OptiPure WS-20B User Manual
The FXWS-12B
is a single housing water treatment
Takes out hardness minerals that form damaging scale
Snapshot
Foodservice Filtration Systems
system with a drop-in 20” x 4 1/2” high capacity ion
exchange (softening) cartridge that removes calcium and
magnesium hardness minerals from water. The system
also takes out dirt and sediment down to 10 micron. The
system can be used as a point-of-use softening lter; or
it can be applied to a speci c point-of-use down-line in
combination with a primary system.
System Bene ts
Model: FXWS-12B
Part #: 160-00520
ITEM #: __________________ QTY: ________
JOB NAME/NUMBER_____________________
l
(lime-scale).
l
Reduces maintenance frequency and cost, and extends
equipment life.
l
Takes out dirt, rust and sediment down to 10 micron to
protect solenoids, valves and other ttings against wear
and plugging.
l
Improves equipment operating ef ciency.
l
Heavy duty powder-coated steel mounting bracket makes
installation simple.
l
Built-in inlet shut-off and depressurization valves make
changing the lter quick and simple.
l
Only the drop-in cartridge is replaced. No discarding of
metal or plastic quick-change lters.
Application
ESPRESSO - traditional, semi-auto and super-automatic
machines.
TEA BREWERS
STEAM AND COMBI OVENS - low volume countertop
ovens
COMBINATION (Secondary Filtration) - Removes
hardness minerals from water prior to a speci c point-of-use
down-line in combination with a primary system.
Installation Tips
l
Feed-water connection to system should be COLD only.
l
Do not exceed system speci cations for temperature
and pressure.
l
Allow 3” clearance below system for lter housing
removal and cartridge replacement.
l
Connect ltered water line to steam production
connections only. Do not use for condenser water.
l
Detailed installation, operation & maintenance manual
is included with each system.
l
Flush the cartridge for two minutes prior to connecting
equipment.
Model: FXWS-12B
Foodservice Filtration S y s t e m s
Part #: 160-00520
Specications
System
Dimensions
Height x Width X Depth, inches
Connection - Inlet & Outlet 3/4” NPT female
Operating Pressure Range 10-125 psi
Inlet Water Temperature Range 35o -100
Shipping Weight 22 lbs.
Performance
Water Softening Capacity 5,200 grains
Service Flow Rate 2.0 gpm
Sediment Reduction 10 micron
Scale Prevention Ion Exchange
Optional Flush Valve Kit - Part #: 160-52614
28 1/2” x 13 1/2”
x 8 1/2”
(0.7 -8.6 bar)
o
o
(2o -38
C)
( lpm)
(nominal)
F
Dealer/Distributor Info:
Replacement Cartridge(s)
Model Part Number Qty
WS-20B 252-60040 1
It is recommended that lter be changed when softening
capacity is reached or when efuent pressure or ow
becomes inadequate. At a minimum change every six
months.
This product is for commercial use only and must be
installed
and maintained according to manufacturers
guidelines.
Do not use on water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.
Warranty
Systems have a 3 year warranty against defects in
material and workmanship. For complete warranty
information contact OptiPure customer service or go to
www.optipurewater.com.
OptiPure, Mfg. by Procam Controls, Inc.
2605 Technology Dr., Bldg 300
Plano, TX 75074
p: 972.881.9797; f: 972.422.6262
www.optipurewater.com
FXWS-12Bspec109
Loading...