RACKS
CLASSIC
STANDARD
DAT A SHEET
Form 514-010130
Description
The PB16T I/O mounting rack accommodates up to 16 single-channel Opto 22 standard (Generation 1) I/O modules.
It is designed for applications that require barrier strips on both the field and the logic sides. PB16T can be used with 5-volt,
15-volt, and 24-volt logic modules. Features include a status LED and replaceble fuse for each channel.
Part
Number
PB16T 16-Channel I/O Module Rack
Description
page 1/4
DAT A SHEET
Form 514-010130
Specifications
General Specifications
Operating
Temperature
Interface Connector Field 6-32 Screw Terminals
Logic 6-32 Screw Terminals
Compatible I/O Module
Family
0° to 70° C
95% Relative Humidity
Non-condensing
Standard (Generation 1)
RACKS
CLASSIC
STANDARD
page 2/4
Dimensions
PB16T DIMENSIONS
DAT A SHEET
Form 514-010130
Connections
RACKS
CLASSIC
STANDARD
page 3/4
Module
Position
021 & 2
143 & 4
265 & 6
387 & 8
4109 & 10
5 12 11 & 12
6 14 13 & 14
7 16 15 & 16
8 18 17 & 18
9 20 19 & 20
10 22 21 & 22
11 24 23 & 24
12 26 25 & 26
13 28 27 & 28
14 30 29 & 30
15 32 31 & 32
Control
(Terminal
Strip)
Field
(Terminal
Strip)
1. Odd pins on control terminal strip are
connected by etch to VCC return.
2. +VCC and return connected to two-point
terminal strips marked “VCC” and “GND”.
3. At each module position on the field terminal
strip, the lower number is always connected to
pin 1 of the I/O module.
Dimension and specifications are subject to change. All products and/or company names throughout this data sheet are generally trademarks or registered trademarks of their respective companies.
DAT A SHEET
Form 514-010130
RACKS
CLASSIC
STANDARD
page 4/4
Schematics
MODULE CONNECTIONS
© 1991–2001 Opto 22. All rights reserved. All trademarks, trade names, logos, and service marks referenced herein belong to their respective companies.
Loading...