Optoma APBEFREELL User Manual
User Manual
Optoma NuForce BE Free6
TRUE WIRELESS EARPHONES
Regulatory model name: APBEFREEL
Version: VE 1.5
Contents
1
Item
WHAT’S IN THE BOX
BE Free6 EARPHONES
THE BASICS
Charging your BE Free6
Battery Low Alarm and Battery Status
Bluetooth pairing
Using your BE Free6 earbuds to have stereo sound
Using your BE Free6 right and left earbuds in mono mode
Reset BE Free6 Right earpiece with Left earpiece
Power On/ Power Off
Handling phone calls and Siri/Google Assistant
Listening to music
MISCELLANEOUS
Water resistant
Bluetooth connectivity
Voice prompts list
Disclaimer
Federal Communication Commission Interference statement
CE
NCC
IMDA
Specification
WHAT’S IN THE BOX
2
BE Free6 earphones
Silicon tips (in L/M/S),
CP350 (in S),
Total of 4 pairs ear tips
(CP350 tips already on the earbuds)
Charging case
USB-C Charging cable
Basic user’s manual
Safety Instruction
BE Free6 EARPHONES
3
1. Charging pins
2
3
4
2. Multifunction button (MFB)
3. Microphone
4. LED indicator
The BASICS
4
Charging Your BE Free6
1
2
Although your BE Free6 come with a partially charged battery, it is
recommended that you fully charge your BE Free6 and the charging case
before first use.
Note: Please remove the film between charging pins and the earbuds in
the case before you charge.
1. Place the BE Free6 earbuds into the charging case (1).
The USB-C charging cable should be connected to the USB-C port
on the charging case and to either a PC or a dedicated USB
charger.
When charging, the LED indicator(s) on the earbuds will be in
orange. Once charging is complete the LED Indicator on the
earbuds’ will turn off.
2. When charging, the LED indicator on charging case (2) will flash
white.
Once charging is complete the charging case LED indicators will be
solid white to show how many cycles charge case can fully charge
earbuds.
NOTE:
5
A. It takes up to one and a half hours to fully charge the left/right
earbuds and charging case.
B. To maintain the best performance of the battery, we recommend
that the battery in both the earbuds and charging case are
charged regularly. Do not deplete the battery of the earbuds and
charging case before charging.
C. To check the battery level of the charging case:
Open the top cover and check the number of LEDs that are solid
white.
If the most left LED indicator is white, the battery can fully charge
the earbuds for one cycle.
If the left and middle LED indicators are white, the battery can
fully charge the earbuds for two cycles.
If all three LED indicators are white, the battery can fully charge
the earbuds for three cycles
It is strongly recommended that you charge the charging case
immediately when the most left LED indicator turns orange.
Please note, low battery of the charging case might cause
abnormal functionality such as auto on and auto off.
Battery Low Alarm and Battery Status
When the battery level of the earbuds are low, you will hear the voice
prompt “Battery Low” in your BE Free6 every 4 minutes. The estimated
battery reserve remaining time is less than 15 minutes.
Users with iOS devices and some Android models will be able to view the
earbuds’battery status on their device’s display.
Bluetooth Pairing
6
Loading...