Optoma Technology DC300I, DC300 User Manual
1
DC300
Document Camera
USER MANUAL
2
Please read this manual carefully before operating the document camera and keep it for
reference.
PRECAUTIONS
NOTICE: PLEASE READ CAREFULLY BEFORE USE
Use the document camera under the rated electric conditions.
Do not place the document camera on an unstable surface as it may fall, causing
injury or damage.
Do not place this device directly under sunlight or near heaters.
Do not place this device near water.
Keep the camera away from acid or alkali gas.
Do not place this document camera in humid, dusty or windy environments.
The recommended operating environment is:
Temperature: 0ºC - 45ºC (32ºF-113º F)
Humidity: less than 75%
Always unplug BEFORE cleaning the device. Use a damp soft cloth for cleaning.
Do not use volatile solvent.
Immediately unplug and call for professional assistance if equipment functions
abnormally.
Unplug the document camera when not in use.
3
USER MANUAL ............................................................................. 1
1. PARTS IDENTIFICATION .......................................................... 4
2. CONTROL PANEL .....................................................................5
3. INPUTS AND OUTPUTS............................................................ 5
4. REMOTE CONTROL.................................................................. 6
5. CONNECTIONS ......................................................................... 7
5.1. COMPUTER CONNECTION .................................................................................8
5.2. VGA OUTPUT CONNECTION...............................................................................8
6. COMMUNICATE WITH COMPUTER......................................... 9
6.1 COMPUTER REQUIREMENTS .............................................................................9
6.2 USB CAMERA ........................................................................................................9
7. FEATURES...............................................................................15
LIGHT .........................................................................................................................15
ZOOM IN AND ZOOM OUT........................................................................................15
FOCUS ADJUSTMENT ..............................................................................................15
BRIGHTNESS ADJUSTMENT.................................................................................... 15
WHITE BALANCE ADJUSTMENT..............................................................................15
TEXT/PICTURE MODE ..............................................................................................16
IMAGE FREEZE .........................................................................................................16
IMAGE MIRROR.........................................................................................................16
SPLIT SCREEN ..........................................................................................................16
IMAGE SAVE..............................................................................................................16
IMAGE RECALL .........................................................................................................16
USB 2.0 PORT............................................................................................................16
USB IMAGE CAPTURE AND VIDEO RECORDING ..................................................17
8. SPECIFICATION ...................................................................... 18
9. TROUBLE-SHOOTING............................................................ 19
10. PACKING LIST.......................................................................26
4
1.
PARTS IDENTIFICATION
1. Camera
2. LED Light
3. Flexible Camera Arm
4. IR Receiver for Remote Control
5. Interface Panel (VGA Port, Power Input and USB)
6. Control Panel
7. Kensington Lock
7
5
2.
CONTROL PANEL
1. POWER: Turn on/off the power.
2. LAMP: Turn on/off the LED light.
3. AUTO: Perform auto focus, color adjustment and white balance.
4. FOCUS+/-: Adjust focus manually.
5. BRIGHT+/-: Image brightness control.
6. ZOOM+/-: Control image zoom in and zoom out.
3. INPUTS AND OUTPUTS
1. DC 12V: Power input.
2. VGA OUT: VGA (RGB) signal output (15 pin D-SUB).
3. USB: Capture image from connected computer with provided software.
1
5 2 4
4
5 3 6
6
6
3. REMOTE CONTROL
1. Power: Power document camera on and off
2. Video: Video mode
3. Home/Directional Key: Home button
4. Lamp: Turn LED light On/Off
5. Save: Capture the image in display
6. Recall: Image recall mode enabled, display the saved images
7. Auto: Perform auto focus, color adjustment and white balance
8. Split: Split screen enables the comparison between the frozen image and live image
9. Freeze: Freeze/unfreeze the image
7
10. Rotate: Rotate image
11. Sharp+/-: Image sharpness control
12. Computer: Computer mode
13. SXGA/XGA: Switch the output signal between XGA and SXGA
14. Mirror: Output right-and-left, up-and-down mirror image
15. Page +/-: Saved image page up and down when image recall mode is enabled
16. Zoom+/-: Image zoom in and zoom out control
17. Bright+/-: Image brightness control
18. Focus+/-: Adjust focus manually
19. Red+/-: Image chroma control (red)
20. Blue+/-: Image chroma control (blue)
8
5. CONNECTIONS
5.1. COMPUTER CONNECTION
5.2. VGA OUTPUT CONNECTION
Loading...