Opto 22 PB16AH Data Sheet

PB16AH I/O Mounting Rack

Description

The PB16AH I/O mounting rack can accommodate up to 16
standard analog I/O modules in any combination. The PB16AH is
designed to interface with Classic style brain boards (Mistic®,
Optomux®, and Pamux®) via a 50-pin header connector.

PB16AH I/O Mounting Rack

Specifications

Operating Temperature 0 to 70 °C

Relative Humidity 95%, Non-condensing

Field Interface Connector 6-32 Screw Terminals

Logic Interface Connector 50-pin Male Header Connector

2-position Screw Terminals to Supply 5 Volts to Brain

Power Interface Connectors

© 2009 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Board. 3-position Screw Terminals to Supply ±15 Volts to
Analog Modules. Screw Terminal for Optional 24-Volt
Loop Supply for Current Loop Modules.

Part Numbers

Part Description

PB16AH 16-channel analog mounting rack

Form 484-090813

PAG E

1

DATA SHEET

PB16AH I/O Mounting Rack

Install 1/8 amp fuse here to use the
24 VDC shared loop source. With fuse
installed, shared loop source + 24
VDC is available at lower B terminal.
Fuses are provided with the AD3 and
DA3 modules.

Dimensions with Optomux Brain Board (P/N B2)

Schematics

PB16AH I/O Mounting Rack

DATA SHEET

PAG E

2

Form 484-090813

© 2009 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.