Optoma Technology Q300 User Manual
User’s Guide
Optoma MirrorBoard
Q300
Index
Chapter 1
3. Overview
Chapter 2
4. Setting-Up the MirrorBoard
5. Install the Software Drivers
6. Microsoft .NET Framework 2.0 “Windows XP only”
9. Wireless USB WinDrivers
10. USB Tablet Manager
11. Power Presenter RE
12. DisplayLink Graphics Adapter Software
13. Connect MirrorBoard to the computer for the first time
15. Calibrate the pen
Chapter 3
16. Using MirrorBoard
i. General Use
ii. Charging
iii. Display Setting
17. Using the Pen
18. Power Presenter RE
21. Touch Buttons
21. Using the MirrorBoard with a Projector
Chapter 4
24. Troubleshooting & FAQ’s
25. Appendix
26. Precautions
2
Chapter 1
Overview
Compatible Operating Systems: Windows XP, Windows Vista or Windows 7
Battery Life: 2.5 hours of continuous use
Resolution: WSVGA (1024 x 600)
The Optoma MirrorBoard gives you the flexibility to control digital content from anywhere in the
room, whether you are projecting a lesson in a classroom or a presentation in a corporate
conference room.
The MirrorBoard connects wirelessly to your computer so that you can interact with digital content
from anywhere in the room (with a range of up to about 30 feet). The MirrorBoard “mirrors” your
computer desktop on a 10.1-inch active matrix screen of the device, and lets you control the cursor
with the included battery-free pen, giving you the same control that you would have if you were
sitting in front of the PC.
When the computer is connected to a projector, presenters then have easy control of images,
applications and content being projected on a screen. Using the included software, the MirrorBoard
can control any application or content. In addition, users have access to annotation and learning
tools.
The MirrorBoard, which integrates a non-slip surface, is designed for ergonomics and a slender
form factor. The display integrates an electromagnetic surface only recognizes the pen as an input,
so that you can naturally rest your hand on MirrorBoard without affecting its performance. The
included pen, which is tethered to avoid loss, does not require batteries. A wireless USB point-topoint connection to your computer eliminates lag time, security risks, connectivity issues and
bandwidth loads common with other wireless technologies.
Battery Indicator
Touch Buttons
10.1-Inch Display
and Pen Surface
Tethered Battery-Free Pen
Power LED
3
On/Off Button
USB Charging port
Power Adapter Port
USB Port for Accessories (e.g.,
mouse, keyboard)
Upper/Lower
Rocker Switch
Chapter 2
Setting-Up the MirrorBoard
There are several tasks that you should perform prior to your first use of the MirrorBoard:
1) Charge MirrorBoard
2) Install Software Drivers
3) Connect MirrorBoard to the Computer for the First Time
4) Calibrate the Pen
Charge MirrorBoard
Charge the MirrorBoard with the included AC adapter for at least four hours prior to first use.
During charging, the battery indicator will be amber. The indicator turns green once the
MirrorBoard is fully charged.
4
Install the Software Drivers
1. Insert the included MirrorBoard CD into your computer disk drive. If the menu does not
automatically open, locate the CD-ROM drive on your PC and double click on “Autorun.exe.”
2. On the MirrorBoard CD Menu, choose the appropriate drivers for your operating system
(Windows XP or Windows 7 / Vista).
3. You will see the following menu:
5
Once you click on Next, the installation of several drivers will commence, one at a time. Windows
may request a restart. Select cancel and do not
Accept all the default values throughout the installations. Drivers include:
a) Microsoft .NET Framework 2.0 (XP only, cancel if already installed)
b) Wireless USB WinDrivers
c) USB Tablet Manager
d) Power Presenter RE
e) DisplayLink Graphics Adapter Software
Choose your desired installation folder:
restart the computer until all drivers are installed.
Microsoft .NET Framework 2.0
Windows XP only:
If Microsoft .NET Framework 2.0 is already installed on your computer, you will see the following
window. Cancel setup. Ignore any error messages.
6
If Microsoft .NET Framework 2.0 is not installed on your computer, you will need to install it using
the installation wizard. Click on Next and follow the directions:
7
8
Loading...