Opto 22 all products General information

DATA SHEET

Form 1674-191015

PAGE 1

Since its founding in 1974, Opto 22 has been a pioneer in the
development of the solid state relays (SSRs) that enable
communication between machinery and computer networks.

To this day, Opto 22 still sets the world standard for solid state relay
quality and reliability.

Opto 22 offers a complete line of solid-state relays, from the rugged
120/240-volt AC Series to the small footprint MP Series, designed for
mounting on printed circuit boards. All Opto 22 relays feature
4,000 volt optical isolation and are UL and CSA recognized.

The innovative use of room temperature liquid epoxy encapsulation,
coupled with Opto 22's unique heat-spreader technology, are key to
mass-producing what are generally regarded as the world's most
reliable solid-state relays.

Every Opto 22 solid-state relay is subjected to full load test and six
times the rated current surge before and after encapsulation. This
double testing of every part before it leaves the factory means you
can rely on Opto 22 solid-state relays and enables us to guarantee all
Opto 22 SSRs for life.

POWER SERIES SOLID-STATE RELAYS

Opto 22 provides a full range of Power Series relays with a wide
variety of voltage (110–575 volts) and current options (3–45 amps).
All Power Series relays feature 4,000 volts of optical isolation, and have
a high PRV rating.

AC Series

The AC Series offers the ultimate in
solid-state reliability. All AC Power Series
relays feature a built-in snubber and zero
voltage turn on. Transient-proof models
offer self-protection for noisy electrical
environments.

Z SERIES SSRS

The Z Series employs a unique heat
transfer system that makes it possible for
Opto 22 to deliver a low-cost, 10-amp,
solid-state relay in an all-plastic case.

The push-on tool-free quick-connect
terminals make the Z Series ideal for
high-volume OEM applications.

HS SERIES SSRS

The HS Series features an integrated heatsink,
so heat dissipates more easily than in a
standard SSR mounted to the same heatsink.

With the heatsink built-in, you don't have to
select one from a catalog, and installation is
much easier.

DC Series

The DC Series delivers isolated DC
control to large OEM customers
worldwide.

The DC Series is also available with LEDs
that indicate when a control signal is
applied.

These LED input status indicators make it much easier for users to
maintain and troubleshoot their control
systems.

Also, in response to the European Union’s
directive on the Restriction of Hazardous
Substances (RoHS), these relays have been
tested, certified, and stamped as
RoHS-compliant.

PRINTED CIRCUIT SERIES SSRS

Opto 22's Printed Circuit Series allows OEMs to easily deploy
solid-state relays on printed circuit boards. Two unique packages are
available, both of which will switch loads up to four amps.

MP Series

The MP Series packaging is designed
with a minimum footprint to allow
maximum relay density on the printed
circuit board.

P Series

The P Series power relays provide low-profile
for 0.5-inch (12.7 mm) center mounting on
printed circuit boards.

© 2006–2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

More about Opto 22

PRODUCTS

Opto 22 develops and manufactures reliable, easy-to-use, open
standards-based hardware and software products.

Industrial automation, process control, building automation, industrial
refrigeration, remote monitoring, data acquisition, and industrial
internet of things (IIoT) applications worldwide all rely on Opto 22.

groov EPIC® System

Opto 22’s groov Edge Programmable Industrial Controller (EPIC)

system is the culmination of over 40 years of experience in designing

products for the automation industry.

groov EPIC gives you an industrially hardened system with
guaranteed-for-life I/O, a flexible Linux®-based processor with
gateway functions, and software that meets the needs of your
automation and IIoT applications.

groov EPIC I/O

I/O provides the local connection to
sensors and equipment. groov I/O
offers up to 24 channels on each I/O
module, with a spring-clamp
terminal strip, integrated wireway,
swing-away cover, and LEDs
indicating module health and
digital channel status.

groov I/O is hot swappable, UL
Hazardous Locations approved, and
ATEX compliant. Opto 22 I/O is so
reliable, we guarantee it for life.

Optional access to the Linux operating system through a secure
shell (SSH) to download and run custom applications

groov View for building your own device-independent HMI,
viewable on the touchscreen, PCs, and mobile devices.

Node-RED for creating simple logic flows from pre-built nodes
Ignition Edge® from Inductive Automation®, with OPC-UA drivers

to Allen-Bradley®, Siemens®, and other control systems, and
MQTT/Sparkplug communications for efficient IIoT data transfer

Older products

From solid state relays (our first products) to world-famous G4 and
SNAP I/O, to SNAP PAC controllers, older Opto 22 products are still
supported and still doing the job at thousands of installations
worldwide. You can count on us to give you the reliability and service
you expect, now and in the future.

QUALITY

Founded in 1974, Opto 22 has
established a worldwide reputation
for high-quality products. All are
made in the U.S.A. at our
manufacturing facility in Temecula,
California.

Because we test each product twice
before it leaves our factory rather than
testing a sample of each batch, we
can afford to guarantee most solid­state relays and optically isolated I/O
modules for life.

groov EPIC Processor

The heart of the system is the groov EPIC processor. It handles a wide
range of digital, analog, and serial functions for data collection,
remote monitoring, process control, and discrete and hybrid
manufacturing.

In addition, the EPIC provides secure data communications among
physical assets, control systems, software applications, online services,
and more, both on premises and in the cloud.

Configuring and troubleshooting I/O and networking is easier with
the EPIC’s integrated high-resolution color touchscreen. Authorized
users can manage the system locally on the touchscreen or on a
monitor connected via the HDMI or USB ports.

groov EPIC Software

Software included in the groov EPIC controller:

PAC Control engine to run PAC Control strategies and PAC Display
projects

CODESYS Runtime engine to run IEC61131-3 compliant programs
built with CODESYS Development System

© 2001–2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Form 1335-190917