RACKS
CLASSIC
STANDARD
DATA SHEET
Form 456-010201
Description
The PB16HC I/O mounting rack can accommodate up to 16 single-channel digital I/O modules. The PB16HC I/O mounting rack uses
a 50-pin header connector for interface to an Optomux (B1), Pamux (B5), or Mistic (B100) protocol brain board. It also provides an extra row
of terminals for connection of the field loop power.
Part
Number
PB16HC 16-Channel Rack With Header Connector
Description
page 1/3
RACKS
CLASSIC
STANDARD
DATA SHEET
Form 456-010201
Specifications
PB16HC Specifications
Operating Temperature
Interface Connectors
Field
Control 50-conductor Header Connector
Power
Dimensions
0° to 70° C
95% Relative Humidity
Non-condensing
6-32 Screw Terminals
2-position Screw Terminal or
Opto 22 PBSA/B/C Power Supply
PB16HC WITH B1
page 2/3
RACKS
CLASSIC
STANDARD
DATA SHEET
Form 456-010201
Connections
1. Even pins on control connector are connected by etch to common.
2. +VCC and return connected to two-point terminal strips marked “+5V” and “GND”.
3. At each module position on the field terminal strip, the lower number is always connected to pin 1 of the I/O module.
PB16HC Specifications
Module
Position
0471 & 2
1453 & 4
2435 & 6
3417 & 8
4399 & 10
5 37 11 & 12
6 35 13 & 14
7 33 15 & 16
Control
(Header
Connector)
Field
(Terminal
Strip)
Module
Position
8 31 17 & 18
9 29 19 & 20
10 27 21 & 22
11 25 23 & 24
12 23 25 & 26
13 21 27 & 28
14 19 29 & 30
15 17 31 & 32
Control
(Header
Connector)
(Terminal
page 3/3
Field
Strip)
Schematics
© 1991–2001 Opto 22. All rights reserved. All trademarks, trade names, logos, and service marks referenced herein belong to their respective companies.
Loading...