Page 1
RACKS
CLASSIC
STANDARD DIGITAL
DATA SHEET
Form 477-060118
Description
The PB4H I/O mounting rack features a 50-pin header connector for easy
interface to computer I/O ports via 50-conductor ribbon cables. The 50-pin
connector also allows direct connection to Optomux (B1), Pamux (B5), and
Mistic (B100) protocol brain boards. Any combination of Opto 22 standard
(Generation 1) digital 5-Volt logic I/O modules can be used with PB4H.
page 1/3
Part
Number
PB4H 4-Channel Rack With Header Connector
Description
Page 2
RACKS
CLASSIC
STANDARD DIGITAL
DATA SHEET
Form 477-060118
Specifications
General Specifications
Operating Temperature
Interface Connectors
Field
Control
Powe r
Compatible I/O Module
Family
Dimensions
page 2/3
0° to 70° C
95%, Relative Humidity
Non-condensing
6-32 Screw Terminals
50-conductor Header
Connector
2-position Screw Terminal
or Opto 22 PBSA/B/C
Power S up ply
Standard (Generation 1)
Digital 5-volt logic
PB4H
Page 3
RACKS
CLASSIC
STANDARD DIGITAL
DATA SHEET
Form 477-060118
Schematics
page 3/3
PB4H
Module
Position
0471 & 2
1453 & 4
2435 & 6
3417 & 8
© 1991–2006 Opto 22. All rights reserved. All trademarks, trade names, logos, and service marks referenced herein belong to their respective companies.
Control
(Header
Connector)
Field
(Terminal
Strip)
1. Even pins on control connector are connected
by etch to common.
2. +VCC and return connected to two point
terminal strips
3. At each module position on the field terminal
strip, the lower number is always connected
to pin 1 of the I/O module.
Loading...