Optoma DH1017 Product Sheet

DH1017

Make a bright impact

High resolution for stunning clarity

Full HD 1080p - 4200 Lumens

Ultimate Control - Full support for Crestron, Extron, AMX, PJ-Link and Telnet LAN
commands

Extensive connectivity - HDMI, DisplayPort, 2 x VGA

DH1017

The Full HD DH1017 produces crystal clear, bright images, perfect for a broad range of applications including technical, advertising media and
medical training where detail really matters.

Full support for Crestron Roomview, Telnet, Extron IP Link, AMX dynamic device discovery and PJ-Link protocols, allow almost all aspects of the
DH1017 to be controlled across a network, keeping you in control, wherever you are

The environmentally friendly DH1017 has energy saving features including <0.5W standby mode and auto power off saving you both time and
money. Our unique Optoma Colour guarantee ensures hassle-free, long-lasting projection.

AMX Compatibility – Dynamic Discovery

IP protocol is incorporated into the DH1017.
This feature allows for easy installation with
AMX control systems

Creston Roomview® - NETWORK CONTROL

RoomView® software provides a custom configurable interface to
monitor, manage and control every device in every room remotely
from any computer

Manage up to 250 projectors at the same time (via master
PC).
Control and alter the projector settings using a simple web
browser page including OSD menu control.
Set up email alerts for warning message
Ideal for large installations in both the educational and
business environments.

Full HD

Full HD (1920 x 1080) has more than twice the resolution of HD
Ready (1280 x 720). DH1017 is compatible with HDTV broadcasts
and high–definition media to project impressive full 1080p images
and video in their original digital brilliance.

RS232 Control

The extensive RS232 command set makes it simple and easy to
control the DH1017 with any control system.

3000:1 contrast ratio 10,000:1 contrast ratio

To achieve the maximum 3500hrs² lamp life time the
projector should be operating in STD mode and the
shut down timer should be enabled to automatically
switch off the projector if it is accidentally left on
when no longer required. Enabling the <0.5W
Standby mode will ensure the minimum energy
consumption when the projector is not being used.

Extensive Connectivity

This native 1080p projector accepts a wide variety of computer and
video input signals.
Connectivity includes: HDMI, DVI-D, dual VGA (SCART/ Component
via adaptor), S-Video, Composite, VGA-Out, RS232 , RJ45 and +12V
trigger.
Two audio inputs for individual PC and video connections enable the
DH1017 to function as an audio switcher and volume controller,
thereby eliminating complicated and costly additional audio hardware
and cabling.

Clear, Focused Images

DarkChip3™ technology from Texas Instruments produces a
stunning 10.000:1 contrast ratio for pin sharp graphics and crystal
clear text. Crisper whites, ultra-rich blacks makes images come alive
and text easier to read

ideal for business and education presentation.

Environmentally Friendly

The DH1017 incorporates energy saving features to conserve power
and extend the lamp life:

Extra Features

Easy lamp replacement from the top cover
Direct power on – start up time is significantly reduced as
standby mode is bypassed when the power cable is inserted
into an active power outlet. This eliminates the need to use
the 'Power' button on the remote control or the projector
keypad.
Signal power on – the projector will power on when it
receives a signal. This eliminates the need to use the 'Power'
button on the remote control or the projector keypad.