Opto engineering TCZR036 User Manual
1
8X Bi-Telecentric Zoom lenses with motorized control
TCZR036, TCZR072
INSTRUCTION MANUAL
2
INDEX
1. PRODUCT OVERVIEW _____________________________
pag. 3
2. SAFETY WARNINGS _______________________________
pag. 3
3. WARRANTY ______________________________________
pag. 4
4. SPECIFICATIONS _________________________________
pag. 4
4.1 Optical Specifications
4.2 Mechanical Specifications
4.2.1 Mass
4.2.2 Dimensions
4.3 Electrical and Electronics Specifications
4.4 Working Conditions
5. INSTRUCTIONS FOR USE __________________________
pag. 8
5.1 Clamping, turning on and focusing
5.2 How to change magnification
5.2.1 Magnification change by pressing the button
5.2.2 Magnification change by DLL
5.2.3 Alarms, errors and solutions
6. SOFTWARE DEMO _______________________________
pag. 16
6.1 DEMO mode Control Panel
3
1. PRODUC T O VE RVIE W
Zoom Revolver TCZR036 and TCZR072 are zoom lenses that provide up to 4 different magnification
changes. In particular, Zoom Revolver TCZR036 and TCZR072 are varifocal lenses, i.e. they perform
discrete (non-continuous) magnification changes while working at the same fixed working f-number
WF/#.
2. SAFETY WARNINGS
READ CAREFULLY THIS INSTRUCTIONS MANUAL
This document contains the necessary information to use the product properly.
DO NOT INSPECT THE INTERNAL PARTS OF THE PRODUCT.
WARRANTY WILL NOT BE VALID IF PRODUCT IS OPENED
Zoom revolver contains very delicate components that might be permanently
damaged if handled carelessly.
PRODUCT MUST BE ADEQUATELY SHIELDED IF EMPLOYED IN
DUSTY AND HUMID PLACES
DO NOT USE TOGHETER WITH MACHINES THAT GENERATE
STRONG VIBRATIONS
Zoom Revolver might be permanently damaged if deployed in the presence of
strong vibrations and impulsive forces
ZOOM REVOLVER MUST BE PROPERLY CLAMPED BEFORE USAGE
Zoom Revolver must be mechanically constrained by adequate clamps,
specifically where indicated (see Mechanical Specifications)
DO NOT USE THE PRODUCT OUT OF THE FIELDS OF USAGE
MARKED IN THE SPECIFICATIONS.
See paragraph 4 for the Specifications.
4
3. WARRANTY
OPTO ENGINEERING offers a 1-year warranty for products that have been installed according to the
installation instructions supplied. The product will be either replaced or repaired in case of defects
presence in any component. Warranty does not cover parts damaged as a result of incorrect usage.
4. SPEC IF IC ATIONS
4.1 Optical Specifications
The following TCZR036 and TCZR072 optical specifications are relative to a 2/3” detector (8.8 mm x
6.6 mm).
! TCZR036
TCZR036 performs the following 4 magnification changes: 0.250x, 0.500x, 1.000x, 2.000x.
The following table lists usage specifications for each different magnification
ZOOM REVOLVER TC ZR 036
OPTICAL PARAMETERS
MAGNIFICATION
0.250x
0.500x
1.000x
2.000x
Working Distance1
WD [mm]
60mm
60mm
60mm
60mm
F number 2
F/#
12 12 12 12 Telecentricity3
< 0.05
< 0.05
< 0.05
< 0.05
Distortion
< 0.05%
< 0.04%
<0.04%
<0.08%
Field Depth
[mm]
11mm
2.8mm
0.7mm
0.2mm
CTF@50
[lp/mm]
>40%
>35%
>40%
>35%
Object field of view
[mm x mm]
35.2 x 26.4
17.6 x 13.2
8.8 x 6.6
4.4 x 3.3
1
Distance between the front lens and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and
minimum distortion
2
Working F-number: the real F-number of a lens when used as a macro
3
Maximum slope of the principal rays inside the lens
5
! TCZR72
ITCZR072 performs the following 4 magnification changes: 0.125x, 0.250x, 0.500x,
1.000x. The following table lists usage specifications for each different magnification
ZOOM REVOLVER TC ZR 036
OPTICAL PARAMETERS
MAGNIFICATION
0.125x
0.250x
0.500x
1.000x
Working Distance
WD [mm]
153.5mm
153.5mm
153.5mm
153.5mm
F number
F/#
12 12 12 12
Telecentricity
< 0.05
< 0.05
< 0.05
< 0.05
Distortion
< 0.1%
< 0.08%
< 0.05%
<0.07%
Field Depth
[mm]
45mm
11mm
2.8mm
0.7mm
CTF@50
[lp/mm]
>35%
>40%
>35%
>40%
Object field of view
[mm x mm]
70.4 x 52.8
35.2 x 26.4
17.6 x 13.2
8.8 x 6.6
4.2 Mechanical Specifications
4.2.1 Mass
! TCZR036: m = 1.5kg;
! TCZR072: m = 2kg.
6
4.2.2 Dimensions
Refer to the following tables for product dimensions
! TCZR036
! TCZR072
Loading...