 36 0D Keystone – ~XX140 17 7E 30 30 31 34 30 20 31 37 0D Volume – ~XX140 18 7E 30 30 31 34 30 20 31 38 0D Volume + ~XX140 19 7E 30 30 31 34 30 20 31 39 0D Brightness ~XX140 20 7E 30 30 31 34 30 20 32 30 0D Menu ~XX140 21 7E 30 30 31 34 30 20 32 31 0D Zoom ~XX140 28 7E 30 30 31 34 30 20 32 38 0D Contrast

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

SEND from projector automatically

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

232 ASCII Code HEX Code Function Projector Return Description

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------when Standby/Warming/Cooling/Out of Range/Lamp fail/Fan Lock/Over Temperature/ Lamp Hours Running Out/Cover Open

INFOn n : 0/1/2/3/4/6/7/8/ =

Standby/Warming/Cooling/Out of Range/Lamp fail/Fan Lock/Over Temperature/Lamp Hours Running Out/Cov er Open

EN-54

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

READ from projector

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

232 ASCII Code HEX Code Function Projector Return Description

~XX121 1 7E 30 30 31 32 31 20 31 0D Input Source Commands OKn n: 0/1/2/3/4/5=

~XX122 1 7E 30 30 31 32 32 20 31 0D Software Version OKdddd dddd: FW version ~XX123 1 7E 30 30 31 32 33 20 31 0D Display Mode OKn n : 0/1/2/3/4/5/6/7/ None/Presentation/Bright/Movie/sRGB/User/Blackboard./3D

~XX124 1 7E 30 30 31 32 34 20 31 0D Power State OKn n : 0/1 = Off/On ~XX125 1 7E 30 30 31 32 35 20 31 0D Brightness OKn ~XX126 1 7E 30 30 31 32 36 20 31 0D Contrast OKn ~XX127 1 7E 30 30 31 32 37 20 31 0D Aspect Ratio OKn

*16:9 or 16:10 depend on Screen Type setting ~XX128 1 7E 30 30 31 32 38 20 31 0D Color Temperature OKn n : 0/1/2 = Warm/Medium/Cold ~XX129 1 7E 30 30 31 32 39 20 31 0D Projection Mode OKn n : 0/1/2/3 = Front-Desktop/ RearDesktop/ Front-Ceiling/ Rear-Ceiling

~XX150 1 7E 30 30 31 35 30 20 31 0D Information OKabbbbccdddde a : 0/1 = Off/On bbbb: LampHour cc: source 00/01/02/03/04/05/ = None/VGA1/VGA2/Video/S-Video/HDMI dddd: FW version e : Display mode 0/1/2/3/4/5/6/7

None/Presentation/Bright/Movie/sRGB/User/ Blackboard/3D

~XX151 1 7E 30 30 31 35 31 20 31 0D Model name OKn n:1/2/3/4/5=

S2010/S2015/X2010/X2015/W2015

~XX108 1 7E 30 30 31 30 38 20 31 0D Lamp Hours OKbbbb bbbb: LampHour ~XX108 2 7E 30 30 31 30 38 20 31 0D Cumulative Lamp Hours OKbbbbb bbbbb: (5 digits) Total Lamp Hours ~XX321 1 7E 30 30 33 32 31 20 31 0D Filter Usage Hours OKbbbb bbbb: Filter Usage Hours

(WXGA) n: 0/1/2/3/4 = 4:3/16:9 or

(SVGA/XGA) n: 0/1/2/3/4 = 4:3/16:9/LBX/Native/AUTO

None/VGA1/VGA2/Video/SVideo/HDMI

16:10/LBX/Native/AUTO

EN-55

Troubleshooting

Refer to the symptoms and measures listed below before sending the projector for repairs. If the problem persists, contact your local reseller or service center. Please refer to "LED Indicator Messages" as well.

Start-up

If no lights turn on:



Be sure that the power cord is securely connected to the projector and the

other end

 Press the power button again.



Unplug the power cord and wait for a short while, then plug it in and press

the power

Image

If the searching source is displayed:



Press

an active input source.

 Be sure the external source is turned on and connected.



For a computer connection, ensure your notebook computer’s external

video port is

If the image is out of focus:



While displaying the on-screen menu, adjust the focus ring. (The image size should focus.)

 Check the projection lens to see if it needs cleaning.

If the image is flickering or unstable for a computer connection:

 Press

Frequency.

Remote control

If the remote control does not operate:

 Be sure nothing is blocking the remote control receiver on the front of the

projector. Use the remote control within the effective range.

 Aim the remote control at the screen or at the front of the projector.



Move the remote control so it is more directly in front of the projector and not as far to the side.

is plugged into an outlet with power.

button again.

SOURCE

“

Menu”, go to IMAGE > Advanced > Signal and adjust Phase or

on the projector or

turned on. Refer to the computer manual.

not change; if it does, you are adjusting the zoom, not the

Source

on the remote control

to select

EN-56

LED Indicator Messages

Message Power LED

Standby State

(Input power

cord)

Power on

(Warming)

Power on & Lamp

lighting

Power off

(Cooling)

Quick Resume

(100 secs)

Error

(Lamp fail)

Error

(Fan fail)

Error

(Over Temp)

Standby State

(Burn in mode)

Burnin

(Warming)

Burnin

(Cooling)

Steady light

(Red)

Flashing Steady light

Flashing Flashing

Flashing Steady light

Power LED

(Green)

Flashing

0.5 sec off

0.5 sec light Steady light

Flashing

0.5 sec off

0.5 sec light

Back to Red

steady light when

cooling fan turns

off

Flashing

0.25 sec off

0.25 sec light

Flashing

Temp LE D

(Red)

Lamp LED

(Red)

EN-57

Optoma Global Offices

For service or support please contact your local office.

USA

3178 Laurelview Ct. Fremont, CA 94538, USA 888-289-6786 www.optomausa.com services@optoma.com

Canada

3178 Laurelview Ct. Fremont, CA 94538, USA 888-289-6786 www.optomausa.com services@optoma.com

Europe

42 Caxton Way, The Watford Business Park

Watford, Hertfordshire, WD18 8QZ, UK +44 (0) 1923 691 800 www.optoma.eu +44 (0) 1923 691 888 Service Tel : +44 (0)1923 691865 service@tsc-europe.com

France

Batiment E +33 1 41 46 12 20 81-83 avenue Edouard Vaillant +33 1 41 46 94 35 92100 Boulogne Billancourt, France savoptoma@optoma.fr

Spain

C/ Jose Hierro,36 Of. 1C +34 91 499 06 06 28522 Rivas VaciaMadrid, +34 91 670 08 32 Spain

Deutschland

Wiesenstrasse 21 W +49 (0) 211 506 6670 D40549 Dusseldorf, +49 (0) 211 506 66799 Germany info@optoma.de

EN-58

Scandinavia

Lerpeveien 25 +47 32 98 89 90 3040 Drammen +47 32 98 89 99 Norway info@optoma.no PO.BOX 9515 3038 Drammen Norway

Latin America

3178 Laurelview Ct. Fremont, CA 94538, USA 888-289-6786 www.optoma.com.br www.optoma.com.mx

Korea

WOOMI TECH.CO.,LTD. 4F,Minu Bldg.33-14, Kangnam-Ku, +82+2+34430004 seoul,135-815, KOREA +82+2+34430005

Japan

東京都足立区綾瀬 3-25-18 株式会社オーエスコンタクトセンター：0120-380-495

info@os-worldwide.com

www.os-worldwide.com

Taiwan

12F., No.215, Sec. 3, Beixin Rd., +886-2-8911-8600 Xindian Dist., New Taipei City 231, +886-2-8911-6590 Taiwan, R.O.C. services@optoma.com.tw www.optoma.com.tw asia.optoma.com

Hong Kong

Unit A, 27/F Dragon Centre, 79 Wing Hong Street, +852-2396-8968 Cheung Sha Wan, +852-2370-1222 Kowloon, Hong Kong www.optoma.com.hk

EN-59

中国上海市长宁区凯旋路 1205 号 5 楼

琉璃奥图码

+86-21-62947376 +86-21-62947375

www.optoma.com.cn

EN-60

Regulation & Safety Notices

This appendix lists the general notices of your projector.

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, detectable by turning the equipment in question off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna

 Increase the distance between the equipment and the receiver



Connect the equipment to an outlet on a different circuit than that which the receiver is connected to

 Or consult the dealer or an experienced radio/TV technician for help.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

Caution

Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to operate this projector.

EN-61

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference and

2. This device must accept any interference received, including interference that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-003. Remarque ą l'intention des utilisateurs canadiens Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.

Declaration of Conformity for EU countries

 EMC Directive 2004/108/EC (including amendments)  Low Voltage Directive 2006/95/EC  R & TTE Directive 1999/5/EC (if product has RF function)

Disposal instructions

Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it.

EN-62

Optoma W303ST, DX5100 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual